Papers - WATANABE Yoshimi

Division display  301 - 320 of about 379 /  All the affair displays >>
  • Experimental Study on Particle Motions in Functionally Graded Materials by Centrifugal Method

    Satoyuki Tanaka, Shuichi Torii, Toshiaki Yano and Yoshimi Watanabe

    Progress in Transport Phenomena (Proc. of The 13th International Symposium on Transport Phenomena)   203 - 206   2002.04

     More details

    Publishing type:Research paper (international conference proceedings)  

  • Evaluation of Fiber Orientation in Ferromagnetic Short-Fiber Composites by Magnetic Anisotropy Reviewed International journal

    Yoshimi Watanabe

    Journal of Composite Materials   36 ( 8 )   915 - 923   2002.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)  

    DOI: 10.1177/0021998302036008514

  • Evaluation of Casting Textures in Al/Al3Ti Platelet Functionally Graded Materials Fabricated by a Centrifugal Method Reviewed International journal

    Yoshimi Watanabe, Hiroyuki Eryu, Tetsuya Yamamoto, Sutandyo Andiarwanto and Hiromi Miura

    Materials Science Forum   408-412   1771 - 1776   2002.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)  

    DOI: 10.4028/www.scientific.net/MSF.408-412.1771

  • Development of in-situ Cu-Fe based Magnetically Graded Composite by the Centrifugal Casting

    Yoshihiro Oya-Seimiya, Tetsumori Shinoda and Yoshimi Watanabe

    Proceedings of Ninth Annual International Conference on Composites Engineering (ICCE/9)   583 - 584   2002.04

     More details

    Publishing type:Research paper (international conference proceedings)  

  • CT法を用いた磁気的傾斜機能材料の非破壊評価 Reviewed

    渡辺義見,酒井博詞,中島隆行

    傾斜機能材料論文集   15   61 - 66   2002.04

     More details

    Publishing type:Research paper (scientific journal)  

  • Physical Properties of Ferromagnetic PVA Fiber fabricated by Wet-spinning Method Reviewed

    Hai Lin, Koichi Matsuda, Yoshimi Watanabe, Mutsumi Kimura and Hirofusa Shirai

    Trans. Mater. Res. Soc. Jpn   26   275 - 278   2001.04

     More details

    Publishing type:Research paper (scientific journal)  

  • Particle Size Distributions in in-situ Al-Al3Ni FGMs Fabricated by Centrifugal in-situ Method Reviewed

    Koichi Matsuda, Yoshimi Watanabe and Yasuyoshi Fukui

    Ceramic Trans.   114   491 - 498   2001.04

     More details

    Publishing type:Research paper (scientific journal)  

  • Particle Size Distributions in Al-Al3Ni Functionally Graded Materials Fabricated by a Semisolid Forming

    Koichi Matsuda, Yoshimi Watanabe, Kazuhisa Yamagiwa and Yasuyoshi Fukui

    Proceedings of 7th Japan International SAMPE Symposium   681 - 684   2001.04

     More details

    Publishing type:Research paper (international conference proceedings)  

  • Observation of Magnetic Gradients in Stainless Steel with a High-Tc Superconducting Quantum Interference Device Microscope Reviewed International coauthorship International journal

    Yoshimi Watanabe, S. H. Kang, J. W. Chan, J. W. Morris, Jr., T. J. Shaw and John Clarke

    Journal of Applied Physics   89   1977 - 1982   2001.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)  

    DOI: 10.1063/1.1334637

  • New Fabrication Method for 3-D Photonic Crystals by Application of Textile Technology - Cotton Yarn / TiO2 Dispersed Resin System -

    Y. Watanabe, T. Kobayashi, S. Kirihara and Y. Miyamoto

    The 6th Asian Textile Conference, Proceedings   ( 252 )   1 - 8   2001.04

     More details

    Publishing type:Research paper (other academic)  

  • Microstructures and Wear Resistances of Hybrid Al - (Al_3_Ti + Al_3_Ni) FGMs by Centrifugal Method Reviewed

    Intermetallics   9   33 - 43   2001.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)  

    DOI: 10.1016/S0966-9795(00)00086-8

  • Microstructural Changes in an Al-Al3Ti Composite by Equal Channel Angular Extrusion

    Shigemitu Hosoda and Yoshimi Watanabe

    Proceedings of 7th Japan International SAMPE Symposium   673 - 676   2001.04

     More details

    Publishing type:Research paper (international conference proceedings)  

  • Micro-hardness Measurements to Evaluate Composition Gradient by in Metal-Based Functionally Graded Materials Reviewed

    Yoshimi Watanabe, Noboru Yamanaka, Yoshihiro Oya-Seimiya and Yasuyoshi Fukui

    Z. Metallkd.   92   53 - 57   2001.04

     More details

    Publishing type:Research paper (scientific journal)  

  • Magnetic Polyvinyl Alcohol Materials Containing Magnetite Nanoparticles

    H. Lin, K. Matsuda, Y. Watanabe, M. Kimura, K. Hanabusa and H. Shirai

    The 6th Asian Textile Conference, Proceedings   ( 238 )   1 - 6   2001.04

     More details

    Publishing type:Research paper (international conference proceedings)  

  • Improvements of Mechanical Properties by Shape Memory Effect in Fe-Mn-Si-Cr Fiber / Plaster Composites Reviewed

    Eiichi Miyazaki and Yoshimi Watanabe

    Proceedings of PRICM4   1635 - 1638   2001.04

     More details

    Publishing type:Research paper (international conference proceedings)  

  • Growth Kinetics of Al3Ni Primary Crystal Particles in an Al-20mass%Ni Alloy Reviewed

    Koichi Matsuda, Yoshimi Watanabe and Masaharu Kato

    Trans. Mater. Res. Soc. Jpn   26   279 - 282   2001.04

     More details

    Publishing type:Research paper (scientific journal)  

  • Formation of Non-equilibrium Phase by Wear Test of Al-Ti Alloy Reviewed

    Kazuyuki Yokoyama and Yoshimi Watanabe

    Trans. Mater. Res. Soc. Jpn   26   303 - 306   2001.04

     More details

    Publishing type:Research paper (scientific journal)  

  • Fabrication of Nickel-aluminides by Reactive Centrifugal Casting Method from Liquid Aluminum and Solid Nickel Reviewed

    Satoru Watanabe, Yoshimi Watanabe and Kiyotaka Matsuura

    Proceedings of PRICM4   1951 - 1954   2001.04

     More details

    Publishing type:Research paper (international conference proceedings)  

  • Fabrication of Magnetically Graded Material by Compression Deformation of Wedge-shaped Ni3Al Intermetallic Compound Reviewed

    Yusuke Fukada, Yoshimi Watanabe and Hideki Hosoda

    Trans. Mater. Res. Soc. Jpn   26   239 - 242   2001.04

     More details

    Publishing type:Research paper (scientific journal)  

  • Evaluation of Three-Dimensional Orientation of Al3Ti Platelet in Al based FGMs Fabricated by a Centrifugal Casting Technique Reviewed

    Yoshimi Watanabe, Hiroyuki Eryu and Kiyotaka Matsuura

    Acta Mater.   49   775 - 783   2001.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)  

    DOI: 10.1016/S1359-6454(00)00384-0

    Other Link: http://www.sciencedirect.com/science/article/pii/S1359645400003840

To the head of this page.▲