Papers - WATANABE Yoshimi

Fabrication of Metallized Electrospun Copper Nanofiber Webs Reviewed International journal

Ick Soo Kim, Kai Wei, Tomohiro Ohta, Byoung-Suhk Kim and Yoshimi Watanabe

Materials Science Forum   638-642   1719 - 1724   2010.04

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/MSF.638-642.1719

Fabrication of Cu-based Functionally Graded Materials Dispersing Fine SiC Particles by a Centrifugal Mixed-Powder Method Reviewed International journal

Hisashi Sato, Yoshifumi Inaguma, Yoshimi Watanabe

Materials Science Forum   638-642   2160 - 2165   2010.04

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/MSF.638-642.2160

Fabrication of Al-based FGM Containing TiO₂ Nano-Particles by a Centrifugal Mixed-Powder Method Reviewed International journal

Materials Science Forum   631-632   441 - 447   2010.04

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/MSF.631-632.441

Effects of the Processing Temperature of Centrifugal Casting on the Mechanical Properties of Al-Al₃Ti FGMs Reviewed International journal

Shimaa Hassan El-Hadad, Hisashi Sato, Paulo David Sequeira, Yoshimi Watanabe and Yoshihiro Oya-Seimiya

Materials Science Forum   631-632   373 - 378   2010.04

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/MSF.631-632.373

Effect of Casting Condition on Density and Hardness Gradients of Al-Al2Cu Alloy FGM Fabricated by Centrifugal in-situ Method Reviewed International journal

Ken-ichi Tabushi, Hisashi Sato and Yoshimi Watanabe

Materials Science Forum   631-632   449 - 454   2010.04

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/MSF.631-632.449

Development of Compositional Gradient Simulation for Centrifugal Slurry-Pouring Methods Reviewed International journal

Keisuke Kinoshita, Hisashi Sato and Yoshimi Watanabe

Materials Science Forum   631-632   455 - 460   2010.04

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/MSF.631-632.455

FEM Modeling of Severe Plastic Deformation of Ti Embedded in FGM Matrix Composite Reviewed

Saifulnizan Jamian, Yoshimi Watanabe, Hisashi Sato and Eri Miura-Fujiwara

19 - 24   2010.04

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Transport Phenomena of Circular Particles and Fibers in Axially Rotating Drum Reviewed

S. Torii, S. Tanaka and Y. Watanabe

Int. J. Nanoelectronics and Materials   3   71 - 79   2010.02

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Novel Fabrication Method of FGM Containing Nano-Particles - Centrifugal Mixed-Powder Method - Reviewed International journal

Yoshimi Watanabe and Hisashi Sato

Key Engineering Materials   434-435   751 - 756   2010.02

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/KEM.434-435.751

Evaluation of Particle Size and Shape Distributions in Al-Al₃Ni in-situ Functionally Graded Materials Fabricated by a Semi-solid Forming Reviewed International journal

Koichi Matsuda, Yoshimi Watanabe, Hisashi Sato, Ick-soo Kim and Yasuyoshi Fukui

International Journal of Materials and Product Technology   39 ( 1-2 )   108 - 121   2010.01

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1504/IJMPT.2010.034264

Other Link： http://www.inderscience.com/info/inarticle.php?artid=34264

Fabrication of Active Smart Composites by a Centrifugal Mixed-Powder Method

Yoshimi Watanabe, Saifulnizan Jamian, Eri Miura-Fujiwara and Hisashi Sato

Proc. of 11th Japan International SAMPE Symposium & Exhibition (JISSE-11)   ( SMS4-1 )   1 - 5   2009.11

　More details

Publishing type：Research paper (international conference proceedings)  

In-situ Observation of Butterfly-type Martensite in Fe-30wt.%Ni Alloy during Tensile Test using High-Resolution EBSD Reviewed International coauthorship

Hisashi Sato, Stefan Zaefferer and Yoshimi Watanabe

ISIJ International   49 ( 11 )   1784 - 1791   2009.11

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.2355/isijinternational.49.1784

Effects of e Martensite and Dislocation Behavior by Thermomechanical Treatment in Fe-Cr Damping Alloy Reviewed International journal

Yuhei Nishimura, Gwang-Ho Kim, Yoshimi Watanabe, Hisashi Sato, Yoichi Nishino, Hae-Ryong Jung, Chang-Yong Kang and Ick-Soo Kim

Materials Science and Engineering: A   521-522   368 - 371   2009.09

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.msea.2008.09.138

Flexible Photonic Crystal via Alumina Ball Inserted Teflon Tube

Yoshimi Watanabe, Takehiro Hotta and Hisashi Sato

Proceedings of the 10th Asian Textile Conference (ATC-10)   ( G1-P-36 )   1 - 6   2009.09

　More details

Publishing type：Research paper (international conference proceedings)  

Effects of Training Temperature on Damping Capacity in Thermally Cycled Fe-20mass%Mn Alloy Reviewed International journal

Yoshimi Watanabe, Hisashi Sato, Yoichi Nishino and Ick-Soo Kim

Materials Science and Engineering: A   521-522   376 - 379   2009.09

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.msea.2008.09.094

Cu-Ni-Si及びCu-Ni-Be系合金の機械的性質 Reviewed

下平圭太，渡邊千尋，門前亮一，佐藤尚，渡辺義見

銅と銅合金   48 ( 1 )   135 - 139   2009.08

　More details

Publishing type：Research paper (scientific journal)  

Nickel-Aluminides Long-Fiber Reinforced Nickel Matrix Composite fabricated by a Reaction at Narrow Holes Method

Y. Watanabe, H. Sato and S. Miura

Proceedings of 17th International Conference on Composite Materials (ICCM-17, Edinburgh), Published by IOM Communications Ltd   ( D8.3 )   1 - 10   2009.07

　More details

Publishing type：Research paper (international conference proceedings)  

Development of New Composite Materials for Orthopaedic Internal Fixation Consisting of Porous Titanium Alloys and Biode-gradable Calcium Phosphates

E. Kobayashi, Y. Watanabe, T. Kikuchi and T. Sato

Procedings of Processing and Fabrication of Advanced Materials XVIII   1215 - 1220   2009.04

　More details

Publishing type：Research paper (international conference proceedings)  

Novel Method to Evaluate the Net Wear Volume of Bag-filter by Ash Dust Reviewed International journal

Yoshimi Watanabe, Hisashi Sato, Yu Hirai, Ick-soo Kim, Shigeru Hinata and Jooyong Kim

Journal of Hazardous Materials   161 ( 2-3 )   775 - 780   2009.04

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.jhazmat.2008.04.024

Other Link： http://www.sciencedirect.com/science/article/pii/S0304389408005475

Behavior of Submicrocrystalline Aluminum Alloy 1570 under Cyclic Loading Conditions Reviewed International journal

E. Avtokratova, R. Kaibyshev, O. Sitdikov and Y. Watanabe

The Physics of Metals and Metallography   107 ( 3 )   291 - 297   2009.03

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1134/S0031918X09030119

Other Link： http://link.springer.com/article/10.1134/S0031918X09030119