Papers - WATANABE Yoshimi
-
Three-Dimensional Analysis of the Number of Grains in Electrostatic Levitation Experimental Sample Reviewed International journal
Koei Kadoi, Yuto Ueda, Yuta Kushiya, Haruka Ueno, Yuji Mabuchi, Chihiro Hadanda, Hirokazu Aoki, Ryosei Saguchi, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Shizuka Nakano, Shinsuke Suzuki
International Journal of Microgravity Science and Application 42 ( 2 ) 420203 -1 - 420203 -17 2025.04
Language：English Publishing type：Research paper (scientific journal)
-
Anisotropic Damping Capacity of Fe-20mass%Mn Alloy by Thermo-mechanical Training Invited Reviewed International journal
Yoshimi Watanabe, Naoya Iwata, Tomokazu Moritani, Hisashi Sato
Journal of Alloys and Compounds 1022 179839-1 - 179839-10 2025.04
Authorship：Lead author, Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：Elsevier
-
Grain Refiner Fabricated by Spark Plasma Sintering for Hypoeutectic Al-Si Alloy Cast and Its Refining Ability Reviewed International journal
Hisashi Sato, Fumiya Nakamura and Yoshimi Watanabe
Japanese Journal of Applied Physics 63 ( 11 ) 11SP12-1 - 11SP12-10 2024.11
Authorship：Last author Language：English Publishing type：Research paper (scientific journal) Publisher：IOPscience
-
Cu/AlN Composite and Functionally Graded Materials with High Strength and High Electrical- and Thermal-Conductivity Fabricated by Spark Plasma Sintering Reviewed International journal
Yoshimi Watanabe, Yoshimasa Ohtawa, Hidetoshi Miyazaki and Hisashi Sato
Japanese Journal of Applied Physics 63 ( 11 ) 111002-1 - 111002-7 2024.11
Authorship：Lead author, Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：IOPscience
-
Formation of Graded TiO2 Layer on Ti Wire by Direct Alternating Current Discharge Plasma at Atmospheric Pressure Invited Reviewed International journal
Yoshimi Watanabe, Naho Mitsuishi, Motoko Yamada, Hisashi Sato, Seigo Takashima and Eri Miura-Fujiwara
Metals 14 ( 11 ) 1207-1 - 1207-15 2024.10
Authorship：Lead author, Corresponding author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.3390/met14111207
-
Crucible-less Processing of Ti with TiC Heterogeneous Nucleation Site Particles by Electrostatic Levitation Reviewed International journal
Yoshimi Watanabe, Goro Takahashi, Ryosei Saguchi, Hisashi Sato, Hirokazu Aoki, Shinsuke Suzuki, Shizuka Nakano, Yuki Watanabe, Chihiro Koyama, Hirohisa Oda and Takehiko Ishikawa
International Journal of Thermophysics 45 144-1 - 144-20 2024.09
Authorship：Lead author, Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：Springer Nature
-
Solid State Bonding of Iron or Steel with Stainless Steels by Spark Plasma Sintering Bonding Invited Reviewed International journal
Yoshimi Watanabe, Takuma Furuhashi, Tadachika Chiba, Tomokazu Moritani and Hisashi Sato
Advanced Engineering Materials 26 ( 16 ) 2400290ｰ1 - 2400290ｰ10 2024.07
Authorship：Lead author, Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：Wiley
-
Effects of Post-Welded Hot Rolling on the Properties of Explosively Welded Mg Alloy/Al Alloy Cladding Plates Reviewed International journal
Mami Mihara-Narita, Mingzhe Bian, Hisashi Sato, Yoshimi Watanabe and Yasumasa Chino
Proceedings of IIW 2024 -International Conference on Welding and Joining- ( FP278 ) 1 - 6 2024.07
Language：English Publishing type：Research paper (international conference proceedings)
-
Elucidation of Solidification Behavior of Ti-6Al-4V under Convection and a Temperature Gradient Using Levitation Methods Reviewed International journal
Chihiro Hanada, Yuji Mabuchi, Koei Kadoi, Yuto Ueda, Yuta Kushiya, Hirokazu Aoki, Ryosei Saguchi, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Yuma Harada, Shumpei Ozawa, Shizuka Nakano, Hirohisa Oda, Chihiro Koyama, Takehiko Ishikawa, Yuki Watanabe, Shinsuke Suzuki
Metallurgical and Materials Transactions B 55 ( 4 ) 2864 - 2879 2024.06
Language：English Publishing type：Research paper (scientific journal) Publisher：Springer
-
Dissolution Behavior of TiC Heterogeneous Nucleation Site Particles in Ti–6Al–4V in Electrostatic Levitation Method Reviewed International journal
Yuji Mabuchi, Chihiro Hanada, Hirokazu Aoki, Koei Kadoi, Yuto Ueda, Yuta Kushiya, Ryosei Saguchi, Kanae Yoneda, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Shumpei Ozawa, Shizuka Nakano, Hirohisa Oda, Chihiro Koyama, Takehiko Ishikawa, Yuki Watanabe and Shinsuke Suzuki
Metallurgical and Materials Transactions B 55 ( 4 ) 2467 - 2484 2024.05
Language：English Publishing type：Research paper (scientific journal) Publisher：Springer
-
Heating Conditions in Electrostatic Levitation Experiments for Grain Refinement of Ti-6Al-4V with TiC Reviewed International journal
Yuji Mabuchi, Hirokazu Aoki, Chihiro Hanada, Yuto Ueda, Koei Kadoi, Yuta Kushiya, Ryosei Saguchi, Kanae Yoneda, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Shumpei Ozawa, Shizuka Nakano, Chihiro Koyama, Hirohisa Oda, Takehiko Ishikawa, Yuki Watanabe, Taro Shimaoka and Shinsuke Suzuki
International Journal of Microgravity Science and Application 41 ( 2 ) 410201-1 - 410201-16 2024.04
Language：English Publishing type：Research paper (scientific journal)
-
Analysis Method for Recalescence Time Obtained Using High-Speed Camera for Solidification Experiments at the Electrostatic Levitation Furnace in the International Space Station Reviewed International journal
Yuji Mabuchi, Chihiro Hanada, Yuto Ueda, Koei Kadoi, Hirokazu Aoki, Ryosei Saguchi, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Shumpei Ozawa, Suguru Shiratori, Shizuka Nakano, Chihiro Koyama, Hirohisa Oda, Takehiko Ishikawa, Yuki Watanabe and Shinsuke Suzuki
International Journal of Microgravity Science and Application 41 ( 1 ) 410101-1 - 410101-11 2024.01
Language：English Publishing type：Research paper (scientific journal)
-
Crystallographic Textures of Al and Al-Mg Alloy Formed by Shot-Peening Reviewed International journal
Hisashi Sato, Mami Mihara-Narita, Yoshimi Watanabe and Satoshi Motozuka
Materials Science Forum 1106 41 - 47 2023.12
Language：English Publishing type：Research paper (international conference proceedings)
DOI： 10.4028/p-OMIw3U
-
Hypervelocity Impact Behavior of Direct Energy Deposition Fabricated Aluminum, Titanium Alloy, and Their Functionally Graded Materials
Ziyi Su, Masahiro Nishida and Yoshimi Watanabe
Proceedings of the 11th International Symposium on Impact Engineering 406 - 415 2023.11
Authorship：Last author Language：English Publishing type：Research paper (international conference proceedings)
-
Effects of Annealing on the Interfacial Microstructure and Mechanical Properties of Explosively Welded AZ80 Magnesium Alloy and A6005C Aluminium Alloy Invited Reviewed International journal
Mami Mihara-Narita, Konosuke Asai, Hisashi Mori, Naobumi Saito, Yasumasa Chino, Hisashi Sato and Yoshimi Watanabe
Welding International 37 ( 10 ) 597 - 606 2023.10
Authorship：Last author Language：English Publishing type：Research paper (scientific journal) Publisher：Taylor & Francis
-
Microstructure and Strength of Ti-6Al-4V Samples Additively Manufactured with TiC Heterogeneous Nucleation Site Particles Invited Reviewed International journal
Yoshimi Watanabe, Shintaro Yamada, Tadachika Chiba, Hisashi Sato, Seiji Miura, Kenshiro Abe and Tomotsugu Kato
Materials 16 ( 17 ) 5974 -1 - 5974 -17 2023.08
Authorship：Lead author, Corresponding author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.3390/ma16175974
-
遠心焼結鋳造法によるAl-(Al3Ti+Diamond)傾斜機能砥石の作製 Reviewed
渡辺義見，伊沢泰彦，山田素子，佐藤尚，國峯崇裕，柘植英明
日本複合材料学会誌 49 ( 4 ) 115 - 124 2023.07
Authorship：Lead author, Corresponding author Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.6089/jscm.49.115
-
Suppression of Bubble Formation in Levitated Molten Samples of Ti6Al4V with TiC for Hetero-3D at the International Space Station (ISS) Reviewed International journal
Chihiro Hanada, Hirokazu Aoki, Yuto Ueda, Koei Kadoi, Yuji Mabuchi, Kanae Yoneda, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Yuma Harada, Shumpei Ozawa, Shizuka Nakano, Chihiro Koyama, Hirohisa Oda, Takehiko Ishikawa, Yuki Watanabe, Taro Shimaoka, and Shinsuke Suzuki
International Journal of Microgravity Science and Application 40 ( 3 ) 400301-1 - 400301-15 2023.07
Language：English Publishing type：Research paper (scientific journal)
-
Atypical Phase Transformation Behavior of Fe-33%Ni Alloys Induced by Shot Peening Reviewed International journal
Hisashi Sato, Takayuki Nishiura, Tomokazu Moritani and Yoshimi Watanabe
Surface & Coatings Technology 462 129470 (11 pages) 2023.06
Authorship：Last author Language：English Publishing type：Research paper (scientific journal)
-
AZ80 マグネシウム合金 /A6005C アルミニウム合金爆発圧着材の接合界面組織および機械的性質に及ぼす焼鈍処理の影響 Reviewed
成田麻未，淺井康之介，森久史，斎藤尚文，千野靖正，佐藤尚，渡辺義見
溶接学会論文集 41 ( 1 ) 107 - 115 2023.02
Authorship：Last author Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2207/qjjws.41.107
-
Effects of Strain-Induced Cyclic Transformation on Microstructure Around Peened Surface of SUS304 Austenitic Stainless Steel Reviewed International journal
Yuji Nakagawara, Hisashi Sato, Tomokazu Moritani, Yoshimi Watanabe
Physica Status Solidi B 259 ( 9 ) 2100603 (6 pages) 2022.09
Language：English Publishing type：Research paper (scientific journal) Publisher：Wiley-VCH GmbH
-
Thermal Stability of L12 Modified Al2.5Cu0.5Ti Particles in Al Matrix Reviewed International journal
Manasi Shrikrishna Yadav, Yoshimi Watanabe and Hisashi Sato
Physica Status Solidi B 259 ( 9 ) 2100603 (7 pages) 2022.09
Language：English Publishing type：Research paper (scientific journal) Publisher：Wiley-VCH GmbH
-
Crystallographic Texture of Pure Cu Formed by Shot-Peening and Its Application Reviewed International journal
Hisashi Sato, Yuya Ito, Golap Kalita and Yoshimi Watanabe
Physica Status Solidi B 259 ( 9 ) 2100550 (10 pages) 2022.09
Language：English Publishing type：Research paper (scientific journal) Publisher：Wiley-VCH GmbH
-
マグネシウム合金 /アルミニウム合金爆着クラッド材における界面の金属組織の特徴 Reviewed
成田麻未，森久史，佐藤尚，渡辺義見，斎藤尚文，千野靖正，花野嘉紀，山田吉徳，箕田正，田中宏樹
軽金属溶接 60 ( 7 ) 288 - 295 2022.07
Language：Japanese Publishing type：Research paper (scientific journal)
-
Grain Refinement of Stainless Steel by Strontium Oxide Heterogeneous Nucleation Site Particles During Laser-Based Powder Bed Fusion Reviewed International journal
Yoshimi Watanabe, Tomoki Yuasa, Hisashi Sato, Satoshi Okubo and Kengo Fujimaki
Journal of Materials Processing Technology 308 ( 117700 ) 1 - 14 2022.07
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal) Publisher：Elsevier
-
マグネシウム/アルミニウム合金爆発圧着材の界面組織，耐食性および機械的性質に及ぼすマグネシウム合金組成の影響 Reviewed
淺井康之介，成田麻未，佐藤尚，渡辺義見，森久史，斎藤尚文，中津川勲，千野靖正
軽金属 72 ( 5 ) 255 - 264 2022.05
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.72.255
-
TiCヘテロ凝固核粒子添加による純アルミニウム積層造形体の組織微細化 Invited Reviewed
渡辺義見，菅野浩行，知場三周，佐藤尚，佐藤直子，中野禅
軽金属 72 ( 5 ) 198 - 205 2022.05
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.72.198
-
Interfacial Design of Cu-SiC Composites by Means of Nano-Diamond/SiC Composite Particles in Pressure Infiltration Casting Reviewed International journal
Takahiro Kunimine, Kazumasa Kurachi and Yoshimi Watanabe
Materials Transaction 63 ( 4 ) 644 - 648 2022.04
Language：English Publishing type：Research paper (scientific journal)
-
Interfacial Microstructure and Mechanical Properties of Explosively Welded Mg/Al Alloy Plates Reviewed International journal
Mami Mihara-Narita, Konosuke Asai, Hisashi Sato, Yoshimi Watanabe, Hisashi Mori, Naobumi Saito and Yasumasa Chino
Journal of Materials Engineering and Performance 31 ( 9 ) 7039 - 7048 2022.04
Language：English Publishing type：Research paper (scientific journal) Publisher：Springer Nature
-
Fabrication of Metal Matrix Composites Having Thermally Unstable Reinforcements by Spark Plasma Sintering Method Reviewed International journal
Yoshimi Watanabe, Yadav Manasi Shrikrishna and Hisashi Sato
Key Engineering Materials 907 130 - 135 2022.01
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
-
Exfoliation Resistance, Microstructure, and Oxide Formation Mechanisms of the White Oxide Layer on CP Ti and Ti–Nb–Ta–Zr Alloys Reviewed International journal
Eri Fujiwara, Soichiro Yamada, Keisuke Mizushima, Masahiko Nishijima, Yoshimi Watanabe, Toshihiro Kasuga and Mitsuo Niinomi
Materials 14 ( 21 ) 6599-1 - 6599-16 2021.11
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.3390/ma14216599
Other Link： https://www.mdpi.com/1996-1944/14/21/6599
-
遠心力混合粉末法への適用に向けた3Dプリンター製石膏鋳型の溶浸，焼成 条件の検討 Reviewed
渡辺義見，長谷川宗平，城井つくし，山田素子，知場三周，佐藤尚
鋳造工学 93 ( 9 ) 525 - 531 2021.09
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.11279/jfes.93.525
-
加圧含浸法におけるNano-Diamond複合化SiC粒子を用いたCu-SiC複合材料の界面設計 Reviewed
國峯崇裕，倉知一正，渡辺義見
銅と銅合金 60 ( 1 ) 271 - 275 2021.08
Language：Japanese Publishing type：Research paper (scientific journal)
-
Effects of Solidification Conditions on Grain Refinement Capacity of TiC in Directionally Solidified Ti6Al4V Alloy Reviewed International journal
Naoki Date, Shunya Yamamoto, Yoshimi Watanabe, Hisashi Sato, Shizuka Nakano, Naoko Sato and Shinsuke Suzuki
Metallurgical and Materials Transactions A 52 ( 8 ) 3609 - 3627 2021.06
Language：English Publishing type：Research paper (scientific journal) Publisher：Springer Nature
-
Effects of Peening Direction on Reverse Transformation Induced by Shot-Peening for Fe-33%Ni Alloy Reviewed International journal
Hisashi Sato, Takuto Tominaga, Tadachika Chiba, Tomokazu Moritani and Yoshimi Watanabe
Materials Science Forum 1016 1252 - 1257 2021.01
Language：English Publishing type：Research paper (scientific journal)
-
TP-1試験鋳型を用いたアルミニウム結晶粒微細化剤評価法の提案 Reviewed
渡辺義見，鍵本亮，岩田壮一郎，山田素子，成田麻未，佐藤尚，嶋﨑真一
軽金属 71 ( 1 ) 8 - 15 2021.01
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.71.8
-
Changes in the Spatial Distributions of Platelet Al3Ti Particles in an Al-Al3Ti Alloy by Equal-Channel Angular Pressing Reviewed International journal
Sarath Babu Duraisamy Hisashi Sato and Yoshimi Watanabe
Materials Characterization 171 ( 110757 ) 1 - 16 2021.01
Language：English Publishing type：Research paper (scientific journal) Publisher：Elsevier
-
Drilling Performance of Nano-Diamond Bonded SiC Composite Abrasives for CFRP Laminates by Dual-Axis Grinding Wheel System Reviewed International journal
Takahiro Kunimine, Kazumasa Kurachi, Hideaki Tsuge, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe
Advanced Composite Materials 30 ( sup2 ) 1 - 16 2021
Language：English Publishing type：Research paper (scientific journal) Publisher：Taylor & Francis
-
Review, Role of L12 Modified (Al1-xMex)3Ti Intermetallic Compounds on Heterogeneous Nucleation of Alpha Aluminum Grains Reviewed International journal
Yoshimi Watanabe
MATEC Web of Conferences 326 ( 06008 ) 1 - 6 2020.11
Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)
-
Microstructural Stability of Ti based Composites Fabricated by Spark Plasma Sintering Reviewed International journal
Yoshimi Watanabe, Miwa Hattori, Tadachika Chiba and Hisashi Sato
MATEC Web of Conferences 321 ( 03023 ) 1 - 6 2020.10
Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)
-
Nucleation Dynamics in Al Solidification with Al-Ti Refiners by Molecular Dynamics Simulation Reviewed International journal
Takuya Fujinaga, Yoshimi Watanabe, Yasushi Shibuta
Computational Materials Science 182 ( 109763 ) 1 - 6 2020.09
Language：English Publishing type：Research paper (scientific journal) Publisher：Elsevier
-
高力黄銅製遠心鋳造材の機械的性質に及ぼす鋳型内に挿入した切削屑形状の影響 Reviewed
大矢泰正，船瀬貴広，佐藤尚，渡辺義見
鋳造工学 92 ( 9 ) 477 - 486 2020.09
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.11279/jfes.92.477
-
3D Visualization of Top Surface Structure and Pores of 3D Printed Ti-6Al-4V Samples Manufactured with TiC Heterogeneous Nucleation Site Particles Reviewed International journal
Yoshimi Watanabe, Masafumi Sato, Tadachika Chiba, Hisashi Sato, Naoko Sato and Shizuka Nakano
Metallurgical and Materials Transactions A 51 ( 3 ) 1345 - 1352 2020.03
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal) Publisher：Springer Nature
DOI： 10.1007/s11661-019-05597-z
Other Link： https://link.springer.com/article/10.1007%2Fs11661-019-05597-z#citeas
-
Three-Dimensional Analysis of Fragmentation Process of Al3Ti Platelet Particles in Al-Al3Ti Multiphase Alloy Deformed by Asymmetric Rolling Reviewed International journal
Hisashi Sato, Akihiro Mori, Mariko Kitagawa, Duraisamy Sarath Babu, Tadachika Chiba and Yoshimi Watanabe
JOM (The Journal of The Minerals, Metals & Materials Society) 72 ( 1 ) 57 - 64 2020.01
Language：English Publishing type：Research paper (scientific journal) Publisher：Springer Nature
-
Application of Atmospheric-Pressure Plasma Treatment to Coat Ti-Alloy Orthodontic Wire with White Oxide Layer Reviewed International journal
Naho Mitsuishi, Eri Miura-Fujiwara, Motoko Yamada, Tadachika Chiba, Hisashi Sato, Yoshimi Watanabe, Michiko Ito, Seigo Takashima, Masaaki Nakai, Toshikazu Akahori, Masaki Tanaka, Mitsuo Niinomi and Tsutomu Takeuchi
Japanese Journal of Applied Physics 59 SAAC09-1 - SAAC09-7 2019.11
Language：English Publishing type：Research paper (scientific journal) Publisher：IOP Publishing
Other Link： https://doi.org/10.7567/1347-4065/ab43a9
-
Fabrication of Al based Composites by Centrifugal Mixed-Powder Method and Their Application for Grinding Wheels Reviewed International journal
Yoshimi Watanabe, Takayasu Sugiura, Hisashi Sato and Hideaki Tsuge
Journal of Materials Engineering and Performance 68 ( 7 ) 3852 - 3863 2019.07
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal) Publisher：Springer
DOI： 10.1007/s11665-019-03917-3
Other Link： https://doi.org/10.1007/s11665-019-03917-3
-
Fragmentation Process of Platelet Al3Ti Particles in Compressed Al-Al3Ti Alloy Observed by Serial Sectioning and EBSD Analysis Reviewed International journal
Sarath Babu Duraisamy, Hisashi Sato, Tadachika Chiba and Yoshimi Watanabe
Materials Research Express 6 ( 096575 ) 1 - 8 2019.07
Language：English Publishing type：Research paper (scientific journal) Publisher：IOPscience
Other Link： https://doi.org/10.1088/2053-1591/ab2fc0
-
Effects of TiC Addition on Directionally Solidified Microstructure of Ti6Al4V Reviewed International journal
Shunya Yamamoto, Naoki Date, Yuhi Mori, Shinsuke Suzuki, Yoshimi Watanabe, Shizuka Nakano and Naoko Sato
Metallurgical and Materials Transactions A 50 ( 7 ) 3174 - 3185 2019.07
Language：English Publishing type：Research paper (scientific journal) Publisher：Springer Nature
-
Formation of Compositional Gradient in Al/SiC FGMs Fabricated under Huge Centrifugal Forces using Solid-Particle and Mixed-Powder Methods Reviewed International coauthorship International journal
Saifulnizan Jamian, Hisashi Sato and Yoshimi Watanabe
Ceramics International 45 ( 7, Part B ) 9444 - 9453 2019.05
Language：English Publishing type：Research paper (scientific journal) Publisher：Elsevier
DOI： 10.1016/j.ceramint.2018.08.315
Other Link： https://www.sciencedirect.com/science/article/pii/S0272884218323964?via%3Dihub
-
Fabrication of Grain Refiners with a High Volume Fraction of Al2.7Fe0.3Ti Heterogeneous Nucleation Site Particles by Spark Plasma Sintering Reviewed International journal
Yoshimi Watanabe, Syusuke Taniai and Hisashi Sato
Japanese Journal of Applied Physics 58 SAAC04-1 - SAAC04-9 2019.01
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal) Publisher：IOPscience
Other Link： http://iopscience.iop.org/article/10.7567/1347-4065/aaea69/meta
-
繰返し押出加工，多軸鍛造，等速圧延および異周速圧延によるAl-7%Si-1%Fe合金中の板状β-AlFeSi金属間化合物粒子の破砕 Reviewed
鍵本亮，山田素子，佐藤尚，渡辺義見，山中昇
軽金属 68 ( 12 ) 673 - 676 2018.12
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.68.673
Other Link： https://www.jstage.jst.go.jp/article/jilm/68/12/68_681204/_article/-char/ja
-
Joining of AlN and Al with Compositional Graded Layer by Centrifugal Mixed-Powder Method Reviewed International journal
Yoshimi Watanabe, Masaki Murase, Hisashi Sato and Hideaki Tsukamoto
Materials Science Forum 941 1978 - 1983 2018.12
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/MSF.941.1978
Other Link： https://www.scientific.net/MSF.941.1978
-
Three-Dimensional Microstructural Analysis of Fragmentation Behavior of Platelet Al3Ti Particles in Al-Al3Ti Composite Deformed by Equal-Channel Angular Pressing Reviewed International journal
Hisashi Sato and Yoshimi Watanabe
Materials Characterization 144 305 - 315 2018.10
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.matchar.2018.07.005
Other Link： https://doi.org/10.1016/j.matchar.2018.07.005
-
Fabrication of Ni-Aluminides Long-Fiber Reinforced Ni Matrix Composite by a Reaction at Narrow Holes Method Reviewed International journal
Yoshimi Watanabe, Shingo Gonda, Hisashi Sato, Seiji Miura
Journal of Materials Processing Technology 259 320 - 331 2018.09
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.jmatprotec.2018.02.032
Other Link： https://www.sciencedirect.com/science/article/pii/S0924013618300888
-
金属粉末の高密度充填化と積層造形技術への応用 Reviewed
渡辺義見，小寺諒，佐藤尚
Journal of Functionally Graded Materials 32 7 - 12 2018.09
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.14957/fgms.32.7
Other Link： https://doi.org/10.14957/fgms.32.7
-
Drilling CFRP Laminates by Dual-axis Grinding Wheel System with Copper/Diamond Functionally Graded Grinding Wheel Reviewed International journal
Takahiro Kunimine, Hideaki Tsuge, Daisuke Ogawa, Motoko Yamada, Hisashi Sato and Yoshimi Watanabe
Journal of Manufacturing Science and Engineering 140 ( 7 ) , 071011-1 - 071011-7 2018.07
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1115/1.4039650
Other Link： http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleID=2676043
-
Grain refinement of pure Al using Al2.5Cu0.5Ti particles with an L12 structure Reviewed International journal
Yoshimi Watanabe, Ryosuke Yamazaki, Kunika Yamanaka and Hisashi Sato
Journal of Materials Processing Technology 255 400 - 410 2018.05
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.jmatprotec.2017.11.047
Other Link： http://www.sciencedirect.com/science/article/pii/S0924013617305678
-
多軸鍛造を施したAl-Al3Ti複相材料のAl3Ti粒子分布に及ぼす鍛造温度の影響 Invited Reviewed
佐藤尚，手島史貴，渡辺義見
軽金属 68 ( 1 ) 2 - 8 2018.01
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.68.2
Other Link： https://www.jstage.jst.go.jp/article/jilm/68/1/68_680102/_article/-char/ja
-
Formation of L12 Modified Al2.5Cu0.5Ti Phase by Heat Treatment of Spark Plasma Sintered Cu/Al3Ti Specimens Reviewed International journal
Yoshimi Watanabe, Kazuaki Hirata, Hisashi Sato
Japanese Journal of Applied Physics 57 ( 1S ) 01AF04 - (8 pages) 2018.01
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.57.01AF04/pdf
-
Heterogeneous Nucleation of alpha-Al Primary Crystal on L12 Modified Al2.7Ni0.3Ti Phase Reviewed International journal
Yoshimi Watanabe, Kazunori Maekawa and Hisashi Sato
Japanese Journal of Applied Physics 57 ( 1S ) 01AF08 - (6 pages) 2018.01
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.57.01AF08
-
Effects of shot-peening and atmospheric-pressure plasma on aesthetic improvement of Ti–Nb–Ta–Zr alloy for dental applications Reviewed International journal
Eri Miura-Fujiwara, Yuu Suzuki, Michiko Ito, Motoko Yamada, Simpei Matsutake, Naritake Takahima, Hisashi Sato and Yoshimi Watanabe
Japanese Journal of Applied Physics 57 ( 1S ) 01AG05 - (8 pages) 2018.01
Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.57.01AG05
-
(Fe1-xVx)3Al異質凝固核粒子添加によるアルミニウム鋳造材の結晶粒微細化 Invited Reviewed
渡辺義見，山崎良輔，知場三周，佐藤尚
鋳造工学 90 ( 1 ) 3 - 10 2018.01
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.11279/jfes.90.3
Other Link： https://doi.org/10.11279/jfes.90.3
-
Influence of Heat Treatment on Interface Structure of Stainless Steel/Gray Iron Bimetallic Layered Castings Reviewed International coauthorship International journal
M. Ramadan, K. M. Hafez, K. S. Abdel Halim, N. Fathy, T. Chiba, H. Sato and Y. Watanabe
Applied Mechanics and Materials 873 3 - 8 2017.11
Language：English Publishing type：Research paper (scientific journal)
-
遠心焼結鋳造法にて作製した銅基ダイヤモンド傾斜機能材料のCFRP穿孔加工性能の評価 Reviewed
國峯崇裕，柘植英明，小川大介，山田素子，佐藤 尚，渡辺 義見
銅と銅合金 56 ( 1 ) 227 - 231 2017.08
Language：Japanese Publishing type：Research paper (scientific journal)
-
ガスアトマイズ法により作製した球状Al3Ti添加によるアルミニウム鋳造材の結晶粒微細化 Reviewed
渡辺義見，平子孝明，知場三周，佐藤 尚
軽金属 67 ( 6 ) 208 - 213 2017.06
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.67.208
Other Link： https://www.jstage.jst.go.jp/article/jilm/67/6/67_670601/_pdf
-
Effects of Heterogeneous Nucleation Site Particles on Formability and Microstructure of Additive Manufactured Ti-6Al-4V Samples International journal
Yoshimi Watanabe, Masafumi Sato, Tadachika Chiba, Hisashi Sato, Naoko Sato and Shizuka Nakano
Proceedings of the Biomaterials International 2017 ( 1160 ) 1 - 4 2017.04
Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)
-
Effects of Work-hardening Rate on Formation of Nanocrystallized Subsurface Layer in Cu Alloys Reviewed International journal
Hisashi Sato, Yuya Kaneko and Yoshimi Watanabe
Japanese Journal of Applied Physics 56 ( 1S ) 01AE05-1 - 01AE05-5 2017.01
Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.56.01AE05
-
Microstructure of Al-Al3Ti Functionally Graded Materials Fabricated by Centrifugal Solid-Particle Method and Centrifugal in situ Method Reviewed International journal
Yoshimi Watanabe, Qi Zhou, Hisashi Sato, Toshiyuki Fujii and Tomonari Inamura
Japanese Journal of Applied Physics 56 ( 1S ) 01AG01-1 - 01AG01-11 2017.01
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.56.01AG01
-
Decomposition of Al2.7Fe0.3Ti in Heated Al-Al2.7Fe0.3Ti Refiner Fabricated by Spark Plasma and its Refining Performance Reviewed International journal
Japanese Journal of Applied Physics 56 ( 1S ) 01AG02-1 - 01AG02-7 2017.01
Language：English Publishing type：Research paper (scientific journal)
-
Thermo-Mechanical Training of Stainless Steels to Improve Damping Capacity Reviewed International journal
Yoshimi Watanabe, Naoya Iwata and Hisashi Sato
Materials Science Forum 879 101 - 106 2017
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/MSF.879.101
Other Link： https://www.scientific.net/MSF.879.101
-
Reverse Transformation Behavior Induced by Shot-peening for SUS410S Martensitic Stainless Steel Reviewed International journal
Nagomi Tsuboi, Serika Higa, Hisashi Sato and Yoshimi Watanabe
Materials Science Forum 879 2003 - 2007 2017
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/MSF.879.2003
Other Link： https://www.scientific.net/MSF.879.2003
-
Effects of Particle Size on Fabrication of Al-TiO2 Functionally Graded Materials by Centrifugal Mixed-powder Method Reviewed International journal
Hisashi Sato, Junya Maeda, Motoko Yamada and Yoshimi Watanabe
Materials Science Forum 879 1691 - 1697 2017
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/MSF.879.1691
Other Link： https://www.scientific.net/MSF.879.1691
-
Residual Stresses in Shape Memory Alloy Fiber Reinforced Aluminium Matrix Composite Invited Reviewed International coauthorship International journal
Tang Tsz Loong, Saifulnizan Jamian, Al Emran Ismail, Nik Hisyammudin Muhd Nur and Yoshimi Watanabe
IOP Conference Series: Materials Science and Engineering 165 012002 - (9 pages) 2017
Language：English Publishing type：Research paper (international conference proceedings)
DOI： 10.1088/1757-899X/165/1/012002
Other Link： http://iopscience.iop.org/article/10.1088/1757-899X/165/1/012002/pdf
-
Improvement of Bonding Force Between Abrasive Grains and Matrix in Cu/Diamond Composite Fabricated by Centrifugal Mixed-Powder Method Reviewed International journal
3 ( 6 ) 16-00297 - (10 pages) 2016.12
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1299/mej.16-00297
-
Microstructure and Wear Property of Al-Al3Ti FGMs Fabricated by Centrifugal Solid-Particle and in-situ Methods Reviewed International journal
Yoshimi Watanabe, Qi Zhou and Hisashi Sato
Conference paper for the ISFGMs 2016 134 - 137 2016.09
Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)
-
Grain Refinement Performance of Pure Al by Unstable Nucleation Sites Reviewed
Yoshimi Watanabe and Hisashi Sato
332 - 337 2016.08
Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings) Publisher：The Japan Institute of Metals and Materials
-
Enhancement of Mechanical Property of Fe-Mn-Si-Cr Fiber/Al Matrix Smart Composite Induced by Shape Memory Effect Reviewed International journal
Yoshimi Watanabe, Akihiro Yamamura and Hisashi Sato
Materials Transactions 57 ( 5 ) 590 - 599 2016.05
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.MC201504
Other Link： https://www.jstage.jst.go.jp/article/matertrans/57/5/57_MC201504/_article
-
Nanocrystallized Layer Formed by Sliding Wear under High Stress for Pure Cu Reviewed International journal
Hisashi Sato, Ryo Tsuzuki, Yuya Kaneko and Yoshimi Watanabe
Japanese Journal of Applied Physics 55 ( 1 ) 01AE08-1 - 01AE08-9 2016.01
Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.55.01AE08
-
Aluminum Matrix Texture in Al-Al3Ti Functionally Graded Materials Analyzed by Electron Back Scattering Diffraction Reviewed International coauthorship International journal
Yoshimi Watanabe, P. D. Sequeira, Hisashi Sato, Tomonari Inamura and Hideki Hosoda
Japanese Journal of Applied Physics 55 ( 1 ) 01AG03-1 - 01AG03-7 2016.01
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.55.01AG01/meta
-
Fabrication of Novel Al-L12-Type Al2.7Fe0.3Ti Refiners by Spark Plasma Sintering and Their Refining Performance Reviewed International journal
Yoshimi Watanabe, Takayuki Hamada and Hisashi Sato
Japanese Journal of Applied Physics 55 ( 1 ) 01AG01-1 - 01AG01-10 2016.01
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.55.01AG01
-
Fabrication of nickel/steel multilayer pipe by reactive centrifugal casting method Reviewed
Masataka Setoguchi,Yasumasa OyaHisashi Sato and Yoshimi Watanabe
Transactions of the JSME (in Japanese) 81 ( 829 ) 15-00245-1 - 15-00245-9 2015.09
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.1299/transjsme.15-00245
Other Link： https://www.jstage.jst.go.jp/article/transjsme/81/829/81_15-00245/_article/-char/ja/
-
Distribution of Microstructure and Cooling Rate in Al-Al2Cu Functionally Graded Materials Fabricated by a Centrifugal Method Reviewed International journal
Yoshimi Watanabe, Yuko Hattori, Hisashi Sato
Journal of Materials Processing Technology 221 197 - 204 2015.07
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.jmatprotec.2015.01.028
Other Link： http://www.sciencedirect.com/science/article/pii/S0924013615000308
-
Temperature Dependence of Reverse Transformation Induced by Shot-peening for SUS 304 Austenitic Stainless Steel Reviewed International journal
Hisashi Sato, Ai Namba, Mayumi Okada, Yoshimi Watanabe
Materials Today: Proceedings 2S S707 - S710 2015.07
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.matpr.2015.07.380
Other Link： http://www.sciencedirect.com/science/article/pii/S2214785315006252
-
Development of FGMs Manufacturing System under Centrifugal Force Reviewed
Yasumasa Oya, Masataka Setoguchi, Yuko Hattori, Naoya Iwata, Hisashi Sato and Yoshimi Watanabe
Journal of Functionally Graded Materials 29 1 - 7 2015.03
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.14957/fgms.29.1
Other Link： https://www.jstage.jst.go.jp/article/fgms/29/0/29_1/_pdf
-
Grain Refinement of Al3Ti Dispersed Aluminum Matrix Composites by Reaction Centrifugal Mixed-Powder Method Reviewed International journal
Kazuya Yamauchi, Takahiro Kunimine, Hisashi Sato and Yoshimi Watanabe
Materials Transactions 56 ( 1 ) 99 - 107 2015.01
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.L-M2014841
Other Link： https://www.jstage.jst.go.jp/article/matertrans/56/1/56_L-M2014841/_article
-
Fabrication of Copper/Diamond Functionally Graded Materials for Grinding Wheels by Centrifugal Sintered-Casting Reviewed International journal
Takahiro Kunimine, Masafumi Shibuya, Hisashi Sato and Yoshimi Watanabe
Journal of Materials Processing Technology 217 294 - 301 2015.01
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.jmatprotec.2014.11.020
Other Link： http://www.sciencedirect.com/science/article/pii/S0924013614004440
-
マルテンサイト相を有したステンレ鋼の局部腐食性におよぼすpH の影響 Reviewed
阿部俊介，斉藤 知，野田和彦，渡辺義見
傾斜機能材料論文集 26 45 - 50 2014.09
Language：Japanese Publishing type：Research paper (scientific journal)
-
Fabrication of Grain Refined Functionally Graded Grinding Wheel Reinforced by Composite Particles and its Application for Drilling of CFRP Reviewed
Kazuya Taniguchi, Hisashi Sato, Yoshimi Watanabe, Kazumasa Kurachi, Hideaki Tsuge
Journal of Functionally Graded Materials 28 1 - 8 2014.05
Language：Japanese Publishing type：Research paper (scientific journal)
This study aims to investigate machinability of carbon fiber reinforced plastic (CFRP) by grain
refined Al based metal bond functionally graded grinding wheel (FGGW) containing diamond-composite
particles. Diamond-composite particles which consist of nano-sized diamond particles and micro-sized green
silicon carbide (GC) abrasive grains have been made by mechanofusion machine (Nobilta). The Al based
metal bond FGGW was fabricated by reaction centrifugal mixed-powder (RCMP) method using mixed-powder
of Al, Ti and diamond-composite particles. Since the formed Al3Ti phase acts as grain refiner, it is expected
that the grain structure of Al matrix in FGGW fabricated by RCMP method with Ti particles becomes more
refined than that fabricated without Ti particles. Using the fabricated FGGW, CFRP drilling tests were
conducted by gyro-driving grinding wheel system. It is found that the FGGW fabricated by RCMP method
with Ti particles have fine-grained Al matrix. It is also found that optimum additive amount of Ti on the
FGGW is 4~6 mass%. It is concluded that the FGGW fabricated by RCMP method with Ti particles has
better machinability of CFRP by gyro-driving grinding wheel system.DOI： 10.14957/fgms.28.1
Other Link： https://www.jstage.jst.go.jp/article/fgms/28/0/28_1/_article
-
Color Tone and Interfacial Microstructure of White Oxide Layer on Commercially Pure Ti and Ti-Nb-Ta-Zr Alloys Reviewed International journal
Eri Miura-Fujiwara, Keisuke Mizushima, Yoshimi Watanabe, Toshihiro Kasuga and Mitsuo Niinomi,
Japanese Journal of Applied Physics 53 ( 11 ) 11RD02-1 - 11RD02-8 2014.04
Language：English Publishing type：Research paper (scientific journal) Publisher：The Japan Society of Applied Physics
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.53.11RD02
-
Microstructural Evolution of Martensite Phase in Fe-Ni Alloy Depending on Temperature of Tensile Deformation Reviewed International journal
Takanori Sonoda, Hisashi Sato, Tomokazu Moritani and Yoshimi Watanabe
Advanced Materials Research 922 716 - 721 2014.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/AMR.922.716
Other Link： http://www.scientific.net/AMR.922.716
-
Fabrication of Self-Lubricating Cu-Based Composite Containing Graphite Particle by Centrifugal Mixed-Powder Casting Reviewed International journal
Hisashi Sato, Wei Wei, Kazuaki Oguri, Motoko Yamada and Yoshimi Watanabe
Materials Science Forum 783-786 1579 - 1589 2014.04
Language：English Publishing type：Research paper (scientific journal)
-
Grain Refinement of Al Cast by Novel Al-Al2.5Cu0.5Ti Refiner Fabricated by Cold Pressing Reviewed International journal
Kunika Yamanaka, Hisashi Sato and Yoshimi Watanabe
Materials Science Forum 783-786 276 - 281 2014.04
Language：English Publishing type：Research paper (scientific journal)
-
2軸回転機構によるCFRPの穴あけ加工におけるダイヤモンド砥粒砥石の研削性能 Reviewed
柘植英明，小川大介，坂東直行，加賀忠士，渡辺義見
砥粒加工学会誌 58 ( No. 3 ) 168 - 172 2014.03
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.11420/jsat.58.168
Other Link： https://www.jstage.jst.go.jp/article/jsat/58/3/58_168/_article/-char/ja/
-
Microstructure of Centrifugal Cast Pipes Fabricated using a or b Brass Machining Chips Reviewed
J. Japan Inst. Met. Mater. 78 ( 2 ) 61 - 67 2014.02
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal) Publisher：The Japan Institute of Metals and Materials
DOI： 10.2320/jinstmet.J2013035
Other Link： https://www.jstage.jst.go.jp/article/jinstmet/78/2/78_J2013035/_article/-char/ja/
-
Microstructure Refinement of Pure Aluminum by Inoculation with Stainless Steel Powders Reviewed
H. Tsukamoto, Y. Komiya, Y. Oshima, H. Sato, and Y. Watanabe
Applied Mechanics and Materials 421 272 - 276 2013.09
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/AMM.421.272
Other Link： https://www.scientific.net/AMM.421.272
-
Grain Refinement of As-Cast Pure Al by Cold-Rolled Al-Ti Alloy Refiner Reviewed International journal
Hisashi Sato, Kentaro Ota, Hiroo Kato, Motooa Furukawa, Miki Azuma, Yoshimi Watanabe, Zuogui Zhang and Kaneaki Tsuzaki
Materials Transactions 54 ( No. 9 ) 1554 - 1564 2013.09
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.MH201322
Other Link： https://www.jstage.jst.go.jp/article/matertrans/54/9/54_MH201322/_article
-
White-Ceramic Conversion on Ti-29Nb-13Ta-4.6Zr Surface for Dental Applications Reviewed International journal
Akiko Obata, Eri Miura-Fujiwara, Akimitsu Shimizu, Hirotaka Maeda, Masaaki Nakai, Yoshimi Watanabe, Mitsuo Niinomi and Toshihiro Kasuga
Advances in Materials Science and Engineering 2013 ( 501621 ) 1 - 9 2013.08
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1155/2013/501621
Other Link： http://www.hindawi.com/journals/amse/2013/501621/
-
Damping Capacity of Fe-17mass% Mn High Damping Alloy with Variant Controlled Microstructure Reviewed International journal
Yoshimi Watanabe, Yuusuke Suga, Hisashi Sato, Hideaki Tsukamoto and Yoichi Nishino
Materials Transactions 54 ( No. 8 ) 1288 - 1294 2013.08
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.ME201305
Other Link： https://www.jstage.jst.go.jp/article/matertrans/54/8/54_ME201305/_article
-
3-Dimensional Microstructural Evaluation of Wear-Induced Layer in Al-Al3Ti Functionally Graded Materials by Serial Sectioning Reviewed
Hisashi Sato, Yusuke Noda and Yoshimi Watanabe;
Materials Transactions 54 ( No. 8 ) 1274 - 1280 2013.08
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.ME201306
Other Link： https://www.jstage.jst.go.jp/article/matertrans/54/8/54_ME201306/_article
-
Formation Behavior of Continuous Graded Composition in Ti-ZrO2 Functionally Graded Material Fabricated by Mixed-Powder Pouring Method Reviewed International journal
Murali Jayachandran, Hideaki Tsukamoto, Hisashi Sato and Yoshimi Watanabe
Journal of Nanomaterials 2013 504631-1 - 504631-8 2013.05
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1155/2013/504631
Other Link： http://www.hindawi.com/journals/jnm/2013/504631/
-
2軸回転砥石を用いたCFRPの穴あけ加工法におけるSiC砥石の耐久性 Reviewed
柘植英明，竹腰久仁雄，山神成正，加賀忠士，坂東直行，小川大介，渡辺義見
砥粒加工学会誌 57 ( No. 5 ) 314 - 319 2013.05
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.11420/jsat.57.314
Other Link： https://www.jstage.jst.go.jp/article/jsat/57/5/57_314/_article/-char/ja/
-
Development of High Strength Brass Pipe by Centrifugal Casting Method adding Machining Chips Reviewed
85 ( No. 5 ) 273 - 279 2013.05
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.11279/jfes.85.273
Other Link： https://www.jstage.jst.go.jp/article/jfes/85/5/85_273/_article/-char/ja/
-
Grain refinement performance of aluminum cast using machining chips Reviewed
63 ( 4 ) 147 - 154 2013.04
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.63.147
Other Link： https://www.jstage.jst.go.jp/article/jilm/63/4/63_147/_article/references
-
Fabrication of Al/Diamond Particles Functionally Graded Materials by Centrifugal Sintered-Casting Method Reviewed International journal
Yoshimi Watanabe Masafumi Shibuya and Hisashi Sato
Journal of Physics: Conference Series 419 2013.04
Language：English Publishing type：Research paper (international conference proceedings)
DOI： 10.1088/1742-6596/419/1/012002
Other Link： http://iopscience.iop.org/article/10.1088/1742-6596/419/1/012002/meta
-
Formation Process of Wear-Induced Layer in Fe-33%Ni Alloy Reviewed
Hisashi Sato, Yuuki Fuseya, Takahiro Kunimine and Yoshimi Watanabe
Proceedings book of the 3rd International Symposium on Steel Science (ISSS-2012) 199 - 202 2013.03
Language：English Publishing type：Research paper (international conference proceedings)
-
Creep Analysis of Functionally Graded Material Thick-Walled Cylinder Reviewed International journal
Saifulnizan Jamian, Hisashi Sato, Hideaki Tsukamoto, and Yoshimi Watanabe
Applied Mechanics and Materials 315 867 - 871 2013.03
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/AMM.315.867
Other Link： http://www.scientific.net/AMM.315.867
-
Microstructure and Mechanical Properties of ZrO2/Ti Functionally Graded Materials Fabricated by Spark Plasma Sintering
Hideaki Tsukamoto, Yoshiki Komiya, Hisashi Sato and Yoshimi Watanabe
Proceedings of the 2012 Powder Metallurgy World Congress & Exhibition 17B ( S3_2 ) 1 - 6 2013.02
Language：English Publishing type：Research paper (international conference proceedings)
-
Heterogeneous Nucleation of Pure Magnesium on Al3Ti, TiC, TiB2 and AlB2 Particles Reviewed International journal
Yoshimi Watanabe, Yan Bing Gao, Jun Qing Guo, Hisashi Sato, Seiji Miura and Hiromi Miura
Jpn J. Appl. Phys 52 ( 1 ) 2013.01
Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.7567/JJAP.52.01AN04/meta
-
Mechanical Behavior of Deep-Drawn Cups with Aluminum/Duralumin Multi-Layered Clad Structures Reviewed International journal
Hideaki Tsukamoto, Yoshiki Komiya, Hisashi Sato, and Yoshimi Watanabe
World Academy of Science, Engineering and Technology 72 108 - 112 2012.12
Language：English Publishing type：Research paper (scientific journal)
-
Oxidation Behavior and Effect of Layer Thickness on Whiteness and Exfoliation Behavior of Oxide Film Formed on Ti-Nb-Ta-Zr Alloy Reviewed International journal
E. Miura-Fujiwara, S. Yamada, A. Obata, H. Sato, Y. Watanabe, T. Kasuga and M. Niinomi
Proceedings of Ti-2011 conference 3 2116 - 2120 2012.10
Language：English Publishing type：Research paper (international conference proceedings)
-
2軸回転砥石を用いたCFRPの新規穴あけ加工法の提案 Reviewed
柘植英明，竹腰久仁雄，山神成正，加賀忠士，坂東直行，鎌倉光利，渡辺義見
砥粒加工学会誌 56 ( 9 ) 612 - 617 2012.09
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.11420/jsat.56.612
Other Link： https://www.jstage.jst.go.jp/article/jsat/56/9/56_612/_article/-char/ja/
-
Microstructure and Mechanical Properties of Ti-ZrO2 Composites Fabricated by Spark Plasma Sintering Reviewed International journal
Hideaki Tsukamoto, Takahiro Kunimine, Motoko Yamada, Hisashi Sato and Yoshimi Watanabe;
Key Engineering Materials 520 269 - 275 2012.08
Language：English Publishing type：Research paper (scientific journal)
-
Investigation of Wear Anisotropy in Severely Plastically Deformed Al-Al3Ti Composites Reviewed International journal
Shimaa Hassan El-Hadad, Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe;
Metall. Mater. Trans. A 43 ( 9 ) 3249 - 3256 2012.07
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/s11661-012-1127-3
Other Link： http://link.springer.com/article/10.1007/s11661-012-1127-3
-
Fabrication of Aluminum Alloy-Based Diamond Grinding Wheel by the Centrifugal Mixed-Powder Method for Novel Machining Technology of CFRP Reviewed
Takahiro Kunimine, Motoko Yamada, Hisashi Sato and Yoshimi Watanabe
Proceedings of 13th International Conference on Aluminum Alloys (ICAA13) 189 - 194 2012.06
Language：English Publishing type：Research paper (international conference proceedings)
DOI： 10.1002/9781118495292.ch29
Other Link： http://onlinelibrary.wiley.com/doi/10.1002/9781118495292.ch29/summary
-
3-Dimensional Microstructure of Al-Al3Ti Alloy Severely Deformed by ECAP Reviewed
H. Sato, T. Hishikawa, Y. Makino, T. Kunimine and Y. Watanabe
Proceedings of 13th International Conference on Aluminum Alloys (ICAA13) 1575 - 1580 2012.06
Language：English Publishing type：Research paper (international conference proceedings)
DOI： 10.1002/9781118495292.ch236
Other Link： http://onlinelibrary.wiley.com/doi/10.1002/9781118495292.ch236/summary
-
仮焼結を利用した遠心力混合粉末法による金属基ダイヤモンド傾斜機能砥石の創製 Reviewed
澁谷将史，佐藤尚，三浦永理，渡辺義見;
傾斜機能材料論文集 25 1 - 6 2012.05
Language：Japanese Publishing type：Research paper (scientific journal)
-
応力誘起変態を用いた傾斜機能熱遮蔽コーティングの高靭化 -微視力学モデル- Reviewed
塚本英明，佐藤尚，渡辺義見;
傾斜機能材料論文集 25 81 - 86 2012.05
Language：Japanese Publishing type：Research paper (scientific journal)
-
遠心力を用いた傾斜機能材料製造装置の開発 Reviewed
大矢泰正，瀬戸口正嵩，佐藤尚，渡辺義見;
傾斜機能材料論文集 25 68 - 74 2012.05
Language：Japanese Publishing type：Research paper (scientific journal)
-
塩化物水溶液中におけるステンレス鋼基傾斜機能材料の局部腐食性 Reviewed
阿部俊介，斉藤 知，野田和彦，渡辺義見;
傾斜機能材料論文集 25 40 - 44 2012.05
Language：Japanese Publishing type：Research paper (scientific journal)
-
表面の電位分布測定を用いた不均一表面の大気腐食性評価 Reviewed
廣畑洋平，中島佑樹，野田和彦，渡辺義見;
傾斜機能材料論文集 25 36 - 39 2012.05
Language：Japanese Publishing type：Research paper (scientific journal)
-
Analysis of FGM Crash-box using Finite Element Method Reviewed
Saifulnizan Jamian，Hisashi Sato，Hideaki Tsukamoto and Yoshimi Watanabe;
傾斜機能材料論文集 25 13 - 18 2012.05
Language：English Publishing type：Research paper (scientific journal)
-
反応遠心力混合粉末法を利用したマグネシウム基傾斜機能材料の製造 Reviewed
渡辺義見，澁谷将史，佐藤尚，三浦永理，川森重弘;
軽金属 62 ( 4 ) 153 - 159 2012.04
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.62.153
Other Link： https://www.jstage.jst.go.jp/article/jilm/62/4/62_153/_article/references/-char/ja/
-
Formation Behavior of Wear-Induced Layer in Fe-Ni Alloys Reviewed
Hisashi Sato, Yuichi Kubota, Eri Miura-Fujiwara and Yoshimi Watanabe;
Trans. MRSJ 37 ( 1 ) 31 - 34 2012.03
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.14723/tmrsj.37.31
Other Link： https://www.jstage.jst.go.jp/article/tmrsj/37/1/37_31/_article/-char/en
-
Fabrication of TiO2 Coated Cotton-Yarn as High-Dielectric-Constant Fiber for 3-D Photonic Crystal Application Reviewed
Motoo Furukawa, Hisahi Sato and Yoshimi Watanabe;
Trans. MRSJ 37 ( 1 ) 35 - 38 2012.03
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.14723/tmrsj.37.35
Other Link： https://www.jstage.jst.go.jp/article/tmrsj/37/1/37_35/_article/-char/en
-
Effects of Dispersoids on Wear Behavior of Cu-based Composite Containing SiO2 Particles Reviewed
Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe
Jpn J. Appl. Phys 51 01AK01-1 - 01AK01-6 2012.01
Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.1143/JJAP.51.01AK01/meta
-
Experimental Study on Severe Plastic Deformation of Ti by Novel Equal-Channel Angular Pressing Reviewed
Saifulnizan Jamian, Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe
Jpn J. Appl. Phys 51 01AK04-1 - 01AK04-7 2012.01
Language：English Publishing type：Research paper (scientific journal)
Other Link： http://iopscience.iop.org/article/10.1143/JJAP.51.01AK04/meta
-
Design of ZrO2/Ti Functionally Graded Thermal Barreir Coatings basesd on a Nonlinear Micromechanical Approarch Reviewed
Hideaki Tsukamoto, Hisashi Sato and Yoshimi Watanabe
Applied Mechanics and Materials 152-154 167 - 170 2012.01
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.4028/www.scientific.net/AMM.152-154.167
Other Link： https://www.scientific.net/AMM.152-154.167
-
Mechanical Spectroscopic Study of Equal-Channel Angular Pressed Al-Ni Eutectic Alloy Reviewed
Yoshimi Watanabe, Zuogui Zhang, Hisashi Sato, Tomonari Inamura, Hideki Hosoda
Solid State Phenomena 184 173 - 178 2012.01
Language：English Publishing type：Research paper (scientific journal)
-
Influence of Processing Regimes on Fine-Grained Microstructure Development in an Al-Mg-Sc Alloy by Hot Equal-Channel Angular Pressing Reviewed
Oleg Sitdikov, Elena Avtokratova, Rita Babicheva, Taku Sakai, Kaneaki Tsuzaki and Yoshimi Watanabe
Materials Transactions 53 ( 1 ) 56 - 62 2011.12
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.MD201108
Other Link： https://www.jstage.jst.go.jp/article/matertrans/advpub/0/advpub_MD201108/_article/-char/ja
-
Training Effects on Damping Capacity in Mn-22.5mass%Cu-5mass%Ni-2mass%Fe Alloy Reviewed
Yoshimi Watanabe, Yuusuke Suga, Eri Miura-Fujiwara, Hisashi Sato and Yoichi Nishino
Materials Science Forum 706-709 2026 - 2031 2011.11
Language：English Publishing type：Research paper (scientific journal)
-
Phase Transformation in Fe Alloys Induced by Surface Treatments Reviewed
Hisashi Sato, T. Nishiura, Eri Miura-Fujiwara and Yoshimi Watanabe
Materials Science Forum 706-709 1996 - 2001 2011.11
Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Metal-based Functionally Graded Grinding Wheel by a Centrifugal Mixed-Powder Method Reviewed
Eri Miura-Fujiwara, Hisashi Sato, Motoko Yamada, Yoshimi Watanabe
Materials Science Forum 706-709 661 - 666 2011.11
Language：English Publishing type：Research paper (scientific journal)
-
Microstructures and Mechanical Properties of Titanium / Biodegradable-polymer FGM for Bone Tissue Fabricated by Spark Plasma Sintering Method Reviewed International journal
Yoshimi Watanabe, Yoshimi Iwasa, Hisashi Sato, Akira Teramoto Koji Abe and Eri Miura-Fujiwara
Journal of Materials Processing Technology 211 ( 12 ) 1919 - 1926 2011.09
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
-
Corrosion Behaviour of Al/Al3Ti and Al/Al3Zr Functionally Graded Materials Produced by Centrifugal Solid-particle Method: Influence of the Intermetallics Volume Fraction Reviewed International coauthorship International journal
S.C. Ferreira, L.A. Rocha, E. Ariza, P.D. Sequeira and Y. Watanabe
Corrosion Science 53 ( 6 ) 2058 - 2065 2011.06
Language：English Publishing type：Research paper (scientific journal)
-
切削屑を利用した遠心鋳造法のアルミニウムでの検証 Reviewed
渡辺義見，田伏賢一，佐藤尚，伊藤智啓，大矢泰正
日本金属学会誌 75 ( 5 ) 320 - 326 2011.05
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)
-
Microstructural Characterization and Tribocorrosion Behaviour of Al/Al3Ti and Al/Al3Zr FGMs Reviewed International coauthorship International journal
S.C. Ferreira, P.D. Sequeira, Y. Watanabe, L.A. Rocha, E. Ariza and J. R. Gomes
Wear 270 ( 11-12 ) 806 - 814 2011.05
Language：English Publishing type：Research paper (scientific journal)
-
Mechanical Properties, Morphologies, and Microstructures of Novel Electrospun Metallized Nanofibers Reviewed International journal
Hae-Rim Kim, Takeru Ito, Byoung-Suhk Kim, Yoshimi Watanabe and Ick-Soo Kim
Advanced Engineering Materials 13 ( 5 ) 376 - 382 2011.05
Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Al/Al4Ti Functionally Graded Materials by Reaction Centrifugal Mixed-Powder Method Reviewed
Shimaa El-Hadad, Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe
Japanese Journal of Applied Physics 50 ( 1 ) 01AJ02-1 - 01AJ02-7 2011.01
Language：English Publishing type：Research paper (scientific journal)
-
Finite Element Analysis of Severe Plastic Deformation of Difficult-to-work Material by Equal-Channel Angular Pressing at Ambient Temperature Reviewed
Saifulnizan Jamian, Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe
Japanese Journal of Applied Physics 50 ( 1 ) 01AJ06-1 - 01AJ06-5 2011.01
Language：English Publishing type：Research paper (scientific journal)
-
Cold Model for Process of a Ni-aluminides/Steel Clad Pipe by a Reactive Centrifugal Casting Method Reviewed
Yoshimi Watanabe, Yoshifumi Inaguma and Hisashi Sato
Materials Letters 65 ( 3 ) 467 - 470 2011.01
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Functionally Graded Grinding Wheel by a Centrifugal Mixed-Powder Method for CFRP-Drilling Applications Reviewed
Yoshimi Watanabe, Eri Miura-Fujiwara, Hisashi Sato, Kunio Takekoshi, Hideaki Tsuge, Tadashi Kaga, Naoyuki Bando, Shigemasa Yamagami, Kazumasa Kurachi and Hisanori Yokoyamae
International Journal of Materials and Product Technology 42 ( 1-2 ) 29 - 45 2011
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1504/IJMPT.2011.044912
Other Link： https://www.inderscienceonline.com/doi/abs/10.1504/IJMPT.2011.044912
-
マルテンサイト変態法によって製造した傾斜機能材料の耐食性評価 Reviewed
加藤将洋，野田和彦，香川勇樹，金子 弘，田辺知博，渡辺義見
傾斜機能材料論文集 24 112 - 117 2010.12
Language：Japanese Publishing type：Research paper (scientific journal)
-
ジャイロ式砥石研削機構によるCFRPの新規穴あけ加工法の提案 Reviewed
柘植英明，竹腰久仁雄，山神成正，加賀忠士，坂東直行，鎌倉光利，渡辺義見
傾斜機能材料論文集 24 106 - 111 2010.12
Language：Japanese Publishing type：Research paper (scientific journal)
-
遠心力法により創製したAl-Al3Ni傾斜機能材料の水溶液腐食挙動 Reviewed
野田和彦，若沢勝博，古澤利典，鈴木良治，渡辺義見
傾斜機能材料論文集 24 100 - 105 2010.12
Language：Japanese Publishing type：Research paper (scientific journal)
-
Al-Al2Cu共晶組織のラメラ間隔を利用した遠心力法製造時における冷却速度分布の推算 Reviewed
服部祐幸，佐藤尚，三浦永理，渡辺義見
傾斜機能材料論文集 24 17 - 22 2010.12
Language：Japanese Publishing type：Research paper (scientific journal)
-
遠心力混合粉末法によるMg-Si系傾斜機能材料の創製 Reviewed
澁谷将史，佐藤 尚，三浦永理，渡辺義見，川森重弘
傾斜機能材料論文集 24 11 - 16 2010.12
Language：Japanese Publishing type：Research paper (scientific journal)
-
遠心力混合粉末法によるCFRP加工用Cu-ナノダイヤモンド系傾斜機能砥石の作製 Reviewed
間宮佑太，佐藤尚，三浦永理，渡辺義見，倉知一正，横山久範
傾斜機能材料論文集 24 5 - 10 2010.12
Language：Japanese Publishing type：Research paper (scientific journal)
-
表面の電位分布測定を用いた不均一表面の反応性評価 Reviewed
廣畑洋平，横田歩，野田和彦，片山英樹，升田博之，渡辺義見
傾斜機能材料論文集 24 1 - 4 2010.12
Language：Japanese Publishing type：Research paper (scientific journal)
-
Wear of Al/Al3Zr Functionally Graded Materials Fabricated by Centrifugal Solid-Particle Method Reviewed
Shimaa El-Hadad, Hisashi Sato and Yoshimi Watanabe
Journal of Materials Processing Technology 210 ( 15 ) 2245 - 2251 2010.11
Language：English Publishing type：Research paper (scientific journal)
-
Flexible Photonic Crystal via Alumina Ball Inserted Teflon Tube Invited Reviewed
Yoshimi Watanabe, Takehiro Hotta and Hisashi Sato
Applied Physics A 100 ( 4 ) 981 - 985 2010.08
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/s00339-010-5906-7
Other Link： http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s00339-010-5906-7.
-
Morphologies and Tensile Strength of Metallized Hybrid Nanofibers
H.-R. Kim, H.-S. Bang, B.-S. Kim, Y. Watanabe, Y. Enomoto and I.-S. Kim
Proceedings of NSTI-Nanotech 2010 2 149 - 152 2010.06
Language：English Publishing type：Research paper (international conference proceedings)
-
Microstructure and Mechanical Properties of Wear-Induced Layer in Fe-Ni alloys
Hisashi Sato, Yuichi Kubota, Eri Miura-Fujiwara and Yoshimi Watanabe
Proceedings of the 2nd International Symposium on Steel Science (ISSS 2009) 249 - 252 2010.06
Language：English Publishing type：Research paper (international conference proceedings)
-
Anisotropic Mechanical Properties of ECAPed Al-5%Zr Containing Platelet Particles Reviewed
Shimaa El-Hadad, Hisashi Sato and Yoshimi Watanabe
Materials Science and Engineering: A 527 ( 18-19 ) 4674 - 4679 2010.05
Language：English Publishing type：Research paper (scientific journal)
-
Mechanical Properties of Metallized Single Nanofibers Reviewed
Hae-Rim Kim, Naotaka Kimura, Hyun-Sik Bang, Byoung-Suhk Kim, Yoshimi Watanabe and Ick-Soo Kim
Materials Science Forum 654-656 2463 - 2466 2010.05
Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Ti-based Biodegradable Material Composites Prepared by Spark Plasma Sintering Method Reviewed
Eri Miura-Fujiwara, Takeshi Teramoto, Hisashi Sato, Equo Kobayashi, Yoshimi Watanabe
Materials Science Forum 654-656 2158 - 2161 2010.05
Language：English Publishing type：Research paper (scientific journal)
-
Grain Refinement Performance of Al Cast using Machining Chips Reviewed
Yoshimi Watanabe, Kenichi Tabushi, Hisashi Sato, Eri Miura-Fujiwara
Materials Science Forum 654-656 1444 - 1447 2010.05
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
-
Effects of phase transformation temperature on formation of wear-induced layer in Fe-Ni alloys Reviewed
Hisashi Sato, Yuichi Kubota, Eri Fujiwara and Yoshimi Watanabe
Materials Science Forum 654-656 1227 - 1230 2010.05
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
-
Training Effects on Damping Capacity in Fe-Mn and Fe-Mn-Cr Alloy Reviewed International journal
Yoshimi Watanabe, Hisashi Sato, Yoichi Nishino and Ick-Soo Kim
Materials Science Forum 638-642 2201 - 2206 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Investigation of the Mechanical Properties in Al/Al3Zr FGMs Fabricated by Centrifugal Casting Method Reviewed International journal
Materials Science Forum 631-632 379 - 384 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Titanium / Biodegradable-polymer FGM for Medical Application Reviewed International journal
Yoshimi Watanabe, Yoshimi Iwasa, Hisashi Sato, Akira Teramoto and Koji Abe
Materials Science Forum 631-632 199 - 204 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Metallized Electrospun Copper Nanofiber Webs Reviewed International journal
Ick Soo Kim, Kai Wei, Tomohiro Ohta, Byoung-Suhk Kim and Yoshimi Watanabe
Materials Science Forum 638-642 1719 - 1724 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Cu-based Functionally Graded Materials Dispersing Fine SiC Particles by a Centrifugal Mixed-Powder Method Reviewed International journal
Hisashi Sato, Yoshifumi Inaguma, Yoshimi Watanabe
Materials Science Forum 638-642 2160 - 2165 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Al-based FGM Containing TiO2 Nano-Particles by a Centrifugal Mixed-Powder Method Reviewed International journal
Materials Science Forum 631-632 441 - 447 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Effects of the Processing Temperature of Centrifugal Casting on the Mechanical Properties of Al-Al3Ti FGMs Reviewed International journal
Shimaa Hassan El-Hadad, Hisashi Sato, Paulo David Sequeira, Yoshimi Watanabe and Yoshihiro Oya-Seimiya
Materials Science Forum 631-632 373 - 378 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Effect of Casting Condition on Density and Hardness Gradients of Al-Al2Cu Alloy FGM Fabricated by Centrifugal in-situ Method Reviewed International journal
Ken-ichi Tabushi, Hisashi Sato and Yoshimi Watanabe
Materials Science Forum 631-632 449 - 454 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Development of Compositional Gradient Simulation for Centrifugal Slurry-Pouring Methods Reviewed International journal
Keisuke Kinoshita, Hisashi Sato and Yoshimi Watanabe
Materials Science Forum 631-632 455 - 460 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
FEM Modeling of Severe Plastic Deformation of Ti Embedded in FGM Matrix Composite Reviewed
Saifulnizan Jamian, Yoshimi Watanabe, Hisashi Sato and Eri Miura-Fujiwara
19 - 24 2010.04
Language：English Publishing type：Research paper (scientific journal)
-
Transport Phenomena of Circular Particles and Fibers in Axially Rotating Drum Reviewed
S. Torii, S. Tanaka and Y. Watanabe
Int. J. Nanoelectronics and Materials 3 71 - 79 2010.02
Language：English Publishing type：Research paper (scientific journal)
-
Novel Fabrication Method of FGM Containing Nano-Particles - Centrifugal Mixed-Powder Method - Reviewed International journal
Yoshimi Watanabe and Hisashi Sato
Key Engineering Materials 434-435 751 - 756 2010.02
Language：English Publishing type：Research paper (scientific journal)
-
Evaluation of Particle Size and Shape Distributions in Al-Al3Ni in-situ Functionally Graded Materials Fabricated by a Semi-solid Forming Reviewed International journal
Koichi Matsuda, Yoshimi Watanabe, Hisashi Sato, Ick-soo Kim and Yasuyoshi Fukui
International Journal of Materials and Product Technology 39 ( 1-2 ) 108 - 121 2010.01
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1504/IJMPT.2010.034264
Other Link： http://www.inderscience.com/info/inarticle.php?artid=34264
-
Fabrication of Active Smart Composites by a Centrifugal Mixed-Powder Method
Yoshimi Watanabe, Saifulnizan Jamian, Eri Miura-Fujiwara and Hisashi Sato
Proc. of 11th Japan International SAMPE Symposium & Exhibition (JISSE-11) ( SMS4-1 ) 1 - 5 2009.11
Publishing type：Research paper (international conference proceedings)
-
In-situ Observation of Butterfly-type Martensite in Fe-30wt.%Ni Alloy during Tensile Test using High-Resolution EBSD Reviewed International coauthorship
Hisashi Sato, Stefan Zaefferer and Yoshimi Watanabe
ISIJ International 49 ( 11 ) 1784 - 1791 2009.11
Language：English Publishing type：Research paper (scientific journal)
-
Effects of e Martensite and Dislocation Behavior by Thermomechanical Treatment in Fe-Cr Damping Alloy Reviewed International journal
Yuhei Nishimura, Gwang-Ho Kim, Yoshimi Watanabe, Hisashi Sato, Yoichi Nishino, Hae-Ryong Jung, Chang-Yong Kang and Ick-Soo Kim
Materials Science and Engineering: A 521-522 368 - 371 2009.09
Language：English Publishing type：Research paper (scientific journal)
-
Flexible Photonic Crystal via Alumina Ball Inserted Teflon Tube
Yoshimi Watanabe, Takehiro Hotta and Hisashi Sato
Proceedings of the 10th Asian Textile Conference (ATC-10) ( G1-P-36 ) 1 - 6 2009.09
Publishing type：Research paper (international conference proceedings)
-
Effects of Training Temperature on Damping Capacity in Thermally Cycled Fe-20mass%Mn Alloy Reviewed International journal
Yoshimi Watanabe, Hisashi Sato, Yoichi Nishino and Ick-Soo Kim
Materials Science and Engineering: A 521-522 376 - 379 2009.09
Language：English Publishing type：Research paper (scientific journal)
-
Cu-Ni-Si及びCu-Ni-Be系合金の機械的性質 Reviewed
下平圭太，渡邊千尋，門前亮一，佐藤尚，渡辺義見
銅と銅合金 48 ( 1 ) 135 - 139 2009.08
Publishing type：Research paper (scientific journal)
-
Nickel-Aluminides Long-Fiber Reinforced Nickel Matrix Composite fabricated by a Reaction at Narrow Holes Method
Y. Watanabe, H. Sato and S. Miura
Proceedings of 17th International Conference on Composite Materials (ICCM-17, Edinburgh), Published by IOM Communications Ltd ( D8.3 ) 1 - 10 2009.07
Publishing type：Research paper (international conference proceedings)
-
Development of New Composite Materials for Orthopaedic Internal Fixation Consisting of Porous Titanium Alloys and Biode-gradable Calcium Phosphates
E. Kobayashi, Y. Watanabe, T. Kikuchi and T. Sato
Procedings of Processing and Fabrication of Advanced Materials XVIII 1215 - 1220 2009.04
Publishing type：Research paper (international conference proceedings)
-
Novel Method to Evaluate the Net Wear Volume of Bag-filter by Ash Dust Reviewed International journal
Yoshimi Watanabe, Hisashi Sato, Yu Hirai, Ick-soo Kim, Shigeru Hinata and Jooyong Kim
Journal of Hazardous Materials 161 ( 2-3 ) 775 - 780 2009.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.jhazmat.2008.04.024
Other Link： http://www.sciencedirect.com/science/article/pii/S0304389408005475
-
Behavior of Submicrocrystalline Aluminum Alloy 1570 under Cyclic Loading Conditions Reviewed International journal
E. Avtokratova, R. Kaibyshev, O. Sitdikov and Y. Watanabe
The Physics of Metals and Metallography 107 ( 3 ) 291 - 297 2009.03
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1134/S0031918X09030119
Other Link： http://link.springer.com/article/10.1134/S0031918X09030119
-
Effects of Severe Plastic Deformation on the Corrosion Behavior of Aluminum Alloys Reviewed International journal
Eiji Akiyama, Zuogui Zhang, Yoshimi Watanabe and Kaneaki Tsuzaki
Journal of Solid State Electrochemistry 13 ( 2 ) 277 - 282 2009.02
Language：English Publishing type：Research paper (scientific journal)
-
PVAc/FeSO4 複合体ナノ繊維製造に関する研究 Reviewed
李根炯，大澤道，李スミン，朴鐘喆，金翼水，金管雨，金学龍，渡辺義見
繊維学会誌 64 ( 10 ) 306 - 31 2008.10
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2115/fiber.64.306
-
Formation of Wear-Induced Layer with Nanocrystalline Structure in Al-Al3Ti Functionally Graded Material Reviewed
Hisashi Sato, Takashi Murase, Toshiuki Fujii, Susumu Onaka, Yoshimi Watanabe and Masaharu Kato
Acta Materialia 56 ( 17 ) 4549 - 4558 2008.10
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.actamat.2008.05.012
Other Link： http://www.sciencedirect.com/science/article/pii/S1359645408003790
-
生体用Ti-PLLA系傾斜機能材料の開発 Reviewed
岩沙好実，渡辺義見，佐藤 尚，寺本 彰，阿部康次
傾斜機能材料論文集 21 61 - 66 2008.07
Publishing type：Research paper (scientific journal)
-
半溶融加工を行ったAl-Al3Ni傾斜機能材料の摩耗特性 Reviewed
福井泰好, 岡田裕, 熊澤典良, 渡辺義見
日本金属学会誌 72 ( 7 ) 496 - 502 2008.07
Language：Japanese Publishing type：Research paper (scientific journal)
-
Development of SiC Particle-dispersed Mg-based Functionally Graded Materials by a Centrifugal Solid-particle Method Reviewed
Yoshimi Watanabe, Hisashi Sato, Katsuya Mori, Su-Min Lee, Ick-Soo Kim, Hiromi Miromi and Seiji Miura
Proceedings of the US-Japan Conference on Composite Materials 2008 (HTC - 5) 2008.06
Publishing type：Research paper (international conference proceedings)
-
Fatigue-Crack-Growth Behavior of Ultrafine-Grained Al-Mg-Sc Alloy Processed by ECAP Reviewed International coauthorship International journal
Elena Avtokratova, Oleg Sitdikov, Rustam Kaibyshev, Yoshimi Watanabe
Materials Science Forum 584-586 821 - 826 2008.04
Language：English Publishing type：Research paper (scientific journal)
-
Effects of Processing Routes on Wear Property of Al-Al3Ti alloys Severely Deformed by ECAP Reviewed International journal
Hisashi Sato, Shimaa Elhadad, Oleg Sitdikov and Yoshimi Watanabe
Materials Science Forum 584-586 971 - 976 2008.04
Language：English Publishing type：Research paper (scientific journal)
-
Effect of Processing Temperature on Microstructure Development during ECAP of Al-Mg-Sc Alloy Reviewed International coauthorship International journal
leg Sitdikov, Elena Avtokratova, Taku Sakai, Kaneaki Tsuzaki, Rustam Kaibyshev, Yoshimi Watanabe
Materials Science Forum 584-586 481 - 486 2008.04
Language：English Publishing type：Research paper (scientific journal)
-
Training Effect on Damping Capacity in Fe-20mass%Mn Binary Alloy Reviewed International journal
Yoshimi Watanabe, Hisashi Sato, Yoichi Nishino and Ick Soo Kim
Materials Science and Engineering: A 490 ( 1-2 ) 138 - 145 2008.04
Language：English Publishing type：Research paper (scientific journal)
-
Corrosion Behavior of Al-Al3Ni and Al-Al2Cu FGMs Fabricated by a Centrifugal Method Reviewed
Kazuhiko Noda, Keita Miyahara, Yoshimi Watanabe
Multiscale and Functionally Graded Materials, Proceedings of the International Conference FGM IX 574 - 578 2008.03
Publishing type：Research paper (international conference proceedings)
-
Evaluation Methods of Wear Properties of Bag Filter using an Optical Fiber and Magnetic Particles Reviewed
64 ( 3 ) 79 - 84 2008.03
Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2115/fiber.64.79
Other Link： https://www.jstage.jst.go.jp/article/fiber/64/3/64_3_79/_article/-char/ja/
-
Experimental and Theoretical Study on Circular Disk Particles Suspended in Centrifugal and Non-Centrifugal Force Environment Reviewed
Shuichi Torii, Yoshimi Watanabe, Satoyuki Tanaka, Toshiaki Yano and Naoko Iino
Multiscale and Functionally Graded Materials, Proceedings of the International Conference FGM IX 579 - 585 2008.03
Publishing type：Research paper (international conference proceedings)
-
Corrosion Resistance Evaluation of a Functionally Graded Material Using an Electrochemical Sensor Reviewed
T. Saitoh, K. Kakefuda, K. Noda, and Y. Watanabe
Multiscale and Functionally Graded Materials, Proceedings of the International Conference FGM IX 965 - 970 2008.03
Publishing type：Research paper (international conference proceedings)
-
Microstructure Behavior of Al-Mg-Sc Alloy Processed by ECAP at Elevated Temperature Reviewed International coauthorship International journal
O. Sitdikov, T. Sakai, E. Avtokratova, R. Kaibyshev, K. Tsuzaki and Y. Watanabe
Acta Materialia 56 ( 4 ) 821 - 834 2008.02
Language：English Publishing type：Research paper (scientific journal)
-
多層確率モデルを用いた電界放糸不織布の孔径分析 Reviewed
金 周瑢，渡辺義見，李スミン，Park Jong Chul, 金 翼水
繊維学会誌 64 ( 1 ) 20 - 23 2008.01
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2115/fiber.64.20
-
Fe-Mn-Si-Cr Shape Memory Alloy Reinforced Smart Composite
Yoshimi Watanabe
Proc. of 10th Japan International SAMPE Symposium & Exhibition (JISSE-10) ( SM34 ) 1 - 6 2007.11
Publishing type：Research paper (international conference proceedings)
-
Wear Property of Al-Al3Ni FGMs Fabricated by Centrifugal in-situ Method
Taishi Takenaka, Hisashi Sato, Yoshimi Watanabe
Proc. of 10th Japan International SAMPE Symposium & Exhibition (JISSE-10) ( SM52 ) 1 - 6 2007.11
Publishing type：Research paper (international conference proceedings)
-
Microstructure and Mechanical Properties of Ni-Al Fiber Reinforced Composite Fabricated by the Reaction at Narrow Holes Method
Shingo Gonda, Hisashi Sato, Yoshimi Watanabe,Yasuhiko Tanaka and Masanori Kajiwara
Proc. of 10th Japan International SAMPE Symposium & Exhibition (JISSE-10) ( SM72 ) 1 - 6 2007.11
Publishing type：Research paper (international conference proceedings)
-
Mechanical Properties and Microstructure of Porous Titanium for Bone Tissue Fabricated by SPS Method
Yoshimi Iwasa, Hisashi Sato and Yoshimi Watanabe
Proc. of 10th Japan International SAMPE Symposium & Exhibition (JISSE-10) ( PS18 ) 1 - 6 2007.11
Publishing type：Research paper (international conference proceedings)
-
Health Monitoring of Bag Filter using an Optical Fiber
Satoshi Kishi, Hisashi Sato, Yoshimi Watanabe, Ko Mibu, Satoshi Shimakawa and Shigeru Hinata
Proc. of 10th Japan International SAMPE Symposium & Exhibition (JISSE-10) ( SM42 ) 1 - 6 2007.11
Publishing type：Research paper (international conference proceedings)
-
バグフィルタを通過する混相流動の可視化とバグフィルタ摩耗機構に関する研究 Reviewed
島川聡，日向滋，鮑力民，渡辺義見，清水秀彦，木嶋敬昌，向井俊哉
混相流 21 ( 3 ) 288 - 296 2007.04
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.3811/jjmf.21.288
-
Microstructural Evalution in a Commercial Al-Mg-Sc Alloy During ECAP at 300C Reviewed International coauthorship International journal
O. Sitdikov, T. Sakai, E. Avtokratova, R. Kaibyshev, K. Tsuzaki, Y. Watanabe
Materials Science Forum 558-559 569 - 574 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Mechanical Properties of Al-5.7wt% Ni Eutectic Alloy Severely Deformed by Equal-Channel Angular Pressing Reviewed International journal
Yoshimi Watanabe, Z. G. Zhang, Hisashi Sato, Tomonari Inamura and Hideki Hosoda
Materials Science Forum 539-543 2916 - 2921 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Mechanical and Physical Properties of Ni3Al-based Alloy with Cr Carbides Dispersion Reviewed International journal
S. Miura, H. Goldenstein, K. Ohkubo, H. Sato, Y. Watanabe and T. Mohri
Materials Science Forum 561-565 439 - 442 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Growth Behavior of Compound Layers During Reactive Diffusion Between Solid Cu and Liquid Al Reviewed International journal
Y. Tanaka, M. Kajihara and Y. Watanabe
Materials Science and Engineering: A 445-446 355 - 363 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Effects of SiO2 Particles on Wear Behavior of Cu-SiO2 Dispersion-Hardened Alloys Reviewed International journal
Hisashi Sato and Yoshimi Watanabe
Materials Science Forum 561-565 659 - 662 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Effects of Co and εMartensite on the Damping Capacity of High Strength Fe-Cr-Mn-Co Alloys Reviewed
Ick-Soo Kim, Yuhei Nishimura, Su Min Lee, Yoshimi Watanabe, JooYong Kim, Hae Ryong Jung, Chang-Yong Kang and Kazuya Miyahara
J. of the Korean Institute of Metals and Materials 45 ( 7 ) 403 - 408 2007.04
Publishing type：Research paper (scientific journal)
-
Effect of Processing Route on Microstructure and Texture Development in ECAP of Al-Ti Alloy Reviewed International coauthorship International journal
Yoshimi Watanabe, P. D. Sequeira, O. Sitdikov, Hisashi Sato, Zuogui Zhang and Ick-Soo Kim
Materials Science Forum 561-565 251 - 254 2007.04
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
-
Density and Hardness Gradients of Functionally Graded Material Ring Fabricated from Al-3mass %Cu alloy by a Centrifugal in-situ Method Reviewed
Yoshimi Watanabe, Hisashi Sato, Tetsuro Ogawa and Ick-Soo Kim
Materials Transactions 48 ( 11 ) 2945 - 2952 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Corrosion Behavior of Al-7wt% Si-1.5wt% Cu Severely Deformed by Equal-Channel Angular Pressing Reviewed International journal
Zuogui Zhang, Eiji Akiyama, Yoshimi Watanabe, Yasuyuki Katada and Kaneaki Tsuzaki
Materials Science Forum 539-543 2892 - 2897 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Co Addition Effect On The Precipitation Behavior of Laves Phase In Fe-10Cr Ferritic Alloy Reviewed International journal
I. S. Kim, S. M. Lee, J. Y. Kim, Y. Watanabe, H. Sato, Z. Zhang, H. R. Jung and C. Y. Kang
Materials Science Forum 561-565 1745 - 1748 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Biodegradable Fiber Reinforced Ti Composite Fabricated by Spark Plasma Sintering Method Reviewed International journal
Hisashi Sato, Sei-ichiro Umaoka, Yoshimi Watanabe, Ick-Soo Kim, Masakazu Kawahara and Masao Tokida
Materials Science Forum 539-543 3201 - 3206 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Bending Strength of Fe-Mn-Si-Cr Shape Memory Alloy Machining Chips Reinforced Smart Composite
Yoshimi Watanabe, Teppei Wakatsuki, Hisashi Sato and Tadakatsu Maruyama
Proceedings of 16th International Conference on Composite Materials ( MoHA2-04 ) 1 - 6 2007.04
Language：English Publishing type：Research paper (international conference proceedings)
-
Application of Nanofiber Nonwoven Fabrics via Mass Production Electrospinning
S. M. Lee, A. Yokoyama, J. C. Park, H. Y. Kim, M. S. Khil, Y. Watanabe, Jooyong Kim, I. S. Kim
The 9th Asian Textile Conference, Paper ( A04-05 ) 1 - 4 2007.04
Publishing type：Research paper (international conference proceedings)
-
Effect of alpha-Al/Al3Ni Microstructure on the Corrosion Behaviour of Al-5.4 wt% Ni Alloy Fabricated by Equal-Channel Angular Pressing Reviewed International journal
Z. G. Zhang, E. Akiyama, Y. Watanabe, Y. Katada and K. Tsuzaki
Corrosion Science 49 ( 7 ) 2962 - 2972 2007.04
Language：English Publishing type：Research paper (scientific journal)
-
Effects of Platelet Size and Mean Volume Fraction on Platelet Orientation and Volume Fraction Distributions in Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method Reviewed
P. D. Sequeira, Yoshimi Watanabe, Hiroyuki Eryu, Tetsuya Yamamoto and Kiyotaka Matsuura
Journal of Engineering Materials and Technology, 129 ( 2 ) 304 - 312 2007.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1115/1.2712467
-
The Effect of Magnetic Field on Bonding Strength in Spot-Welded Stainless Steel Reviewed
Yoshimi Watanabe, Takeshi Takeda and Hisashi Sato
Proceedings of The 5th International Symposium on Electromagnetic Processing of Materials 612 - 617 2006.10
Publishing type：Research paper (international conference proceedings)
-
Development of Fe-Mn-Si-Cr Shape Memory Alloy Machining Chips Reinforced Smart Composite Reviewed
Tetsu-to-Hagane 92 ( 9 ) 562 - 566 2006.09
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2355/tetsutohagane1955.92.9_562
Other Link： https://www.jstage.jst.go.jp/article/tetsutohagane1955/92/9/92_9_562/_article/-char/ja/
-
Evaluation of Life time of Bag-filter by Optical Fiber Sensor Reviewed
5 ( 6 ) 35 - 42 2006.08
Language：Japanese Publishing type：Research paper (scientific journal)
-
Application of s-FEM to the Problems of Composite Materials with Initial Strain-like Terms Reviewed International journal
Satoyuki Tanaka, Hiroshi Okada, Yoshimi Watanabe and Teppei Wakatsuki
International Journal for Multiscale Computational Engineering 4 ( 4 ) 411 - 428 2006.04
Language：English Publishing type：Research paper (scientific journal)
-
センサー融合システムを用いたナノファイバーウェブのPore size 測定法 Reviewed International coauthorship
金 周瑢，渡辺義見，金 翼水
繊維学会誌 62 ( 12 ) 275 - 279 2006.04
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2115/fiber.62.275
-
細孔反応法にて作製したNi-Al系繊維強化傾斜機能材料の微細組織と機械的性質 Reviewed
佐藤 尚，権田信吾，渡辺義見，田中泰彦，梶原正憲
傾斜機能材料論文集 20 127 - 133 2006.04
Publishing type：Research paper (scientific journal)
-
Theoretical Study on Fabrication of Functionally Graded Material with Density Gradient by a Centrifugal Solid-Particle Method Reviewed
Tetsuro Ogawa, Yoshimi Watanabe, Hisashi Sato, I-S Kim and Yasuyoshi Fukui
Composites Part A 37 ( 12 ) 2194 - 2200 2006.04
Publishing type：Research paper (scientific journal)
-
Influence of microstructure on electrochemical properties of severely deformed Al-5 wt% Cu alloy by ECAP Reviewed International journal
Materials Science Forum 519-521 705 - 710 2006.04
Language：English Publishing type：Research paper (scientific journal)
-
Grain Refining Performance for Al and Al-Si Alloy by Addition of Equal-Channel Angular Pressed Al-5mass%Ti Alloy Reviewed International coauthorship
Zuogui Zhang, Shigemitsu Hosoda, Ick Soo Kim and Yoshimi Watanabe
Materials Science and Engineering: A A425 55 - 63 2006.04
Publishing type：Research paper (scientific journal)
-
Grain Refinement Performance of Aluminum Cast-Alloy by Deformed Al-Al3Ti Alloy Refiner Reviewed
Hisashi Sato, Kentaro Ota, Zuogui Zhang, Kaneaki Tsuzaki and Yoshimi Watanabe
Materials Science Forum 519-521 1859 - 1864 2006.04
Language：English Publishing type：Research paper (scientific journal)
-
Fiber-Reinforced Functionally Graded Materials Fabricated by a Centrifugal in-situ Method from Al-Cu-Fe Ternary Alloy Reviewed International journal
Yoshimi Watanabe, Masahito Kurahashi, I-S Kim, Shinya Miyazaki, Shinji Kumai, A. Sato and Shun-ichiro Tanaka
Composites Part A 37 ( 12 ) 2186 - 2193 2006.04
Language：English Publishing type：Research paper (scientific journal)
-
Effect of Magnetic Field on Weld Zone by Spot-welding in Stainless Steel Reviewed
Yoshimi Watanabe, Takeshi Takeda and Hisashi Sato
ISIJ International 46 ( 9 ) 1292 - 1296 2006.04
Language：English Publishing type：Research paper (scientific journal)
-
Magnetically Graded Ni3Al Fabricated by Inhomogeneous Deformation and Heat Treatment Reviewed International journal
Yoshimi Watanabe, Yusuke Fukada and Hideki Hosoda
Journal of Intelligent Material Systems and Structures 17 ( 12 ) 1105 - 1113 2006.04
Language：English Publishing type：Research paper (scientific journal)
-
Characteristic of Al-Al3Fe Eco-Functionally Graded Material through Near-Net-Shape Forming over Eutectic Melting Temperature Reviewed International coauthorship International journal
Kazuhisa Yamagiwa, Yoshimi Watanabe, Koichi Matsuda, Yasuyoshi Fukui and Plato Kapranos
Materials Science and Engineering: A A416 ( 1-2 ) 80 - 91 2006.01
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.msea.2005.10.031
Other Link： http://www.sciencedirect.com/science/article/pii/S0921509305012542
-
Microstructures of functionally graded materials fabricated by centrifugal solid-particle and in-situ methods International journal
Y. Watanabe, I. S. Kim, and Y. Fukui
Metals and Materials International 11 ( 5 ) 391 - 399 2005.10
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/BF03027510
Other Link： http://link.springer.com/article/10.1007/BF03027510
-
Effect of Precipitation of σ-Phase and N addition on the Mechanical Properties in 25Cr-7Ni-4Mo-2W Super Duplex Stainless Steel Reviewed International coauthorship
Soo-Cheon Kim, Zuogui Zhang, Yuji Furuya, Chang-Yong Kang, Jang-Hyun Sung, Qing-Qing Ni, Yoshimi Watanabe and Ick-soo Kim
Materials Transactions 46 ( 7 ) 1656 - 1662 2005.07
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans.46.1656
Other Link： https://www.jim.or.jp/journal/e/46/07/1656.html
-
Al-Al3Ti FGMs Produced by an In-Situ Centrifugal Method Reviewed
P.D. Sequeira, Yoshimi Watanabe and Yoshihiro Oya-Seimiya
Functionally Graded Materials 19 7 - 12 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
重力場と遠心力場での円盤状粒子の挙動 Reviewed
鳥居修一，田中智之，矢野利明，渡辺義見
傾斜機能材料論文集 19 13 - 18 2005.04
Publishing type：Research paper (scientific journal)
-
金属基傾斜機能材料の腐食性評価 Reviewed
野田和彦，渡辺義見
傾斜機能材料論文集 19 109 - 113 2005.04
Publishing type：Research paper (scientific journal)
-
遠心力晶出法によるAl-Al2Cu 傾斜機能材料作製時の冷却速度分布の推算 Reviewed
村上智矢，佐藤尚，渡辺義見
傾斜機能材料論文集 19 1 - 6 2005.04
Publishing type：Research paper (scientific journal)
-
遠心力晶出法で作製したAl-Al3Ni傾斜機能材料の時効による組織変化 Reviewed
松田公一，渡辺義見
2004年度傾斜機能材料論文集 13 - 18 2005.04
Publishing type：Research paper (scientific journal)
-
アルミナ球/テフロンチューブ系フォトニック結晶の創製 Reviewed
堀田孟宏，渡辺義見，桐原聡秀，宮本欽生
傾斜機能材料論文集 19 19 - 24 2005.04
Publishing type：Research paper (scientific journal)
-
ZK60A合金を用いて作製したマグネシウム基傾斜機能材料 Reviewed
渡辺義見，佐藤隆芳，金 翼水，三浦誠司，三浦博己
2004年度傾斜機能材料論文集 1 - 6 2005.04
Publishing type：Research paper (scientific journal)
-
Particle Distribution and Orientation in Al-Al3Zr and Al-Al3Ti FGMs Produced by the Centrifugal Method Reviewed International coauthorship International journal
P. D. Sequeira, Yoshimi Watanabe and L. A. Rocha
Materials Science Forum 492-493 609 - 614 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Orientation Dependence of Ductility of Mg Single Crystals at Elevated Temperature Reviewed International journal
H. Miura, T. Sakai, H. Nogawa, X. Yang, Y. Watanabe and S. Miura
Materials Science Forum 488-489 193 - 196 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Magnesium-based Functionally Graded Material Fabricated by a Centrifugal Method from ZK60A Alloy Reviewed
Yoshimi Watanabe, Ryuho Sato, Ick-Soo Kim, Seiji Miura and Hiromi Miura
Materials Transactions 46 944 - 949 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Graded Microstructure at Fiber / Copper Matrix Interface in FRM Fabricated by a Reaction at Narrow Holes Method Reviewed International journal
Yasuhiko Tanaka, Takeshi Goto and Yoshimi Watanabe
Materials Science Forum 492-493 737 - 742 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Formation of Compositional Gradient during Fabrication of FGMs by a Centrifugal in-situ Method Reviewed International journal
Yoshimi Watanabe, Shin Oike and Ick-Soo Kim
Materials Science Forum 492-493 693 - 698 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Effect of Texture Evolution on Tensile Properties of Al-Ni Eutectic Alloy Fabricated by Equal Channel Angular Pressing Reviewed International journal
Zuogui Zhang, Yoshimi Watanabe and Icksoo Kim
Materials Science and Technology 21 ( 6 ) 708 - 714 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Development of Fe-Mn-Si-Cr Shape Memory Alloy Fiber Reinforced Plaster-based Smart Composites Reviewed International journal
Teppei Wakatsuki, Yoshimi Watanabe and Hiroshi Okada
Materials Science Forum 475-479 2063 - 2066 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Characterization of Al3Fe Particle within Al-Al3Fe Functionally Graded Material Fabricated by Semi-Solid Forming Reviewed International journal
Koichi Matsuda, Yoshimi Watanabe, Kazuhisa Yamagiwa and Yasuyoshi Fukui
Materials Science Forum 475-479 1503 - 1506 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Backward Extrusion of Al-Al_3_Ti Functionally Graded Material: Volume Fraction Gradient and Anisotropic Orientation of Al_3_Ti Particles Reviewed International journal
P. D. Sequeira, Yoshimi Watanabe and Yasuyoshi Fukui
Scripta Materialia 53 687 - 692 2005.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/j.scriptamat.2005.05.029
Other Link： http://www.sciencedirect.com/science/article/pii/S1359646205003295
-
Analysis of Dispersed Particle Motion for Forming Gradient Structure in the Rotating Drum Reviewed
Shuichi Torii, Satoyuki Tanaka, Toshiaki Yano and Yoshimi Watanabe
I. J. Trans. Phenomena 7 23 - 30 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Aluminum Matrix Texture in Al-Al3Ti FGMs Produced by a Centrifugal Method Reviewed International journal
P. D. Sequeira, Yoshimi Watanabe and L. A. Rocha
Solid State Phenomena 105 415 - 420 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
High Temperature Deformation and Extended Plasticity in Mg Single Crystals Reviewed International journal
H. Miura, X. Yang, T. Sakai, H. Nogawa, Y. Watanabe, S.Miura and J. J. Jonas
Philosophical Magazine A 85 ( 30 ) 3553 - 3565 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Formation Mechanism of Graded Composition in Al-Al_2_Cu Functionally Graded Materials Fabricated by a Centrifugal in-situ Method Reviewed
Yoshimi Watanabe and Shin Oike
Acta Mater. 53 1631 - 1641 2005.04
Language：English Publishing type：Research paper (scientific journal)
-
Microstructure and Refining Performance of an Al-5Ti-0.25C Refiner before and after Equal-Channel Angular Pressing Reviewed International coauthorship International journal
Zuogui Zhang, Yoshimi Watanabe, Ick Soo Kim, Xiangfa Liu and Xiufang Bian
Metallurgical and Materials Transactions A 36A ( 13 ) 837 - 844 2005.04
Language：English Publishing type：Research paper (scientific journal) Publisher：Springer Nature
-
TEM Observation of the Reduction of Wustite by Hydrogen Ion Implantation Reviewed
Nobuhiro Ishikawa, Mingui Song, Kazutaka Mitsuishi, Kazuo Furuya, Yoshimi Watanabe and Takashi Inami
ISIJ International 44 ( 12 ) 2039 - 2042 2004.12
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2355/isijinternational.44.2029
Other Link： https://www.jstage.jst.go.jp/article/isijinternational1989/44/12/44_12_2029/_article
-
Use of Recycled Steel Machining Chips and Aluminum Can Shreds for Synthesizing Iron Aluminide Intermetallic Alloys Reviewed
Kiyotaka Matsuura, Yoshimi Watanabe and Yasushi Hirashima
ISIJ International 44 ( 7 ) 1258 - 1262 2004.07
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2355/isijinternational.44.1258
Other Link： https://www.jstage.jst.go.jp/article/isijinternational1989/44/7/44_7_1258/_article
-
A Study on the Visualization of Gas-Particle Two-phase Flow Through Model of Bag-Filter in a Dust Collector of the Waste Incinerator
Shigeru Hinata, Satoshu Shimakawa, Nobuhiro Himeno, Limin Bao, Yoshimi Watanabe, Takamasa Kishima and Ichio Ichimura
China-Japan Conference on Mechatoronics (CJCM-I), Proceeding 99 - 100 2004.04
Language：English Publishing type：Research paper (international conference proceedings)
-
表面pH分布測定による傾斜機能材料の耐食性評価 Reviewed
野田和彦，小野孝也，升田博之，渡辺義見
2003年度傾斜機能材料論文集 258 - 263 2004.04
Publishing type：Research paper (scientific journal)
-
細孔反応法で作製した繊維強化複合材料における繊維/母相間の組織傾斜 Reviewed
渡辺義見，後藤岳志
2003年度傾斜機能材料論文集 81 - 86 2004.04
Publishing type：Research paper (scientific journal)
-
遠心力固相法によるチタン粒子分散マグネシウム基傾斜機能材料の開発 Reviewed
佐藤隆芳，渡辺義見，三浦誠司，三浦博己
軽金属 54 ( 11 ) 521 - 525 2004.04
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.54.522
-
Wear of Soft Fabric by Sintered Magnetite Compact -How to Evaluate the Lifetime of Bag-filter in Dust Collector- Reviewed
Yu Hirai, Yoshimi Watanabe and Shigeru Hinata
Trans. Mater. Res. Soc. Jpn 29 2073 - 2076 2004.04
Publishing type：Research paper (scientific journal)
-
Nickel-aluminides/Steel Clad Pipe Fabricated by Reactive Centrifugal Casting Method from Liquid Aluminum and Solid Nickel Reviewed International journal
Yoshimi Watanabe, Satoru Watanabe and Kiyotaka Matsuura
Metall. Mater. Trans. A. 35A 1517 - 1524 2004.04
Language：English Publishing type：Research paper (scientific journal)
-
Mechanical Properties of Functionally Graded Materials Fabricated from Dilute Al-Cu Alloy Reviewed
Tetsuro Ogawa and Yoshimi Watanabe
Trans. Mater. Res. Soc. Jpn 29 2061 - 2064 2004.04
Publishing type：Research paper (scientific journal)
-
Magnetically Graded Materials Fabricated by Inhomogeneous Heat Treatment of Deformed Stainless Steel Reviewed International journal
Yoshimi Watanabe and Ippei Momose
Ironmaking & Steelmaking 31 ( 3 ) 265 - 268 2004.04
Language：English Publishing type：Research paper (scientific journal)
-
Grain Refining and Mechanical Properties of Equal-Channel Angular Pressed Al-Ni Alloy Reviewed
Zuogui Zhang and Yoshimi Watanabe
Trans. Mater. Res. Soc. Jpn 29 2057 - 2060 2004.04
Publishing type：Research paper (scientific journal)
-
Grain Refinement and Mechanical Property of Al-Si-Cu Alloy Fabricated by Equal-Channel Angular Pressing
Zuogui Zhang and Yoshimi Watanabe
China-Japan Conference on Mechatoronics (CJCM-I), Proceeding 49 - 52 2004.04
Publishing type：Research paper (international conference proceedings)
-
Functionally Graded Material with Density Gradient Fabricated by a Centrifugal Solid-Particle Method
Tetsuro Ogawa, Yoshimi Watanabe and Yasuyoshi Fukui
11th US-Japan Conference on Composite Materials and International Conference on Textile Composites, Extended abstract booklet MMC9 - 1 2004.04
Publishing type：Research paper (international conference proceedings)
-
Fiber-Reinforced Functionally Graded Materials Fabricated by a Centrifugal in-situ Method from Al-Cu-Fe Ternary Alloy
Yoshimi Watanabe, Masahito Kurahashi, I-S Kim, Shinya Miyazaki, Shinji Kumai, A. Sato and Shun-ichiro Tanaka
11th US-Japan Conference on Composite Materials and International Conference on Textile Composites, Extended abstract booklet MMC8 - 1 2004.04
Publishing type：Research paper (international conference proceedings)
-
Experimental and Theoretical Study on Suspended Particle Motion in Axially Rotating Drum Reviewed
Shuichi Torii, Satoyuki Tanaka, Toshiaki Yano and Yoshimi Watanabe
I. J. Trans. Phenomena 6 189 - 195 2004.04
Publishing type：Research paper (scientific journal)
-
Evaluation of Particle Size and Particle Shape Distributions in Al-Al3Ni FGMs Fabricated by a Centrifugal in-situ Method Reviewed
Yoshimi Watanabe, Ryuho Sato, Koichi Matsuda and Yasuyoshi Fukui
Sci. Eng. Comp. Mater 11 185 - 199 2004.04
Language：English Publishing type：Research paper (scientific journal)
-
Effect of Precipitation of Sigma Phase and N Addition on the Mechanical Properties in Super Duplex Stainless Steel
Feng Meng, Yuji Furuya, Zuogui Zhang, Soo-Cheon Kim, Chang-Yong Kang, Yoshimi Watanabe and Ick-soo Kim
China-Japan Conference on Mechatoronics (CJCM-I), Proceeding 55 - 58 2004.04
Publishing type：Research paper (international conference proceedings)
-
Effect of microstructure on the High Temperature Tensile Properties of Fe-17% Cr Nano-Sized Oxide Dispersion Strengthened Ferritic Alloy Reviewed
Ick-Soo Kim, Yoshimi Watanabe, Young-Bok Lee, Jinsung Jang, Chang-Young Kang and Kazuya. Miyahara
J. of the Korean Institute of Metals and Materials 42 ( 2 ) 109 - 116 2004.04
Publishing type：Research paper (scientific journal)
-
Cotton Yarn / TiO_2_ Dispersed Resin Photonic Crystals with Straight and Wavy Structures
Yoshimi Watanabe, Takanobu Kobayashi, Soshu Kirihara, Yoshinari Miyamoto and Kazuaki Sakoda
The European Physical Journal B 39 295 - 300 2004.04
Publishing type：Research paper (scientific journal)
-
Biodegradability of Poly (L-lactic Acid) Functionally Graded Materials with Hardness Gradient Reviewed
Yoshimi Watanabe, Takashi Iwamoto, Akira Teramoto, Koji Abe and Yutaka Ohkoshi
Materials Transactions 45 ( 4 ) 1005 - 1009 2004.04
Language：English Publishing type：Research paper (scientific journal)
Other Link： https://doi.org/10.2320/matertrans.45.1005
-
Application of S-Version FEM to the Mesoscopic Analysis of Wavy Shape Memory Fiber/ Plaster Smart Composite
Satoyuki Tanaka, Hiroshi Okada and Yoshimi Watanabe
WCCM VI in conjunction with APCOM'04, (CD-ROM) 1 - 8 2004.04
Language：English Publishing type：Research paper (international conference proceedings)
-
Al-Al3Ti傾斜機能材料の粒子配向に及ぼす粒子径および粒子体積分率の影響 Reviewed
江竜寛之，山本哲也，渡辺義見，松浦清隆
2003年度傾斜機能材料論文集 209 - 214 2004.04
Publishing type：Research paper (scientific journal)
-
Novel Recycling System of Al and Fe Wastes - in-situ Al-Al3Fe Functionally Graded Material Manufactured by a Centrifugal Method - Reviewed
Kazuhisa Yamagiwa, Yoshimi Watanabe, Yasuyoshi Fukui and Plato Kapranos
Materials Transactions 44 ( 12 ) 2461 - 2467 2003.12
Language：English Publishing type：Research paper (scientific journal)
-
High-Tc Superconducting Quantum Interference Device Microscope Observation of Heat Affected Zone in Spot Welded Fe-Cr-Ni System Reviewed International coauthorship International journal
Yoshimi Watanabe, S. H. Kang, J. W. Chan, J. W. Morris, Jr. and John Clarke
Applied Physics Letters 83 ( 9 ) 1878 - 1880 2003.08
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1063/1.1599039
Other Link： http://scitation.aip.org/content/aip/journal/apl/83/9/10.1063/1.1599039
-
Analysis of Dispersed Particle Motion Forming Gradient Structure in the Rotating Drum
Satoyuki Tanaka, Shuichi Torii, Toshiaki Yano and Yoshimi Watanabe
Recent Progress in Transport Phenomena, Proceedings of The 14th International Symposium on Transport Phenomena 557 - 561 2003.04
Language：English Publishing type：Research paper (international conference proceedings)
-
硬さ傾斜を有する医療用傾斜機能材料の開発 Reviewed
渡辺義見，岩元貴志，寺本 彰，阿部康次
傾斜機能材料論文集 16 31 - 36 2003.04
Publishing type：Research paper (scientific journal)
-
Strengthening of Plaster Matrix Composite by Fe-Mn-Si-Cr Shape Memory Fiber
Yoshimi Watanabe and Eiichi Miyazaki
New Applications of Advanced Composites, Proceedings of the Third Japan-Canada Joint Conference 211 - 220 2003.04
Publishing type：Research paper (international conference proceedings)
-
Preparation of Magnetic Poly(vinyl alcohol)(PVA) Materials by In Situ Synthesis of Magnetite in a PVA Matrix Reviewed International journal
Hai Lin, Yoshimi Watanabe, Mutsumi Kimura, Kenji Hanabusa and Hirofusa Shirai
Journal of Applied Polymer Science 87 ( 8 ) 1239 - 1247 2003.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1002/app.11520
-
Mechanical Properties of Wavy SMA Fibers Reinforced Smart Composite Reviewed
Yoshimi Watanabe, Eiichi Miyazaki and Hiroshi Okada
Trans. Mater. Res. Soc. Jpn 28 671 - 674 2003.04
Publishing type：Research paper (scientific journal)
-
Fabrication of Nickel-Aluminides Fiber / Nickel Composite by Reaction at Narrow Holes Reviewed International journal
Yoshimi Watanabe and Takeshi Goto
Materials Science Forum 426-432 1957 - 1962 2003.04
Language：English Publishing type：Research paper (scientific journal)
-
Experimental Study on Magnetic Torque Measurement to Estimate Fiber-Orientation in Fe-Fiber Reinforced Composites Reviewed
Yoshimi Watanabe and Toshiyuki Fujii
Jpn J. Appl. Phys. 42 L391 - L393 2003.04
Publishing type：Research paper (scientific journal)
DOI： 10.1143/JJAP.42.L391
-
Direct Evaluation of Three-Dimensional Platelet Orientation in Functionally Graded Model-Material Fabricated by a Centrifugal Method Reviewed International journal
Hiroyuki Eryu, Tetsuya Yamamoto and Yoshimi Watanabe
Materials Science Forum 423-425 315 - 320 2003.04
Language：English Publishing type：Research paper (scientific journal)
-
Development of Shape Memory Alloy Fiber Reinforced Smart FGMs Reviewed International journal
Eiichi Miyazaki and Yoshimi Watanabe
Materials Science Forum 423-425 107 - 112 2003.04
Language：English Publishing type：Research paper (scientific journal)
-
Cu-Fe磁気傾斜機能材料の作製方法ならびに磁気特性 Reviewed
清宮義博，柳津和宏，篠田哲守，渡辺義見
銅と銅合金 42 345 - 348 2003.04
Publishing type：Research paper (scientific journal)
-
Control of Magnetic Gradient in Magnetically Graded Material Fabricated by Martensitic Transformation Technique Reviewed International journal
Yoshimi Watanabe and Hiroshi Sakai
Materials Science Forum 423-425 435 - 440 2003.04
Language：English Publishing type：Research paper (scientific journal)
-
Analysis of Suspended Particle Motion in the High Speed Rotation Drum
Satoyuki Tanaka, Shuichi Torii, Toshiaki Yano and Yoshimi Watanabe
New Applications of Advanced Composites, Proceedings of the Third Japan-Canada Joint Conference 247 - 256 2003.04
Language：English Publishing type：Research paper (international conference proceedings)
-
Effect of Annealing on Saturation Magnetization in Deformed Cu-Fe Alloys with Transformed Fe Particles Reviewed International journal
Yoshimi Watanabe, Jun-ichi Murakami and Hiromi Miura
Materials Science and Engineering: A 338 ( 1-2 ) 299 - 304 2002.12
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/S0921-5093(02)00089-8
Other Link： http://www.sciencedirect.com/science/article/pii/S0921509302000898
-
Enhanced Mechanical Properties of Fe-Mn-Si-Cr Shape Memory Fiber / Plaster Smart Composite Reviewed
Yoshimi Watanabe, Eiichi Miyazaki and Hiroshi Okada
Materials Transactions 43 ( 5 ) 974 - 983 2002.05
Language：English Publishing type：Research paper (scientific journal)
-
In-situ Observation of Transformation in alpha-Fe2O3 induced by Hydrogen Implantation Reviewed International journal
Yoshimi Watanabe, Kuniyoshi Ishii, Nobuhiro Ishikawa, Kazuo Furuya and Masaharu Kato
Journal of Physics: Condensed Matter 14 13643 - 13651 2002.04
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1088/0953-8984/14/49/318
Other Link： http://iopscience.iop.org/article/10.1088/0953-8984/14/49/318
-
フラクタル解析による粒子形状傾斜型傾斜機能材料の評価 Reviewed
松田公一，渡辺義見，上條正義，福井泰好
傾斜機能材料論文集 15 125 - 130 2002.04
Publishing type：Research paper (scientific journal)
-
遠心鋳造法によるin-situ Cu-Fe磁気的傾斜機能材料の開発 Reviewed
清宮義博，宇都宮志保，篠田哲守，渡辺義見
銅と銅合金 41 35 - 38 2002.04
Publishing type：Research paper (scientific journal)
-
Phase Stability in Wear-Induced Supersaturated Al-Ti Solid Solution Reviewed International journal
Yoshimi Watanabe, Kazuyuki Yokoyama and Hideki Hosoda
Materials Science Forum 396-402 1467 - 1472 2002.04
Language：English Publishing type：Research paper (scientific journal)
-
Particle Size Distributions in Functionally Graded Materials Fabricated by the Centrifugal Solid-Particle Method Reviewed International journal
Yoshimi Watanabe, Akihiro Kawamoto and Koichi Matsuda
Composites Science and Technology 62 ( 6 ) 881 - 888 2002.04
Language：English Publishing type：Research paper (scientific journal)
-
Particle Shape Distribution in Al-Al3Ni Functionally Graded Materials Fabricated by a Centrifugal in-situ Method
Koichi Matsuda, Ryuho Sato and Yoshimi Watanabe
Proceedings of the Fourth Joint Canada-Japan Workshop on Composites 77 - 84 2002.04
Publishing type：Research paper (international conference proceedings)
-
Optimization of the in-situ Al-Si base Functionally Graded Material Fabricated by Centrifugal Casting Reviewed
Yoshihiro Oya-Seimiya, Tetsumori Shinoda and Yoshimi Watanabe
Mat. Res. Soc. Symp. Proc. 707 333 - 338 2002.04
Publishing type：Research paper (international conference proceedings)
-
Functionally Graded Material of Biodegradable Poly(L-lactic acid) with Hardness Gradient
Yoshimi Watanabe, Takashi Iwamoto, Akira Teramoto and Koji Abe
Proceeding, International Conference for Inauguration of SOTSEA 384 - 387 2002.04
Publishing type：Research paper (international conference proceedings)
-
Experimental Study on Particle Motions in Functionally Graded Materials by Centrifugal Method
Satoyuki Tanaka, Shuichi Torii, Toshiaki Yano and Yoshimi Watanabe
Progress in Transport Phenomena (Proc. of The 13th International Symposium on Transport Phenomena) 203 - 206 2002.04
Publishing type：Research paper (international conference proceedings)
-
Evaluation of Fiber Orientation in Ferromagnetic Short-Fiber Composites by Magnetic Anisotropy Reviewed International journal
Yoshimi Watanabe
Journal of Composite Materials 36 ( 8 ) 915 - 923 2002.04
Language：English Publishing type：Research paper (scientific journal)
-
Evaluation of Casting Textures in Al/Al3Ti Platelet Functionally Graded Materials Fabricated by a Centrifugal Method Reviewed International journal
Yoshimi Watanabe, Hiroyuki Eryu, Tetsuya Yamamoto, Sutandyo Andiarwanto and Hiromi Miura
Materials Science Forum 408-412 1771 - 1776 2002.04
Language：English Publishing type：Research paper (scientific journal)
-
Development of in-situ Cu-Fe based Magnetically Graded Composite by the Centrifugal Casting
Yoshihiro Oya-Seimiya, Tetsumori Shinoda and Yoshimi Watanabe
Proceedings of Ninth Annual International Conference on Composites Engineering (ICCE/9) 583 - 584 2002.04
Publishing type：Research paper (international conference proceedings)
-
CT法を用いた磁気的傾斜機能材料の非破壊評価 Reviewed
渡辺義見，酒井博詞，中島隆行
傾斜機能材料論文集 15 61 - 66 2002.04
Publishing type：Research paper (scientific journal)
-
Physical Properties of Ferromagnetic PVA Fiber fabricated by Wet-spinning Method Reviewed
Hai Lin, Koichi Matsuda, Yoshimi Watanabe, Mutsumi Kimura and Hirofusa Shirai
Trans. Mater. Res. Soc. Jpn 26 275 - 278 2001.04
Publishing type：Research paper (scientific journal)
-
Particle Size Distributions in in-situ Al-Al3Ni FGMs Fabricated by Centrifugal in-situ Method Reviewed
Koichi Matsuda, Yoshimi Watanabe and Yasuyoshi Fukui
Ceramic Trans. 114 491 - 498 2001.04
Publishing type：Research paper (scientific journal)
-
Particle Size Distributions in Al-Al3Ni Functionally Graded Materials Fabricated by a Semisolid Forming
Koichi Matsuda, Yoshimi Watanabe, Kazuhisa Yamagiwa and Yasuyoshi Fukui
Proceedings of 7th Japan International SAMPE Symposium 681 - 684 2001.04
Publishing type：Research paper (international conference proceedings)
-
Observation of Magnetic Gradients in Stainless Steel with a High-Tc Superconducting Quantum Interference Device Microscope Reviewed International coauthorship International journal
Yoshimi Watanabe, S. H. Kang, J. W. Chan, J. W. Morris, Jr., T. J. Shaw and John Clarke
Journal of Applied Physics 89 1977 - 1982 2001.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1063/1.1334637
-
New Fabrication Method for 3-D Photonic Crystals by Application of Textile Technology - Cotton Yarn / TiO2 Dispersed Resin System -
Y. Watanabe, T. Kobayashi, S. Kirihara and Y. Miyamoto
The 6th Asian Textile Conference, Proceedings ( 252 ) 1 - 8 2001.04
Publishing type：Research paper (other academic)
-
Microstructures and Wear Resistances of Hybrid Al - (Al_3_Ti + Al_3_Ni) FGMs by Centrifugal Method Reviewed
Intermetallics 9 33 - 43 2001.04
Language：English Publishing type：Research paper (scientific journal)
-
Microstructural Changes in an Al-Al3Ti Composite by Equal Channel Angular Extrusion
Shigemitu Hosoda and Yoshimi Watanabe
Proceedings of 7th Japan International SAMPE Symposium 673 - 676 2001.04
Publishing type：Research paper (international conference proceedings)
-
Micro-hardness Measurements to Evaluate Composition Gradient by in Metal-Based Functionally Graded Materials Reviewed
Yoshimi Watanabe, Noboru Yamanaka, Yoshihiro Oya-Seimiya and Yasuyoshi Fukui
Z. Metallkd. 92 53 - 57 2001.04
Publishing type：Research paper (scientific journal)
-
Magnetic Polyvinyl Alcohol Materials Containing Magnetite Nanoparticles
H. Lin, K. Matsuda, Y. Watanabe, M. Kimura, K. Hanabusa and H. Shirai
The 6th Asian Textile Conference, Proceedings ( 238 ) 1 - 6 2001.04
Publishing type：Research paper (international conference proceedings)
-
Improvements of Mechanical Properties by Shape Memory Effect in Fe-Mn-Si-Cr Fiber / Plaster Composites Reviewed
Eiichi Miyazaki and Yoshimi Watanabe
Proceedings of PRICM4 1635 - 1638 2001.04
Publishing type：Research paper (international conference proceedings)
-
Growth Kinetics of Al3Ni Primary Crystal Particles in an Al-20mass%Ni Alloy Reviewed
Koichi Matsuda, Yoshimi Watanabe and Masaharu Kato
Trans. Mater. Res. Soc. Jpn 26 279 - 282 2001.04
Publishing type：Research paper (scientific journal)
-
Formation of Non-equilibrium Phase by Wear Test of Al-Ti Alloy Reviewed
Kazuyuki Yokoyama and Yoshimi Watanabe
Trans. Mater. Res. Soc. Jpn 26 303 - 306 2001.04
Publishing type：Research paper (scientific journal)
-
Fabrication of Nickel-aluminides by Reactive Centrifugal Casting Method from Liquid Aluminum and Solid Nickel Reviewed
Satoru Watanabe, Yoshimi Watanabe and Kiyotaka Matsuura
Proceedings of PRICM4 1951 - 1954 2001.04
Publishing type：Research paper (international conference proceedings)
-
Fabrication of Magnetically Graded Material by Compression Deformation of Wedge-shaped Ni3Al Intermetallic Compound Reviewed
Yusuke Fukada, Yoshimi Watanabe and Hideki Hosoda
Trans. Mater. Res. Soc. Jpn 26 239 - 242 2001.04
Publishing type：Research paper (scientific journal)
-
Evaluation of Three-Dimensional Orientation of Al3Ti Platelet in Al based FGMs Fabricated by a Centrifugal Casting Technique Reviewed
Yoshimi Watanabe, Hiroyuki Eryu and Kiyotaka Matsuura
Acta Mater. 49 775 - 783 2001.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/S1359-6454(00)00384-0
Other Link： http://www.sciencedirect.com/science/article/pii/S1359645400003840
-
Development of in-situ Al-Al2Cu Functionally Graded Materials by a Centrifugal Method Reviewed International journal
Shin Oike and Yoshimi Watanabe
International Journal of Materials and Product Technology 16 ( 1-3 ) 40 - 49 2001.04
Language：English Publishing type：Research paper (scientific journal)
-
Anisotropy of Wear Resistance in Al-Al3Ti FGMs Fabricated by a Centrifugal Method Reviewed
Yoshimi Watanabe, Hiroyuki Eryu and Yasuyoshi Fukui
Ceramic Trans. 114 675 - 682 2001.04
Language：English Publishing type：Research paper (scientific journal)
-
Cyclic Deformation and Development of Dislocation Structures in a Centrifugally Cast Al-Al3Ti of Functionally Graded Material Reviewed
K. Yamashita, C. Watanabe, S. Kumai, M. Kato, A. Sato and Y. Watanabe
Materials Transactions, JIM 41 ( 10 ) 1322 - 1328 2000.10
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2320/matertrans1989.41.1322
Other Link： https://www.jstage.jst.go.jp/article/matertrans1989/41/10/41_10_1322/_article
-
Development of in-situ Al-Al2Cu Functionally Graded Materials by Centrifugal Method
Shin Oike and Yoshimi Watanabe
Proceedings of the 10th Iketani Conference on Materials Research Toward the 21st Century 329 - 330 2000.04
Publishing type：Research paper (international conference proceedings)
-
遠心力法により作製したin-situ傾斜機能材料における組成傾斜形成機構の検討 Reviewed
渡辺義見，松田公一，大池 新
傾斜機能材料論文集 14 37 - 42 2000.04
Publishing type：Research paper (scientific journal)
-
Using Magnetic Torque Measurement to Estimate Fiber-Orientation in Ferromagnetic Short-Fiber Reinforced Composites
Shigemitu Hosoda and Yoshimi Watanabe
The Fourth Japan-China Joint Conference on Composites, Transform Millennium with Composite Technology 80 - 81 2000.04
Publishing type：Research paper (international conference proceedings)
-
Near Net Shape Forming of Al-Al3Ni FGM over Eutectic Melting Temperature
Yasuyoshi Fukui, Hiroshi Okada, Noriyoshi Kumazawa and Yoshimi Watanabe
Metallurgical and Materials Transactions A 31A 2627 - 2636 2000.04
Publishing type：Research paper (scientific journal)
-
Magnetically Graded Material Produced by Martensitic Transformation in Stainless Steel
Yoshimi Watanabe
Proceedings of the 10th Iketani Conference on Materials Research Toward the 21st Century 127 - 128 2000.04
Publishing type：Research paper (international conference proceedings)
-
Fabrication of Functionally-Graded Aluminum Materials by the Centrifugal Method Reviewed
Yoshimi Watanabe and Yasuyoshi Fukui
Aluminum Trans. 2 195 - 209 2000.04
Publishing type：Research paper (scientific journal)
-
Direct Observation of Three-Dimensional Orientation in Aluminum Platelet-Reinforced Functionally Graded Model-Material
Tetsuya Yamamoto, Hiroyuki Eryu and Yoshimi Watanabe
The Fourth Japan-China Joint Conference on Composites, Transform Millennium with Composite Technology 78 - 79 2000.04
Publishing type：Research paper (international conference proceedings)
-
Magnetic Anisotropy Caused by Fiber Orientation in Short Fiber Reinforced Composites
Yoshimi Watanabe
Proceedings of International Conference on Advanced Fiber Materials 393 - 394 1999.10
Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)
-
High-Tc SQUID Microscope Analysis of Magnetic Gradients in Non-uniformly Deformed 305 Stainless Steel Reviewed
Yoshimi Watanabe, S. H. Kang, J. W. Chan, J. W. Morris, Jr., K. M. Krishnan, T. J. Shaw, K. Schlenga and John Clarke
Proceedings of NAGANO magel'100 227 - 230 1999.10
Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)
-
Fabrication of Magnetically Graded Material by Rolling of Wedge-shaped 304 Stainless Steel Reviewed International coauthorship
Yoshimi Watanabe, S. H. Kang, J. W. Chan and J. W. Morris, Jr.
Materials Transactions, JIM 40 ( 9 ) 961 - 966 1999.09
Language：English Publishing type：Research paper (scientific journal)
-
Detection of Phase Transformation of Fe Precipitates in Cu-Fe Alloy by Means of Magnetic Measurement Reviewed
M. Wusatowska-Sarnek, Yoshimi Watanabe, H. Miura and T. Sakai
Proceedings of NAGANO magel'99 259 - 262 1999.04
Publishing type：Research paper (international conference proceedings)
-
粒子径傾斜型傾斜機能材料の開発 Reviewed
松田公一，渡辺義見，福井泰好
傾斜機能材料論文集 13 47 - 52 1999.04
Publishing type：Research paper (scientific journal)
-
配向度傾斜型傾斜機能材料の開発 Reviewed
江竜寛之，渡辺義見
傾斜機能材料論文集 13 57 - 62 1999.04
Publishing type：Research paper (scientific journal)
-
Wear Behavior of Al-Al3Ti Composite Manufactured by Centrifugal Method Reviewed
Yoshimi Watanabe, Noboru Yamanaka and Yasuyoshi Fukui
Metall. Mater. Trans. A 30A 3253 - 3261 1999.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/s11661-999-0235-1
Other Link： http://link.springer.com/article/10.1007/s11661-999-0235-1
-
Magnetic Properties of an Annealed Cu-1.6mass%Fe Alloy with Transformed Iron Particles Reviewed
Jun-ich Murakami, Yoshimi Watanabe and Hiromi Miura
Proceedings of NAGANO magel'99 255 - 258 1999.04
Publishing type：Research paper (international conference proceedings)
-
Development of Recyclable Functionally Graded Materials
Yoshimi Watanabe and Yasuyoshi Fukui
Proceedings of The Fourth International Conference on ECOMATERIALS 495 - 498 1999.04
Publishing type：Research paper (international conference proceedings)
-
Fabrication of Magnetic Graded Fibers by Inhomogeneous Heat Treatments of SUS304 Stainless Steel
Fumitaka Tanaka and Yoshimi Watanabe
Proceedings of International Conference on Advanced Fiber Materials 1999.04
Publishing type：Research paper (international conference proceedings)
-
Three Dimensional Observation of Al3Ti Platelets in Al-Al3Ti FGMs Fabricated by Centrifugal Method Reviewed International journal
Hiroyuki Eryu and Yoshimi Watanabe
Materials Science Forum 308-311 199 - 210 1999.04
Language：English Publishing type：Research paper (scientific journal)
-
Fabrication of Hybrid Al-(Al3Ti+Al3Ni) FGMs by Centrifugal Method Reviewed
Tatsuru Nakamura, Yasunori Kato and Yoshimi Watanabe
Materials Science Forum 308-311 205 - 210 1999.04
Publishing type：Research paper (scientific journal)
-
Magnetic Functionally Graded Material Manufactured with α' to γ Reverse Martensitic Transformation in a Deformed SUS304 Stainless Steel Reviewed
Hiroshi Sakai, Daisuke Morishita and Yoshimi Watanabe
Materials Science Forum 308-311 579 - 584 1999.04
Publishing type：Research paper (scientific journal)
-
Measurements of Particle Size Distributions in Functionally Graded Materials Fabricated by Centrifugal Method
Koichi Matsuda, Akihiro Kawamoto and Yoshimi Watanabe
Proceedings of International Conference on Advanced Fiber Materials 387 - 390 1999.04
Publishing type：Research paper (international conference proceedings)
-
Wear Resistance of Al-Al3Ni Functionally Graded Materials Fabricated by Centrifugal Method
Kazuyuki Yokoyama, Hisashi Sato and Yoshimi Watanabe
Proceedings of International Conference on Advanced Fiber Materials 389 - 390 1999.04
Publishing type：Research paper (international conference proceedings)
-
真空遠心力法によるAl-Al3Fe傾斜機能材料の作製とその機械的性質評価 Reviewed
福井泰好，岡田 裕，熊澤典良，渡辺義見，山中 昇，清宮義博
軽金属 49 ( 1 ) 35 - 40 1999.01
Language：Japanese Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.49.35
-
Control of Composition Gradient in a Metal-Ceramic Functionally Graded Material Manufactured by the Centrifugal Method Reviewed
Yoshimi Watanabe, Noboru Yamanaka and Yasuyoshi Fukui
Composites Part A 29A 595 - 601 1998.04
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
-
Thermal Conductivity of Al/Al3Ni FGMs Manufactured by Centrifugal Method
Yoshimi Watanabe, Yasunori Kato, Yoshihiro Terada and Tetsuo Mohri
Proceedings of 5th International SAMPE Symposium 475 - 480 1997.04
Publishing type：Research paper (international conference proceedings)
-
硬さ測定による金属基傾斜機能材料の組成傾斜評価 Reviewed
山中 昇，清宮義博，渡辺義見，福井泰好
日本機械学会論文集(A編) 63 815 - 820 1997.04
Language：Japanese Publishing type：Research paper (scientific journal)
-
Characteristic of Rolling-Deformation in Metal-Intermetallic Functionally Graded Material
N. Yamanaka, Y. Watanabe and Y. Fukui
Proceedings of Third International Conference on Composites Engineering (ICCE/4) 1077 - 1078 1997.04
Publishing type：Research paper (international conference proceedings)
-
Orientation of Al3Ti Platelets in Al-Al3Ti Functionally Graded Material Manufactured by Centrifugal Method Reviewed
Yoshimi Watanabe, Noboru Yamanaka and Yasuyoshi Fukui
Z. Metallkd. 88 717 - 721 1997.04
Publishing type：Research paper (scientific journal)
-
Fabrication of Magnetic Functionally Graded Material by Martensitic Transformation Technique Reviewed
Yoshimi Watanabe, Yuzo Nakamura and Yasuyoshi Fukui
FUNCTIONALLY GRADED MATERIALS 1996 (Proceedings of FGM'96) 713 - 718 1997.04
Language：English Publishing type：Research paper (international conference proceedings)
-
TEM study of Al3Ti-Al, Al3Ni-Al Interface and Orientation Relationship in Centrifugally Cast Alloys Reviewed
Ken Yamashita, Yoshimi Watanabe, Noboru Yamanaka, Yasuyoshi Fukui and Akikazu Sato
Proceedings of 8th International Conference on Intergranular and Interphase Boundaries in Materials (JIMIS-8, iib96), 371 - 374 1996.04
Publishing type：Research paper (international conference proceedings)
-
Orientation Relationships and Transformation in Iron Oxides Reviewed International journal
Yoshimi Watanabe and Kuniyoshi Ishii
Materials Science Forum 207-209 369 - 372 1996.04
Language：English Publishing type：Research paper (scientific journal)
-
Microstructure and Wear Resistance of Al-Al3Ti Composites Manufactured by Centrifugal Method
Yoshimi Watanabe, Noboru Yamanaka and Yasuyoshi Fukui
Proceedings of Third International Conference on Composites Engineering (ICCE/3) 911 - 912 1996.04
Publishing type：Research paper (international conference proceedings)
-
Analysis of Thermal Residual Stress in a Thick-Walled Ring of Duralcan-Base Al-SiC Functionally Graded Material Reviewed International journal
Yasuyoshi Fukui and Yoshimi Watanabe
Metall. Mater. Trans. A 27A 4145 - 4151 1996.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/BF02595662
-
Reduction of Haematite to Magnetite Induced by Hydrogen Ion Implantation Reviewed International journal
Yoshimi Watanabe, Shinya Takemura, Yoshiaki Kashiwaya and Kuniyoshi Ishii
J. Phys. D, Appl. Phys. 29 ( 1 ) 8 - 13 1996.04
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1088/0022-3727/29/1/002
Other Link： http://iopscience.iop.org/article/10.1088/0022-3727/29/1/002/meta
-
Geometrical Consideration of the Crystallography of the Transformation from alpha-Fe_2_O_3_ to Fe_3_O_4_ Reviewed International journal
Yoshimi Watanabe and Kuniyoshi Ishii
physica status solidi (a) 150 673 - 686 1995.08
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
Other Link： http://onlinelibrary.wiley.com/doi/10.1002/pssa.2211500210/abstract
-
Thermal Conductivity of Aluminum/Shirasu FGM Manufactured by Centrifugal Method Reviewed
Zamrose Mat Salim, Noboru Yamanaka, Yoshimi Watanabe, Yasuyoshi Fukui and Shigetomo Nunomura
Proceedings of the 2nd Pacific Rim International Conference on Advanced Materals and Processing (PRICM-2) 2 1739 - 1744 1995.04
Publishing type：Research paper (international conference proceedings)
-
The Variation of Matrix Hardness with Gradient Composition in Aluminum Base Functionally Gradient Materials Reviewed
Noboru Yamanaka, Yoshihiro Oya­Seimiya, Yoshimi Watanabe and Yasuyoshi Fukui
Trans. Mater. Res. Soc. Jpn 16B 1279 - 1282 1995.04
Publishing type：Research paper (scientific journal)
-
遠心力法によるAl/Al3Ni傾斜機能材料の作製 Reviewed
福井泰好，山中 昇，渡辺義見，清宮義博
軽金属 44 622 - 627 1994.04
Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.44.622
Other Link： https://www.jstage.jst.go.jp/article/jilm1951/44/11/44_11_622/_article/-char/ja/
-
Microstructural Change in Hematite Induced by Hydrogen Implantation Reviewed
Proceedings of ICSTI '94 69 - 72 1994.04
Publishing type：Research paper (international conference proceedings)
-
Yield Stress of Aged Cu-Fe Alloy Single Crystals at Low Temperatures Reviewed International journal
J. Mater. Sci. Letters 13 ( 12 ) 922 - 924 1994.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/BF00273250
Other Link： http://link.springer.com/article/10.1007/BF00273250
-
シラス／アルミニウム合金傾斜機能材料の作製とその熱伝導特性 Reviewed
山中 昇，渡辺義見，福井泰好，布村成具
軽金属 44 ( 6 ) 330 - 335 1994.04
Publishing type：Research paper (scientific journal)
DOI： 10.2464/jilm.44.330
Other Link： https://www.jstage.jst.go.jp/article/jilm1951/44/6/44_6_330/_article/-char/ja/
-
Temperature Dependence of the Amount of Transformed Fe Particles in a Cu-1.5mass% Fe Alloy Reviewed International journal
Yoshimi Watanabe, Yasuyuki Takada, Hiromi Miura, Masaharu Kato and A. Sato
J. Mater. Sci. 28 ( 17 ) 4578 - 4582 1993.04
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/BF00414245
Other Link： http://link.springer.com/article/10.1007/BF00414245
-
A Magnetic-Functionally Graded Material Manufactured with Deformation-Induced Martensitic Transformation Reviewed International journal
Y. Watanabe, Y. Nakamura, Y. Fukui and K. Nakanishi
J. Mater. Sci. Letters 12 326 - 328 1993.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/BF01910093
Other Link： http://link.springer.com/article/10.1007/BF01910093
-
Training Effect in Fe-Mn-Si Shape-Memory Alloys Reviewed International journal
Yoshimi Watanabe, Yuji Mori and A. Sato
J. Mater. Sci. 28 1509 - 1514 1993.04
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
Other Link： http://link.springer.com/article/10.1007/BF00363341
-
SUS304ステンレス鋼のマルテンサイト変態を利用した磁気的傾斜機能材料 Reviewed
渡辺義見，中村祐三，福井泰好，中西賢二
日本機械学会論文集(A編) 59 ( 560 ) 1138 - 1143 1993.04
Authorship：Lead author Publishing type：Research paper (scientific journal)
Other Link： https://www.jstage.jst.go.jp/article/kikaia1979/59/560/59_560_1138/_article/-char/ja/
-
Magnetic Anisotropy Caused by the Formation of Stress-Induced Martensite in Small Iron Particles in a Copper Matrix Reviewed
Toshiyuki Fujii, Yoshimi Watanabe, Teruhiro Enami, Akikazu Sato and Masaharu Kato
ISIJ International 32 ( 9 ) 1027 - 1033 1992.09
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.2355/isijinternational.32.1027
Other Link： https://www.jstage.jst.go.jp/article/isijinternational1989/32/9/32_9_1027/_article
-
遠心力を利用した傾斜機能材料の組成制御 Reviewed
渡辺義見，福井泰好，中西賢二，武田吉男，山中 昇
日本機械学会論文集(A編) 58 ( 556 ) 2472 - 2477 1992.04
Publishing type：Research paper (scientific journal)
Other Link： https://www.jstage.jst.go.jp/article/kikaia1979/58/556/58_556_2472/_article/-char/ja/
-
Al/SiC傾斜機能材料厚肉リングにおける残留応力解析 Reviewed
福井泰好,米倉秀人,渡辺義見,中西賢二
複合・接合構造の創成技術と力学的評価シンポジウム講演論文集 ( 920-71 ) 88 - 93 1992.04
Publishing type：Research paper (other academic)
-
Formation of Fe16N2 and Development of Magnetic Anisotropy in a Fe-N Alloy Reviewed International journal
Y. Watanabe, H. Nozaki, M. Kato and A. Sato
Acta Metall. Mater. 39 ( 12 ) 3161 - 3166 1991.12
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/0956-7151(91)90050-B
Other Link： http://www.sciencedirect.com/science/article/pii/095671519190050B
-
Growth Kinetics and Martensitic Transformation of Large Fe Particles in a Cu-1.5mass%Fe Alloy Reviewed International journal
Y. Watanabe, M. Kato and A. Sato
J. Mater. Sci 26 ( 16 ) 4307 - 4312 1991.08
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1007/BF00543643
Other Link： http://link.springer.com/article/10.1007/BF00543643
-
Effect of Magnetic Fields on the Formation of Fe16N2 Precipitates in Fe-N Alloys Reviewed International journal
Yoshimi Watanabe, Akihiro Nakano and Akikazu Sato
Materials Science and Engineering: A A146 151 - 160 1991.04
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/0921-5093(91)90274-Q
Other Link： http://www.sciencedirect.com/science/article/pii/092150939190274Q
-
Growth of a Nitrogen Defect Cluster in a bcc Lattice Examined by a Lattice Theory Reviewed International coauthorship International journal
Yoshimi Watanabe, A. Sato and T. Mura
J. Phys. Chem. Solids 50 957 - 961 1990.09
Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)
DOI： doi:10.1016/0022-3697(89)90047-4
Other Link： http://www.sciencedirect.com/science/article/pii/0022369789900474
-
The Effect of Magnetic Field on the Martensitic Transformation of Fe Particles in a Cu-Fe Alloy Reviewed
Y. Watanabe, M. Kato and A. Sato
Materials Science Forum 56-58 241 - 246 1990.04
Language：English Publishing type：Research paper (scientific journal)
-
Formation of Fe16N2 Precipitates in Fe-N Alloys in an External Magnetic Field Reviewed
A. Sato, A. Nakano, Y. Watanabe and T. Mori
International Conference on high nitrogen steels, HNS88. 318 - 321 1989.04
Publishing type：Research paper (international conference proceedings)
-
Effect of a Magnetic Field on Martensitic Transformation of Antiferromagnetic Fe Particles in Single Crystals of a Cu-1.5wt%Fe Alloy Reviewed
Yoshimi Watanabe and Akikazu Sato
Scripta Metallurgica 23 359 - 362 1989.04
Authorship：Lead author Publishing type：Research paper (scientific journal)
DOI： 10.1016/0036-9748(89)90382-7
Other Link： http://www.sciencedirect.com/science/article/pii/0036974889903827
-
Octahedral Defects in a b.c.c. Lattice Examined by Lattice Theory Reviewed International coauthorship International journal
A. Sato, Y. Watanabe and T. Mura
Journal of Physics and Chemistry of Solids 49 529 - 540 1988.04
Language：English Publishing type：Research paper (scientific journal)
DOI： 10.1016/0022-3697(88)90064-9
Other Link： http://www.sciencedirect.com/science/article/pii/0022369788900649
PREV - NEXT 