WATANABE Yoshimi

写真a

Affiliation Department

Department of Physical Science and Engineering
Department of Physical Science and Engineering

Title

Professor

External Link

Degree

  • Doctor of Engineering ( Tokyo Institute of Technology )

Research Areas

  • Nanotechnology/Materials / Material processing and microstructure control

  • Nanotechnology/Materials / Composite materials and interfaces

  • Nanotechnology/Materials / Metallic material properties

  • Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Manufacturing and production engineering

From School

  • Nagoya Institute of Technology   Faculty of Engineering   Graduated

    - 1985.03

      More details

    Country:Japan

From Graduate School

  • Tokyo Institute of Technology   Graduate School, Division of Integrated Science and Engineering   Doctor's Course   Completed

    - 1990.03

      More details

    Country:Japan

  • Tokyo Institute of Technology   Graduate School, Division of Integrated Science and Engineering   Master's Course

    - 1987.03

      More details

    Country:Japan

External Career

  • 信州大学繊維学部   助教授

    1995.04 - 2005.03

      More details

    Country:Japan

  • 鹿児島大学工学部   助手

    1990.04 - 1992.03

      More details

    Country:Japan

  • University of California, Berkeley

    1997.06 - 1998.05

      More details

    Country:United States

  • 北海道大学工学部   助手

    1992.04 - 1995.03

      More details

    Country:Japan

Professional Memberships

  • 日本金属学会

    1987.04

  • 日本鋳造工学会

    2010.04

  • 日本機械学会

  • 日本鉄鋼協会

  • 軽金属学会

display all >>

 

Research Career

  • レーザ3Dプリンタ用金属粉末の開発

    Cooperative Research  

    Project Year: 2016.10

  • CFRPの穴開け加工

    The Other Research Programs  

    Project Year: 2008.09

  • Biodegradable Fiber Reinforced Composite Fabricated by Spark Plasma Sintering Method

    (not selected)  

    Project Year: 2004.04

  • Measuring the Wear Volume of Bag-Filter by Ash Dus

    (not selected)  

    Project Year: 2002.04

  • Intermetallic Fiber / Metal Matrix Composite by Reaction at Narrow Holes Method

    (not selected)  

    Project Year: 2002.04

display all >>

Papers

  • 遠心焼結鋳造法によるAl-(Al3Ti+Diamond)傾斜機能砥石の作製

    渡辺義見,伊沢泰彦,山田素子,佐藤尚,國峯崇裕,柘植英明

    日本複合材料学会誌   49 ( 4 )   2023.07

     More details

    Authorship:Lead author, Corresponding author   Language:Japanese   Publishing type:Research paper (scientific journal)  

  • Atypical Phase Transformation Behavior of Fe-33%Ni Alloys Induced by Shot Peening Reviewed International journal

    Hisashi Sato, Takayuki Nishiura, Tomokazu Moritani and Yoshimi Watanabe

    Surface & Coatings Technology   462   129470 (11 pages)   2023.06

     More details

    Authorship:Last author   Language:English   Publishing type:Research paper (scientific journal)  

    DOI: 10.1016/j.surfcoat.2023.129470

  • AZ80 マグネシウム合金 /A6005C アルミニウム合金爆発圧着材の接合界面組織および機械的性質に及ぼす焼鈍処理の影響 Reviewed

    成田麻未,淺井康之介,森久史,斎藤尚文,千野靖正,佐藤尚,渡辺義見

    溶接学会論文集   41 ( 1 )   107 - 115   2023.02

     More details

    Authorship:Last author   Language:Japanese   Publishing type:Research paper (scientific journal)  

    DOI: 10.2207/qjjws.41.107

  • Crystallographic Texture of Pure Cu Formed by Shot-Peening and Its Application Reviewed International journal

    Hisashi Sato, Yuya Ito, Golap Kalita and Yoshimi Watanabe

    Physica Status Solidi B   259 ( 9 )   2100550 (10 pages)   2022.09

     More details

    Language:English   Publishing type:Research paper (scientific journal)   Publisher:Wiley-VCH GmbH  

    DOI: 10.1002/pssb.202100550

  • Effects of Strain-Induced Cyclic Transformation on Microstructure Around Peened Surface of SUS304 Austenitic Stainless Steel Reviewed International journal

    Yuji Nakagawara, Hisashi Sato, Tomokazu Moritani, Yoshimi Watanabe

    Physica Status Solidi B   259 ( 9 )   2100603 (6 pages)   2022.09

     More details

    Language:English   Publishing type:Research paper (scientific journal)   Publisher:Wiley-VCH GmbH  

    DOI: 10.1002/pssb.202100603

  • Thermal Stability of L12 Modified Al2.5Cu0.5Ti Particles in Al Matrix Reviewed International journal

    Manasi Shrikrishna Yadav, Yoshimi Watanabe and Hisashi Sato

    Physica Status Solidi B   259 ( 9 )   2100603 (7 pages)   2022.09

     More details

    Language:English   Publishing type:Research paper (scientific journal)   Publisher:Wiley-VCH GmbH  

    DOI: 10.1002/pssb.202100659

  • マグネシウム合金 /アルミニウム合金爆着クラッド材における界面の金属組織の特徴 Reviewed

    成田麻未,森久史,佐藤尚,渡辺義見,斎藤尚文,千野靖正,花野嘉紀,山田吉徳,箕田正,田中宏樹

    軽金属溶接   60 ( 7 )   288 - 295   2022.07

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)  

  • Microstructural Control of Selective Laser Melted SUS316L Stainless Steel Based on Heterogeneous Nucleation Theory Reviewed International journal

    Yoshimi Watanabe, Tomoki Yuasa, Hisashi Sato, Satoshi Okubo and Kengo Fujimaki

    Journal of Materials Processing Technology   308 ( 117700 )   1 - 14   2022.07

     More details

    Authorship:Lead author   Language:English   Publishing type:Research paper (scientific journal)   Publisher:Elsevier  

    DOI: 10.1016/j.jmatprotec.2022.117700

  • マグネシウム/アルミニウム合金爆発圧着材の界面組織,耐食性および機械的性質に及ぼすマグネシウム合金組成の影響 Reviewed

    淺井康之介,成田麻未,佐藤尚,渡辺義見,森久史,斎藤尚文,中津川勲,千野靖正

    軽金属   72 ( 5 )   255 - 264   2022.05

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)  

    DOI: 10.2464/jilm.72.255

  • TiCヘテロ凝固核粒子添加による純アルミニウム積層造形体の組織微細化 Invited Reviewed

    渡辺義見,菅野浩行,知場三周,佐藤尚,佐藤直子,中野禅

    軽金属   72 ( 5 )   198 - 205   2022.05

     More details

    Authorship:Lead author   Language:Japanese   Publishing type:Research paper (scientific journal)  

    DOI: 10.2464/jilm.72.198

display all >>

Books and Other Publications

  • 3Dプリンタ用材料開発と造形物の高精度化

    渡辺義見( Role: Contributor ,  ヘテロ凝固機構により高造形性・高強度を実現する3Dプリンティング用金属粉末)

    株式会社 技術情報協会  2020.05  ( ISBN:978-4-86104-793-0

     More details

    Responsible for pages:59-67   Language:jpn   Book type:Scholarly book

  • Encyclopedia of Aluminum and Its Alloys

    Yoshimi Watanabe and Hisashi Sato( Role: Joint author ,  Grain Refinement of Cast Aluminum by Heterogeneous Nucleation Sites)

    Taylor & Francis  2018.11  ( ISBN:9781466510807

     More details

    Language:eng   Book type:Scholarly book

    Other Link: https://www.amazon.com/Encyclopedia-Aluminum-Alloys-Metals-Collection/dp/1466510803

  • 産業用3Dプリンターの最新技術と材料開発

    渡辺義見( Role: Contributor ,  3Dプリンター用金属粉末の内部欠陥抑制)

    株式会社 技術情報協会  2018.06 

     More details

    Responsible for pages:64-72   Language:jpn   Book type:Scholarly book

  • 異種材料の接着・接合技術とマルチマテリアル化

    渡辺義見,佐藤尚( Role: Contributor ,  傾斜機能材料を利用した金属/セラミックスの接合技術)

    株式会社 技術情報協会  2017.10 

     More details

    Responsible for pages:399-405   Language:jpn   Book type:Scholarly book

  • Advances in Functionally Graded Materials and Structure

    Takahiro Kunimine, Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe( Role: Joint author ,  Chapter 2 New Processing Routes for Functionally Graded Materials and Structures through a Combination of Powder Metallurgy and Casting)

    InTech - Open Access Publisher  2016.03  ( ISBN:978-953-51-2274-6

     More details

    Responsible for pages:33-48   Language:eng   Book type:Scholarly book

    Chapter 2 New Processing Routes for Functionally Graded Materials and Structures through a Combination of Powder Metallurgy and Casting

  • Advances in Metallic Biomaterials Technology, Processing and Applications

    Yoshimi Watanabe, Hisashi Sato and Eri Miura-Fujiwara( Role: Joint author)

    Springer   2015.07 

     More details

    Language:eng   Book type:Scholarly book

  • CFRPの成形・加工・リサイクル技術最前線 -生活用具から産業用途まで適用拡大を背景として-

    渡辺義見,佐藤尚( Role: Joint author ,  "第2章, 第3節. 傾斜機能材料を用いたCFRPの穴あけ加工技術")

    株式会社 エヌ・ティー・エス  2015.06 

     More details

    Language:jpn   Book type:Scholarly book

  • 図解 傾斜機能材料の基礎と応用

    上村誠一,渡辺義見( Role: Joint author ,  "2章. 金属およびセラミックス系傾斜機能材料の製造法","4 章. 遠心力を用いた傾斜機能材料製造法")

    コロナ社  2014.05 

     More details

    Language:jpn   Book type:Textbook, survey, introduction

  • Nanocomposites with Unique Properties and Applications in Medicine and Industry

    ( Role: Joint author)

    2011.08  ( ISBN:978-953-307-351-4

     More details

    Language:eng   Book type:Scholarly book

  • 新版 複合材料・技術総覧

    渡辺義見( Role: Joint author ,  第7章複合材料の将来,第2節金属系複合材料,2.2.3傾斜機能法)

    産業技術サービスセンター  2011.06 

     More details

    Language:jpn   Book type:Dictionary, encyclopedia

display all >>

Misc

  • Grain Refinement of Cast Aluminum by Heterogeneous Nucleation Site Particles with High Lattice Matching Invited Reviewed

    Yoshimi Watanabe, Mami Mihara-Narita and Hisashi Sato

    Materials Transactions   64 ( 6 )   1083 - 1097   2023.06

     More details

    Authorship:Lead author, Corresponding author   Language:Japanese  

    DOI: 10.2320/matertrans.MT-L2022026

  • ヘテロ凝固理論に基づく積層造形用ステンレス鋼粉末の開発 Invited

    渡辺義見,湯浅友暉,佐藤尚,大久保智,藤巻研吾

    43 ( 5 )   37 - 45   2023.05

     More details

    Authorship:Lead author, Corresponding author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)  

  • 金属積層造形の将来と革新的金属粉末の開発 -ヘテロ凝固核粒子を添加した新規金属積層造形用金属粉末- Invited

    渡辺義見

    13 ( 1 )   8 - 14   2023.01

     More details

    Authorship:Lead author, Corresponding author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)  

  • チーズをついに見つけた!? ~「チタンはどこへ消えた?」私の一枚(2017)その後~ Invited

    渡辺義見

    73 ( 1 )   48 - 48   2023.01

     More details

    Authorship:Lead author   Language:Japanese   Publisher:軽金属学会  

  • 軽金属と共に生きる Invited

    渡辺義見

    71 ( 11 )   527 - 527   2021.11

     More details

    Authorship:Lead author   Language:Japanese   Publisher:軽金属学会  

  • 名古屋工業大学 物理工学専攻材料機能分野 渡辺・佐藤研究室における産学連携の取り組み Invited

    渡辺義見

    62 ( 3 )   65 - 70   2021.03

     More details

    Authorship:Lead author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)  

  • チタン合金積層造形体の内部空孔形成に及ぼすTiCヘテロ凝固核粒子の影響 Invited

    渡辺義見,佐藤尚,佐藤直子,中野禅,鈴木進補

    68 ( 3 )   250 - 256   2020.07

     More details

    Authorship:Lead author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Publisher:日本チタン協会  

  • 名古屋工業大学における産学連携の紹介 Invited

    渡辺義見,江龍修

    61 ( 3 )   58 - 59   2020.03

     More details

    Authorship:Lead author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)  

  • 積層造形の組織,機械的性質及び造形性に及ぼすTi-6Al-4V合金粉末へのTiCヘテロ凝固核粒子添加の影響 Invited Reviewed

    渡辺義見,佐藤雅史,知場三周,佐藤尚,佐藤直子,中野禅,鈴木進補

    91 ( 9 )   634 - 640   2019.09

     More details

    Authorship:Lead author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)  

  • ヘテロ凝固核粒子添加による金属の組織制御と3Dプリンティングへの応用 Invited

    渡辺義見

    69 ( 19 )   13 - 19   2019.08

     More details

    Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Publisher:日本計量振興協会  

display all >>

Presentations

  • アルミニウムにおけるα-AlFeSi晶出物の球状化に及ぼす鋳造条件の影響

    成田麻未,佐藤有真,佐藤尚,渡辺義見,本居徹也,吉田英雄

    日本鋳造工学会 2023年度春期大会(第181回全国講演大会)  2023.05 

     More details

    Event date: 2023.05

    Language:Japanese   Presentation type:Oral presentation (general)  

    Venue:近畿大学東大阪キャンパス   Country:Japan  

  • 種々の焼入れ条件がAl-Zn-Mg合金のナノ組織と時効硬化挙動に及ぼす影響

    成田麻未,松本空良,佐藤尚,渡辺義見

    軽金属学会 第144回春期大会  2023.05 

     More details

    Event date: 2023.05

    Language:Japanese   Presentation type:Oral presentation (general)  

    Venue:香川大学  

  • 熱間圧延を施した Mg/Al 合金爆着材の特性評価

    成田麻未,淺井康之介,佐藤尚,渡辺義見,Bian Mingzhe,森久史,千野靖正

    2023 年度 溶接学会春季全国大会  2023.04 

     More details

    Event date: 2023.04 - 2023.05

    Language:Japanese   Presentation type:Oral presentation (general)  

    Venue:オンデマンド開催  

  • Temperature dependence for formation of nanocrystallized layer in pure Cu by sliding wear International conference

    Hisashi Sato, Hiroyuki Hayashi, Motoko Yamada and Yoshimi Watanabe

    24th International Conference on Wear of Materials 

     More details

    Event date: 2023.04

    Language:English   Presentation type:Poster presentation  

    Country:Canada  

  • ショットピーニングと熱処理を施した純Feの結晶学的集合組織と磁気特性

    佐藤尚,本塚智,渡辺義見

    日本鉄鋼協会 2023年春季(第185回)  2023.03 

     More details

    Event date: 2023.03

    Language:Japanese   Presentation type:Oral presentation (general)  

    Venue:東京大学 駒場Ⅰキャンパス  

  • ヘテロ凝固核粒子添加による鋳造組織と積層造形組織の制御 Invited

    渡辺義見

    日本鋳造工学会東海支部 第101回 鋳造先端プロセス研究部会  2022.12 

     More details

    Event date: 2022.12

    Language:Japanese   Presentation type:Oral presentation (invited, special)  

    Venue:ウインクあいち  

  • 徐冷焼入れに伴うAl-Zn-Mg合金のナノ組織形成と時効硬化挙動

    松本空良,成田麻未,佐藤尚,渡辺義見

    軽金属学会 第143回秋期大会  2022.11 

     More details

    Event date: 2022.11

    Language:Japanese   Presentation type:Poster presentation  

    Venue:東京工業大学 大岡山キャンパス  

  • 指向性エネルギー堆積法により製造したアルミニウムおよびチタン合金造形体の超高速衝撃変形挙動

    Su Ziyi, 西田政弘, 渡辺義見

    軽金属学会 第143回秋期大会  2022.11 

     More details

    Event date: 2022.11

    Language:Japanese   Presentation type:Oral presentation (general)  

    Venue:東京工業大学 大岡山キャンパス  

  • 合金組成を変化させたマグネシウム合金/アルミニウム合金爆着材における接合強度と界面組織

    淺井康之介,成田麻未,佐藤尚,渡辺義見,森久史,斎藤尚文,千野靖正

    軽金属学会 第143回秋期大会  2022.11 

     More details

    Event date: 2022.11

    Language:Japanese   Presentation type:Oral presentation (general)  

    Venue:東京工業大学 大岡山キャンパス  

  • TiCヘテロ凝固核粒子を添加したTi-6Al-4V合金積層造形体の組織と強度

    渡辺義見,山田真太郎,知場三周,佐藤尚,阿部憲士郎,加藤智紹

    軽金属学会 第143回秋期大会  2022.11 

     More details

    Event date: 2022.11

    Language:Japanese   Presentation type:Oral presentation (general)  

    Venue:東京工業大学 大岡山キャンパス  

display all >>

Industrial Property Rights

  • Crystal Grain Refining Agent for Casting and Mehod for Producing the Same

     More details

    Application no:12738824.7  Date applied:2012.01

    Patent/Registration no:2669028  Date registered:2019.07  Date issued:2019.07

    Country of applicant:Foreign country   Country of acquisition:Foreign country

  • 積層造形用材料及びそれを用いた積層造形体の製造方法

    渡辺義見,佐藤尚,湯浅友暉,大久保智

     More details

    Applicant:国立大学法人 名古屋工業大学,地方独立行政法人 東京都立産業技術研究センター

    Application no:2021-060497  Date applied:2021.03

    Announcement no:2022-156686  Date announced:2022.10

    Country of applicant:Domestic   Country of acquisition:Domestic

  • 面内無方向性電磁金属板及びその製造方法

    佐藤尚,渡辺義見,石黒雄大,伊藤祐哉,本塚智

     More details

    Applicant:国立大学法人名古屋工業大学,国立大学法人九州工業大学

    Application no:2020-181654  Date applied:2020.10

    Announcement no:2021-077878  Date announced:2021.05

    Country of applicant:Domestic   Country of acquisition:Domestic

  • 制振合金およびその製造方法

    川崎由康,中垣内達也,横田毅,船川義正,佐藤尚,小輪瀬詞也,渡辺義見

     More details

    Applicant:JEFスチール株式会社,国立大学法人名古屋工業大学

    Application no:2020-180929  Date applied:2020.10

    Announcement no:2022-071774  Date announced:2022.05

    Country of applicant:Domestic   Country of acquisition:Domestic

  • 異質核粒子を含有した3次元積層造形用粉末、それを用いた造形体および その造形体の製造方法

    渡辺義見,知場三周,佐藤尚,佐藤雅史,菅野浩行,中野禅,佐藤直子

     More details

    Application no:特願2017-213504  Date applied:2017.11

    Announcement no: 2019-085604  Date announced:2019.06

    Patent/Registration no:6997984  Date registered:2021.12  Date issued:2021.12

    Country of applicant:Domestic   Country of acquisition:Domestic

  • 高濃度に異質核粒子を含有した鋳造用結晶粒微細化剤およびその製造方法

    渡辺義見,佐藤尚,谷合秀介

     More details

    Application no:特願2017-160087  Date applied:2017.08

    Announcement no:2019-037992  Date announced:2019.03

    Patent/Registration no:6955254  Date registered:2021.10  Date issued:2021.10

    Country of applicant:Domestic   Country of acquisition:Domestic

  • 積層造形用金属粉末および金属粉末を用いた積層造形体

    渡辺義見,佐藤尚,佐藤雅史,中野禅,佐藤直子,清水透

     More details

    Applicant:国立大学法人名古屋工業大学,国立研究開発法人産業技術総合研究所

    Application no:特願2016-118501  Date applied:2016.06

    Patent/Registration no:6819952  Date registered:2021.01  Date issued:2021.01

    Country of applicant:Domestic   Country of acquisition:Domestic

  • 金属とセラミックスの接合法および金属とセラミックスの接合体

    渡辺義見,佐藤尚,村瀬匡紀,塚本英明

     More details

    Applicant:国立大学法人名古屋工業大学

    Application no:特願2016- 8656  Date applied:2016.01

    Patent/Registration no:6679101  Date registered:2020.03  Date issued:2020.03

    Country of applicant:Domestic   Country of acquisition:Domestic

  • 強度および摩擦摩耗特性に優れた金属基自己潤滑複合材料およびその製造方法

    佐藤尚,茅野智昭,山田素子,渡辺義見

     More details

    Applicant:国立大学法人名古屋工業大学

    Application no:特願2014-240928  Date applied:2014.11

    Country of applicant:Domestic   Country of acquisition:Domestic

  • 金属間化合物粒子の製造方法、これを利用した鋳造アルミニウム用結晶粒微細化剤およびその製造方法、これらを利用したアルミニウムあるいはアルミニウム合金鋳造材の製造方法

    渡辺義見, 佐藤尚,浜田貴行

     More details

    Applicant:国立大学法人名古屋工業大学

    Application no:特願2014-229371  Date applied:2014.11

    Country of applicant:Domestic   Country of acquisition:Domestic

display all >>

Other research activities

  • 公益財団法人 天田財団 2022 度重点研究開発助成 課題研究

    2022.10 - 2026.03

     More details

    ヘテロ凝固核添加によるレーザ式指向性エネルギー堆積法の高精度プロセッシング

  • 令和3年度 技術シーズ移転・実証事業費補助金(岐阜県)

    2021.06 - 2022.02

     More details

    航空機構造部品加工により排出される超々ジュラルミンのダライ粉を用いたリサイクル技術の実証事業

  • 新あいち創造研究開発補助金

    2017.07 - 2018.03

     More details

    低ヤング率型チタン合金製歯科矯正ワイヤの大気圧プラズマ照射による白色化処理技術の研究開発

  • 科学技術振興機構(JST) 産学共創基礎基盤研究プログラム

    2016.10 - 2020.03

     More details

    ヘテロ凝固機構により高造形性・高強度を実現する積層造形用金属粉末の開発

  • 国立研究開発法人新エネルギー・産業技術総合開発機構 (NEDO) 「中堅・中小企業への橋渡し研究開発促進事業」

    2016.07 - 2017.12

     More details

    アルミ合金鋳物用革新的組織微細化剤の創製と生産プロセス開発

  • 平成25年度補正「中小企業・小規模事業者ものづくり・商業・サービス革新事業」

    2013 - 2014

     More details

    鋳造アルミ合金用結晶粒微細化剤の事業化に向けた試作開発

  • 独立行政法人 科学技術振興機構 復興促進プログラム

    2012.10 - 2013.09

     More details

    革新的鋳造アルミ合金用結晶粒微細化剤製造装置の開発

  • 平成24年度ものづくり中小企業・小規模事業者試作開発等支援補助金

    2012 - 2013

     More details

    切削屑を添加した遠心鋳造材の試作開発

  • 地域イノベーション戦略支援プログラム

    2011.09 - 2016.03

     More details

    ぎふ技術革新プログラム推進地域

  • 軽金属奨学会 平成23年度課題研究

    2011 - 2013.03

     More details

    界面エネルギーを考慮した新規微細粒鋳造材の開発

display all >>

Awards

  • 令和4年度軽金属論文賞

    2022.11   軽金属学会   TiCヘテロ凝固核粒子添加による工業用純アルミニウム積層造形体の組織微細化

    渡辺義見,菅野浩行,知場三周,佐藤尚,佐藤直子,中野禅

     More details

    Award type:Honored in official journal of a scientific society, scientific journal  Country:Japan

  • 日本鋳造工学会東海支部功績賞

    2022.04   日本鋳造工学会東海支部   ヘテロ凝固理論を応用した組織制御や遠心鋳造による高機能鋳造材の開発

    渡辺義見

     More details

    Award type:International academic award (Japan or overseas)  Country:Japan

  • Best Poster Presentation Award

    2019.03  

     More details

    Award type:Award from international society, conference, symposium, etc.  Country:Japan

  • 日本機械学会機械材料・材料加工部門一般表彰(新技術開発部門)

    2016.09   日本機械学会   遠心力混合粉末法を用いて作製したAl基cBN傾斜機能砥石によるCFRPの穴あけ加工

    杉浦貴泰,鈴木優太,山田素子,佐藤尚,渡辺義見,柘植英明

     More details

    Award type:Award from Japanese society, conference, symposium, etc.  Country:Japan

  • 軽金属学会第14回軽金属功績賞

    2016.05   軽金属学会  

    渡辺義見

     More details

    Award type:Award from Japanese society, conference, symposium, etc.  Country:Japan

  • Best Poster Presentation Award

    2013.02  

    Hideaki Tsukamoto, Yoshiki Komiya, Hisashi Sato and Yoshimi Watanabe

     More details

    Award type:Award from international society, conference, symposium, etc.  Country:Japan

  • 日本機械学会機械材料・材料加工部門一般表彰(新技術開発部門)

    2011.09   日本機械学会機械材料・材料加工部門  

    大矢泰正,渡辺義見,佐藤尚,三浦永理

     More details

    Country:Japan

  • 財団法人永井科学技術財団第21回永井賞

    2010.03   財団法人永井科学技術財団  

    遠心力混合粉末法を用いた銅合金軸受保持器の実用化

     More details

    Award type:Award from publisher, newspaper, foundation, etc.  Country:Japan

  • 日本鉄鋼協会澤村論文賞

    2010.03   日本鉄鋼協会  

    Hisashi Sato, Stefan Zaefferer and Yoshimi Watanabe

     More details

    Award type:Honored in official journal of a scientific society, scientific journal  Country:Japan

  • 日本鉄鋼協会学術記念賞(西山記念賞)

    2009.03   日本鉄鋼協会  

    渡辺義見

     More details

    Country:Japan

display all >>

Scientific Research Funds Acquisition Results

  • SmFe12バルク磁性材料の創出による機能性材料におけるヘテロ凝固理論の確立

    2021.04 - 2024.03

    科学研究費補助金  基盤研究(C)

    渡辺義見

  • Al-Ti系微細化剤中のAl3Tiヘテロ凝固核の形状変化に基づく微細化能向上

    2017.04 - 2020.03

    科学研究費補助金  基盤研究(C)

    渡辺義見

Other External Funds

  • ヘテロ凝固核添加によるレーザ式指向性エネルギー堆積法の高精度プロセッシング

    2022.10 - 2026.03

    公益財団法人 天田財団  2022 度重点研究開発助成 課題研究 

    渡辺義見

      More details

    Authorship:Principal investigator  Grant type:Competitive

    Grant amount:\10000000

  • 巨大ひずみ加工によるアルミニウム粉末の固化技術の開発と微細化剤製造への応用

    2021.04 - 2023.03

    軽金属奨学会  軽金属奨学会教育研究資金 

    渡辺義見

      More details

    Grant type:Competitive

Past of Cooperative Research

  • Nano粒子被膜を用いたCO2フリー水素発生技術と水素発生装置の研究開発

    2022.12 - 2023.03

    Collaboration in Japan 

    渡辺義見

      More details

    Authorship:Principal investigator  Grant type:Collaborative (industry/university)

    Grant amount:\1950000 ( Direct Cost: \1500000 、 Indirect Cost:\450000 )

  • 航空機構造部品加工により排出される超々ジュラルミンのダライ粉を用いたリサイクル技術の実証事業

    2021.05 - 2022.03

    徳田工業株式会社  Collaboration in Japan 

 

Committee Memberships

  • 日本鋳造工学会   東海支部理事  

    2022.04 - 2024.03   

      More details

    Committee type:Academic society

  • 日本鋳造工学会   2022年, 2023年度査読委員  

    2022.04 - 2024.03   

      More details

    Committee type:Academic society

  • 日本複合材料学会   第46回複合材料シンポジウム 実行委員会委員  

    2020.06 - 2021.10   

      More details

    Committee type:Academic society

  • 軽金属学会   東海支部・理事・評議員  

    2020.04   

      More details

    Committee type:Academic society

  • 日本複合材料学会   東海・北信越支部 商議員  

    2020.04 - 2025.03   

      More details

    Committee type:Academic society

  • 日本金属学会   会誌編集委員会・欧文誌編集委員会査読委員  

    2020.04 - 2022.04   

      More details

    Committee type:Academic society

  • 日本鋳造工学会   2020年, 2021年度査読委員  

    2020.04 - 2022.03   

      More details

    Committee type:Academic society

  • 日本複合材料学会   フェロー  

    2019.02   

      More details

    Committee type:Academic society

  • 日本鋳造工学会   第175回全国講演大会 実行委員  

    2018.09 - 2020.06   

      More details

    Committee type:Academic society

  • 軽金属学会   東海支部・支部長  

    2018.04 - 2020.04   

      More details

    Committee type:Academic society

display all >>

Social Activities

  • 日本機械鋸・刃物工業会、技術者教育講習会

    Role(s): Lecturer

    日本機械鋸・刃物工業会  2022.12

     More details

    Audience: Company

    Type:Lecture

  • 鋳鉄の組織とその特性

    Role(s): Lecturer

    日本鋳造工学会 東海支部  鋳鉄の基礎講座  2022.07

  • 日本機械鋸・刃物工業会、技術者教育講習会

    Role(s): Lecturer

    日本機械鋸・刃物工業会  2021.12

     More details

    Audience: Company

    Type:Lecture

  • 鋳鉄の組織とその特性

    Role(s): Lecturer

    日本鋳造工学会 東海支部  鋳鉄の基礎講座  2021.10

  • 日本機械鋸・刃物工業会、技術者教育講習会

    Role(s): Lecturer

    日本機械鋸・刃物工業会  2019.08

     More details

    Audience: Company

    Type:Lecture

  • 名古屋工業大学研究協力会 第41回技術懇話会

    Role(s): Lecturer

    金属×材料×加工 技術支援ネットワークによる基盤企業の技術力強化  2019.07

     More details

    Audience: Researchesrs, General, Company

    Type:Lecture

  • 金属系3Dプリンティングによるモノづくり・仕組みづくり

    Role(s): Lecturer

    ネクスト・イノベーション・テクノロジー2019  名古屋市,吹上ホール  2019.03

     More details

    Audience: Researchesrs, General, Company

    Type:Lecture

  • 学び直し「機械材料学」

    Role(s): Lecturer

    名古屋工業大学研究協力会  名工大レクチャーコース2  2018.11

     More details

    Audience: Teachers, Researchesrs, General, Company

    Type:Lecture

  • 傾斜機能材料実用化ワークショップ2018 in 金沢

    Role(s): Lecturer

    傾斜機能材料研究会  傾斜機能材料実用化ワークショップ2018 in 金沢  2018.11

     More details

    Audience: Researchesrs

    Type:Seminar, workshop

    FGMs技術総論と実用化の事例研究

  • 日本機械鋸・刃物工業会、技術者教育講習会

    Role(s): Lecturer

    日本機械鋸・刃物工業会  2018.08

     More details

    Audience: Company

    Type:Lecture

display all >>

Academic Activities

  • nanotech2016

    2016.01