Papers - WATANABE Yoshimi
-
Fabrication of nickel/steel multilayer pipe by reactive centrifugal casting method Reviewed
Masataka Setoguchi,Yasumasa OyaHisashi Sato and Yoshimi Watanabe
Transactions of the JSME (in Japanese) 81 ( 829 ) 15-00245-1 - 15-00245-9 2015.09
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.1299/transjsme.15-00245
Other Link： https://www.jstage.jst.go.jp/article/transjsme/81/829/81_15-00245/_article/-char/ja/
-
Distribution of Microstructure and Cooling Rate in Al-Al2Cu Functionally Graded Materials Fabricated by a Centrifugal Method Reviewed International journal
Yoshimi Watanabe, Yuko Hattori, Hisashi Sato
Journal of Materials Processing Technology 221 197 - 204 2015.07
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.jmatprotec.2015.01.028
Other Link： http://www.sciencedirect.com/science/article/pii/S0924013615000308
-
Temperature Dependence of Reverse Transformation Induced by Shot-peening for SUS 304 Austenitic Stainless Steel Reviewed International journal
Hisashi Sato, Ai Namba, Mayumi Okada, Yoshimi Watanabe
Materials Today: Proceedings 2S S707 - S710 2015.07
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.matpr.2015.07.380
Other Link： http://www.sciencedirect.com/science/article/pii/S2214785315006252
-
Development of FGMs Manufacturing System under Centrifugal Force Reviewed
Yasumasa Oya, Masataka Setoguchi, Yuko Hattori, Naoya Iwata, Hisashi Sato and Yoshimi Watanabe
Journal of Functionally Graded Materials 29 1 - 7 2015.03
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.14957/fgms.29.1
Other Link： https://www.jstage.jst.go.jp/article/fgms/29/0/29_1/_pdf
-
Grain Refinement of Al3Ti Dispersed Aluminum Matrix Composites by Reaction Centrifugal Mixed-Powder Method Reviewed International journal
Kazuya Yamauchi, Takahiro Kunimine, Hisashi Sato and Yoshimi Watanabe
Materials Transactions 56 ( 1 ) 99 - 107 2015.01
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.L-M2014841
Other Link： https://www.jstage.jst.go.jp/article/matertrans/56/1/56_L-M2014841/_article
-
Fabrication of Copper/Diamond Functionally Graded Materials for Grinding Wheels by Centrifugal Sintered-Casting Reviewed International journal
Takahiro Kunimine, Masafumi Shibuya, Hisashi Sato and Yoshimi Watanabe
Journal of Materials Processing Technology 217 294 - 301 2015.01
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.jmatprotec.2014.11.020
Other Link： http://www.sciencedirect.com/science/article/pii/S0924013614004440
-
マルテンサイト相を有したステンレ鋼の局部腐食性におよぼすpH の影響 Reviewed
阿部俊介，斉藤 知，野田和彦，渡辺義見
傾斜機能材料論文集 26 45 - 50 2014.09
Language：Japanese Publishing type：Research paper (scientific journal)
-
Fabrication of Grain Refined Functionally Graded Grinding Wheel Reinforced by Composite Particles and its Application for Drilling of CFRP Reviewed
Kazuya Taniguchi, Hisashi Sato, Yoshimi Watanabe, Kazumasa Kurachi, Hideaki Tsuge
Journal of Functionally Graded Materials 28 1 - 8 2014.05
Language：Japanese Publishing type：Research paper (scientific journal)
This study aims to investigate machinability of carbon fiber reinforced plastic (CFRP) by grain
refined Al based metal bond functionally graded grinding wheel (FGGW) containing diamond-composite
particles. Diamond-composite particles which consist of nano-sized diamond particles and micro-sized green
silicon carbide (GC) abrasive grains have been made by mechanofusion machine (Nobilta). The Al based
metal bond FGGW was fabricated by reaction centrifugal mixed-powder (RCMP) method using mixed-powder
of Al, Ti and diamond-composite particles. Since the formed Al3Ti phase acts as grain refiner, it is expected
that the grain structure of Al matrix in FGGW fabricated by RCMP method with Ti particles becomes more
refined than that fabricated without Ti particles. Using the fabricated FGGW, CFRP drilling tests were
conducted by gyro-driving grinding wheel system. It is found that the FGGW fabricated by RCMP method
with Ti particles have fine-grained Al matrix. It is also found that optimum additive amount of Ti on the
FGGW is 4~6 mass%. It is concluded that the FGGW fabricated by RCMP method with Ti particles has
better machinability of CFRP by gyro-driving grinding wheel system.DOI： 10.14957/fgms.28.1
Other Link： https://www.jstage.jst.go.jp/article/fgms/28/0/28_1/_article
-
Color Tone and Interfacial Microstructure of White Oxide Layer on Commercially Pure Ti and Ti-Nb-Ta-Zr Alloys Reviewed International journal
Eri Miura-Fujiwara, Keisuke Mizushima, Yoshimi Watanabe, Toshihiro Kasuga and Mitsuo Niinomi,
Japanese Journal of Applied Physics 53 ( 11 ) 11RD02-1 - 11RD02-8 2014.04
Language：English Publishing type：Research paper (scientific journal) Publisher：The Japan Society of Applied Physics
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.53.11RD02
-
Microstructural Evolution of Martensite Phase in Fe-Ni Alloy Depending on Temperature of Tensile Deformation Reviewed International journal
Takanori Sonoda, Hisashi Sato, Tomokazu Moritani and Yoshimi Watanabe
Advanced Materials Research 922 716 - 721 2014.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/AMR.922.716
Other Link： http://www.scientific.net/AMR.922.716
-
Fabrication of Self-Lubricating Cu-Based Composite Containing Graphite Particle by Centrifugal Mixed-Powder Casting Reviewed International journal
Hisashi Sato, Wei Wei, Kazuaki Oguri, Motoko Yamada and Yoshimi Watanabe
Materials Science Forum 783-786 1579 - 1589 2014.04
Language：English Publishing type：Research paper (scientific journal)
-
Grain Refinement of Al Cast by Novel Al-Al2.5Cu0.5Ti Refiner Fabricated by Cold Pressing Reviewed International journal
Kunika Yamanaka, Hisashi Sato and Yoshimi Watanabe
Materials Science Forum 783-786 276 - 281 2014.04
Language：English Publishing type：Research paper (scientific journal)
-
2軸回転機構によるCFRPの穴あけ加工におけるダイヤモンド砥粒砥石の研削性能 Reviewed
柘植英明，小川大介，坂東直行，加賀忠士，渡辺義見
砥粒加工学会誌 58 ( No. 3 ) 168 - 172 2014.03
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.11420/jsat.58.168
Other Link： https://www.jstage.jst.go.jp/article/jsat/58/3/58_168/_article/-char/ja/
-
Microstructure of Centrifugal Cast Pipes Fabricated using a or b Brass Machining Chips Reviewed
J. Japan Inst. Met. Mater. 78 ( 2 ) 61 - 67 2014.02
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal) Publisher：The Japan Institute of Metals and Materials
DOI： 10.2320/jinstmet.J2013035
Other Link： https://www.jstage.jst.go.jp/article/jinstmet/78/2/78_J2013035/_article/-char/ja/
-
Microstructure Refinement of Pure Aluminum by Inoculation with Stainless Steel Powders Reviewed
H. Tsukamoto, Y. Komiya, Y. Oshima, H. Sato, and Y. Watanabe
Applied Mechanics and Materials 421 272 - 276 2013.09
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/AMM.421.272
Other Link： https://www.scientific.net/AMM.421.272
-
Grain Refinement of As-Cast Pure Al by Cold-Rolled Al-Ti Alloy Refiner Reviewed International journal
Hisashi Sato, Kentaro Ota, Hiroo Kato, Motooa Furukawa, Miki Azuma, Yoshimi Watanabe, Zuogui Zhang and Kaneaki Tsuzaki
Materials Transactions 54 ( No. 9 ) 1554 - 1564 2013.09
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.MH201322
Other Link： https://www.jstage.jst.go.jp/article/matertrans/54/9/54_MH201322/_article
-
White-Ceramic Conversion on Ti-29Nb-13Ta-4.6Zr Surface for Dental Applications Reviewed International journal
Akiko Obata, Eri Miura-Fujiwara, Akimitsu Shimizu, Hirotaka Maeda, Masaaki Nakai, Yoshimi Watanabe, Mitsuo Niinomi and Toshihiro Kasuga
Advances in Materials Science and Engineering 2013 ( 501621 ) 1 - 9 2013.08
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1155/2013/501621
Other Link： http://www.hindawi.com/journals/amse/2013/501621/
-
Damping Capacity of Fe-17mass% Mn High Damping Alloy with Variant Controlled Microstructure Reviewed International journal
Yoshimi Watanabe, Yuusuke Suga, Hisashi Sato, Hideaki Tsukamoto and Yoichi Nishino
Materials Transactions 54 ( No. 8 ) 1288 - 1294 2013.08
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.ME201305
Other Link： https://www.jstage.jst.go.jp/article/matertrans/54/8/54_ME201305/_article
-
3-Dimensional Microstructural Evaluation of Wear-Induced Layer in Al-Al3Ti Functionally Graded Materials by Serial Sectioning Reviewed
Hisashi Sato, Yusuke Noda and Yoshimi Watanabe;
Materials Transactions 54 ( No. 8 ) 1274 - 1280 2013.08
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.ME201306
Other Link： https://www.jstage.jst.go.jp/article/matertrans/54/8/54_ME201306/_article
-
Formation Behavior of Continuous Graded Composition in Ti-ZrO2 Functionally Graded Material Fabricated by Mixed-Powder Pouring Method Reviewed International journal
Murali Jayachandran, Hideaki Tsukamoto, Hisashi Sato and Yoshimi Watanabe
Journal of Nanomaterials 2013 504631-1 - 504631-8 2013.05
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1155/2013/504631
Other Link： http://www.hindawi.com/journals/jnm/2013/504631/
