Details of a Researcher

Papers - HONDA Sawao

Division display >> ／ All the affair displays 1 - 147 of about 147

In Situ Single-phase Formation of LaCl(CN2) Mixed-Anion Compound Via Controlled Pyrolysis of La3+ Modified Melamine Precursor Reviewed International coauthorship International journal

N. Asakuma, M. Iijima, T. Tamura, S. Honda, D. Urushihara, T. Asaka, S. Bernard, and Y. Iwamoto

Inorg. Chem. 2024 ( xx ) xxxx - xxxx 2024.10

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：American Chemical Society

DOI： doi.org/10.1021/acs.inorgchem.4c02605

Other Link： https://pubs.acs.org/doi/full/10.1021/acs.inorgchem.4c02605

Downshift of the Ni d band center over Ni nanoparticles in situ confined within an amorphous silicon nitride matrix Reviewed International coauthorship International journal

N. Asakuma, S. Tada, T. Tamura, E. Kawaguchi, S. Honda, T. Asaka, A. Bouzid, S. Bernard, and Y. Iwamoto

Dalton Trans. 2024 ( 53 ) 5686 - 5694 2024.05

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：Royal Society of Chemistry

DOI： 10.1039/d3dt04155g

Other Link： https://pubs.rsc.org/en/content/articlelanding/2024/dt/d3dt04155g

Performance of Ce:YAG-MgO composite ceramics as high-power LED phosphor densified by non-reactive sintering Reviewed International journal

A. Ikesue, Y. L. Aung, S. Honda and Y. Iwamoto

J. Euro. Ceram. Soc. 44 5235 - 5240 2024.03

Authorship：Last author Language：English Publishing type：Research paper (scientific journal) Publisher：ELSEVIER

DOI： doi.org/10.1016/j.jeurceramsoc.2024.02.056

Other Link： https://www.sciencedirect.com/science/article/pii/S0955221924002036?via%3Dihub

Thermal conductivity improvement in silicon nitride ceramics via grain purification Reviewed International journal

H. Imamura, Kazuhiro Kura, T. Kawata, S. Honda, Y. Iwamoto

Journal of the American Ceramic Society 2024 ( ２ ) 1189 - 1169 2024.02

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：WILEY

DOI： 10.1111/jace.19478

Other Link： https://ceramics.onlinelibrary.wiley.com/doi/10.1111/jace.19478

An in situ growth route towards anti-perovskite Ni₃InN nanoparticles embedded within amorphous silicon nitride Reviewed International coauthorship International journal

S. Tada, S. Takazawa, N. Asakuma, M. Cheype, S. Honda, R. Kumar, S. Bernard, and Y. Iwamoto

J. Mater. Chem. A 2024 ( 12 ) 3689 - 3699 2023.12

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：Royal Society of Chemistry

DOI： 10.1039/d3ta06212k

Other Link： https://pubs.rsc.org/en/content/articlelanding/2024/ta/d3ta06212k

Impurity oxygen-triggered α- → β-Si₃N₄ phase transformation at 1900 ºC Reviewed International journal

H. Imamura, Kazuhiro Kura, T. Kawata, S. Honda, Toru Asaka, Y. Iwamoto

Crystals 13 ( 11 ) 1572 - 1572 2023.11

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：WILEY

DOI： doi.org/10.3390/cryst13111572

Other Link： https://doi.org/10.3390/cryst13111572

Thermal conductivity improvement in silicon nitride ceramics via grain purification Reviewed International journal

H. Imamura, T. Kawata, S. Honda, Y. Iwamoto

Journal of the American Ceramic Society 2023.09

Language：English Publishing type：Research paper (scientific journal) Publisher：WILEY

DOI： doi.org/10.1111/jace.19478

Optical and mechanical properties characterizations of transparent polycrystalline MgAl₂O₄ spinel Reviewed International journal

Sawao Honda,Yuki Ogihara, Akio Ikesue,Yan Lin Aung, Shinobu Hashomoto,Yuji Iwamoto

Journal of Asian Ceramic Societies 2023.08

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1080/21870764.2023.2248714

Other Link： https://doi.org/10.1080/21870764.2023.2248714

A facile method to produce rod-like β-Si₃N₄ seed crystallites for bimodal structure controlling Reviewed International journal

H. Imamura, T. Kawata, S. Honda, Y. Iwamoto

Journal of the American Ceramic Society 106 ( 3 ) 1694 - 1705 2023.03

Language：English Publishing type：Research paper (scientific journal) Publisher：WILEY

DOI： https://doi.org/10.1111/jace.18893

Tunable white emission from scintillated zinc borosilicate doped with dysprosium oxide and incorporated with bio-silica from rice husk Reviewed International coauthorship International journal

R. A. A. Wahab, Md. H. Md. Zaid, K. A. Matori, H. Md. Kamar, A. R. Sarmani, Z. W. Loh, W. M. Cheong, S. Honda, Y. Iwamoto

International Journal for Light and Electron Optics (Optik) 270 ( 2022 ) 170082 - 170082 2022.11

Language：English Publishing type：Research paper (scientific journal) Publisher：ELSEVIER

DOI： https://doi.org/10.1016/j.ijleo.2022.170082

Other Link： https://www.sciencedirect.com/science/article/abs/pii/S0030402622013407?via%3Dihub

Polymer-derived β-SiAlON:Eu²⁺ phosphors Reviewed International coauthorship International journal

Y. Gao, J. Iihama, D. Hamana, R. Iwasaki, S. Honda, T. Asaka, M. Kumari, T. Hayakawa, S. Bernard, P. Thomas, Y. Iwamoto

Int. J. Appl. Ceram. Tech. 2022 1 - 12 2022.09

Language：English Publishing type：Research paper (scientific journal) Publisher：mdpi

DOI： https://doi.org/10.1111/ijac.14228

Other Link： https://ceramics.onlinelibrary.wiley.com/doi/10.1111/ijac.14228

In situ Raman spectroscopy analysis of local structure in dry gel for zeolite beta synthesis Reviewed

Sawao Honda, Yuma Matsuda, Kento Nakashima, Yusuke Daiko, Shinobu Hashimoto, Yuji Iwamoto

International Journal of Applied Ceramic Technology 20 ( 2 ) 1081 - 1089 2022.09

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1111/ijac.14215

Green emitting β-SiAlON:Eu²⁺ phosphors derived from chemically modified perhydropolysilazanes Reviewed International coauthorship International journal

Y, Gao, R. Iwasaki, D. Hamana, J. Iihama, S. Honda, M. Kumari, T. Hayakawa, S. Bernard, P. Thomas, Y. Iwamoto

Int. J. Appl. Ceram. Tech. 2022 1 - 13 2022.07

Language：English Publishing type：Research paper (scientific journal) Publisher：Wiley

DOI： https://doi.org/10.1111/ijac.14139

Other Link： https://ceramics.onlinelibrary.wiley.com/doi/full/10.1111/ijac.14139

Chemical route for synthesis of β-SiAlON:Eu²⁺ phosphors combining polymer-derived ceramics route with non-hydrolytic sol-gel chemistry Reviewed International coauthorship International journal

Y, Gao, D. Hamana, R. Iwasaki, J. Iihama, S. Honda, M. Kumari, T. Hayakawa, S. Bernard, P. Thomas, Y. Iwamoto

J. Sol-Gel Sci. Technol. 2022 1 - 13 2022.06

Language：English Publishing type：Research paper (scientific journal) Publisher：Springer

DOI： https://doi.org/10.1007/s10971-022-05879-w

Other Link： https://link.springer.com/article/10.1007/s10971-022-05879-w

Characterization of anisotropic gas permeability and thermomechanical properties of highly textured porous alumina Reviewed International coauthorship International journal

S. Honda, S. Hashimoto, B. Nait-Ali, D. S. Smith, Y. Daiko, Y. Iwamoto

Journal of the American Ceramic Society 105 ( 10 ) 6335 - 6344 2022.06

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1111/jace.18573

Mechanistic Investigation of the Formation of Nickel Nano-crystallites Embedded in Amorphous Silicon Nitride Nano-composites Reviewed International coauthorship International journal

N. Asakuma, S. Tada, E. Kawaguchi, M. Terashima, S. Honda, R. K. Nshihora, P. Carles, S. Bernard, and Y. Iwamoto

nanomaterials 12 1644 - 1644 2022.05

Language：English Publishing type：Research paper (scientific journal) Publisher：mdpi

DOI： https://doi.org/10.3390/nano12101644

Other Link： https://www.mdpi.com/2079-4991/12/10/1644

Gas permeation and thermomechanical properties for macroporous alumina focused on necking size at grain boundaries Reviewed International coauthorship International journal

S. Honda, P. Jia, Y. Daiko, S. Hashimoto, B. Nait-Ali, D. S. Smith, Y. Iwamoto

International Journal of Applied Ceramic Technology 19 ( 2 ) 828 - 837 2021.08

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1111/ijac.13860

Low temperature in situ formation of cobalt in silicon nitride toward functional nitride nanocomposites Reviewed International coauthorship

S. Tada, M.D. Mallmann, H. Takagi, J. Iihama, N. Asakuma, T. Asaka, Y. Daiko, S. Honda, R.K. Nishihora, R.A.F. Machado, S. Bernard and Y. Iwamoto

Chemical Communications 2021.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1039/d0cc07366k

Other Link： https://pubs.rsc.org/en/content/articlelanding/2021/cc/d0cc07366k#!divAbstract

Influence of Calcination Temperature on Crystal Growth and Optical Characteristics of Eu3+ Doped ZnO/Zn2SiO4 Composites Fabricated via Simple Thermal Treatment Method Reviewed International coauthorship

S.H. Jaafar, M.H.M. Zaid, K.A. Matori, S.H. A. Aziz, H.M. Kamari, S. Honda and Y. Iwamoto

Crystals 2021 ( 11 ) 115 - 115 2021.01

Language：English Publishing type：Research paper (scientific journal) Publisher：MDPI

DOI： 10.3390/cryst11020115

Other Link： https://www.mdpi.com/2073-4352/11/2/115

Hydrogen chemisorption properties of novel metal-free inorganic compound: exploring Lewis acid-base Al–N pair site formed in-situ within polymer-derived ceramics based on the silicon-aluminum-nitrogen-based system Reviewed International coauthorship

S. Tada, N. Asakuma, S. Ando, T. Asaka, Y. Daiko, S. Honda, M. Haneda, S. Bernard, R. Riedel and Y. Iwamoto

J. Mater. Chem. A 2020.12

Language：English Publishing type：Research paper (scientific journal)

Superhydrophobic polycarbosilane membranes for purification of solar hydrogen Reviewed International coauthorship International journal

Miwako Kubo, Kohei Okibayash, Misako Kojima, Ryota Mano, Yusuke Daiko, Sawao Honda, Samuel Bernard and Yuji Iwamoto

Sep. Purif. Technol 258 ( 1 ) 117998 - 117998 2020.11

Language：English Publishing type：Research paper (scientific journal)

DOI： doi.org/10.1016/j.seppur.2020.117998

Other Link： https://www.sciencedirect.com/science/article/pii/S1383586620324710?via%3Dihub

Reversible Redox Property of Co(III) in Amorphous Co-doped SiO2/γ-Al2O3 Layered Composites Reviewed International journal

S. Tada, S. Saito, A. Mori, H. Mizuno, S. Ando, T. Asaka, Y. Daiko, S. Honda, S. Bernard, and Y. Iwamoto

materials 2020.11

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.3390/ma13235345

Kinetic Analysis of Crystallization of Zeolite Beta Synthesized by Direct Heating Reviewed International journal

S. Honda, K. Nakashima, T. Yoshida, Y. Daiko, S. Hashimoto, Y. IwamotoO

104 ( 2 ) 1178 - 1187 2020.10

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1111/jace.17539

Hydrogen transport property of polymer-derived cobalt cation-doped amorphous silica Reviewed International coauthorship International journal

Shotaro Tada, Shiori Ando, Toru Asaka, Yusuke Daiko, Sawao Honda, Samuel Bernard and Yuji Iwamoto

Inorg. Chem. Front. 2020.10

Language：English Publishing type：Research paper (scientific journal)

DOI： doi. 10.1039/D0QI01035A

Other Link： https://pubs.rsc.org/en/content/articlehtml/2020/qi/d0qi01035a

Fluoride ion field emission from a ZBLAC glass emitter Reviewed International journal

Yusuke Daiko, Haruki Yanagida, Sawao Honda, Yuji Iwamoto

Solid State Ionics 353 115400 2020.10

Language：English Publishing type：Research paper (scientific journal) Publisher：ELSEVIER

フッ化物イオン伝導性ガラスにIn2O3を添加したときのF-イオン伝導度向上について，残存酸素量やガラス転移温度，ラマンシフトなどから考察しています．また当該ガラスを先鋭化して高電圧を印加することで，F-イオン放出と思われる挙動を初めて確認しました．

DOI： 10.1016/j.ssi.2020.115400

Other Link： https://www.sciencedirect.com/science/article/pii/S0167273820304549?via%3Dihub

Hydrogen selective SiCH inorganic-organic hybrid/gamma-Al₂O₃ composite membranes Reviewed International coauthorship International journal

Miwako Kubo, Ryota Mano, Misako Kojima, Kenichi Naniwa, Yusuke Daiko, Sawao Honda, Emanuel Ionescu, Samuel Bernard, Ralf Riedel and Yuji Iwamoto

Membranes 10 ( 10 ) 258 - 258 2020.09

Language：English Publishing type：Research paper (scientific journal)

DOI： doi:10.3390/membranes10100258

Other Link： https://www.mdpi.com/2077-0375/10/10/258

Crystal growth and mechanical properties of porous glass-ceramics derived from waste soda-lime-silica glass and clam shells Reviewed International coauthorship International journal

Noor Aizat Noor Hisham, Mohd Hafiz Mohd Zaid, Dur Iffa Saparuddin, Sidek Ab Aziz, Farah Diana Muhammad, Sawao Honda, Yuji Iwamoto

J. Mater. Res. Tech. 9 ( 4 ) 9295 - 9298 2020.07

Language：English Publishing type：Research paper (scientific journal)

DOI： doi.org/10.1016/j.jmrt.2020.06.009

Other Link： https://www.sciencedirect.com/science/article/pii/S2238785420314101

Effect of sintering temperature on the crystal growth, microstructure and mechanical strength offoam glass-ceramic from waste materials Reviewed International coauthorship International journal

Dur Iffa Saparuddin, Noor Aizat Noor Hisham, Sidek Ab Aziz, Khamirul Amin Matori, Sawao Honda, Yuji Iwamoto, Mohd Hafiz Mohd Zaid

J. Mater. Res. Tech. 9 ( 3 ) 5640 - 5647 2020.04

Language：English Publishing type：Research paper (scientific journal)

DOI： doi.org/10.1016/j.jmrt.2020.03.089

Other Link： https://www.sciencedirect.com/science/article/pii/S2238785420305640

Influence of the Natural Zeolite Particle Size Toward the Ammonia Adsorption Activity in Ceramic Hollow Fiber Membrane Reviewed International coauthorship International journal

Mohd Ridhwan Adam, Mohd Hafiz Dzarfan Othman, Siti Hamimah Sheikh Abdul Kadir, Mohd Nazri Mohd Sokri, Zhong Sheng Tai, Yuji Iwamoto, Masaki Tanemura, Sawao Honda, Mohd Hafiz Puteh, Mukhlis A. Rahman and Juhana Jaafar

Membranes 10 ( 4 ) 63 - 63 2020.04

Language：English Publishing type：Research paper (scientific journal)

DOI： doi.org/10.3390/membranes10040063

Other Link： https://www.mdpi.com/2077-0375/10/4/63

A hydrostable mesoporous gamma-Al2O3 membrane modified with Si–C–H organic-inorganic hybrid derived from polycarbosilane Reviewed

M. Kubo, M. Kojima, R. Mano, Y. Daiko, S. Honda, Y. Iwamoto

J. Membr. Sci. 598 1177799 2020.03

Language：English Publishing type：Research paper (scientific journal)

Other Link： https://doi.org/10.1007/s11581-020-03506-8

Fabrication of highly isotropic porous alumina refractory clinkers consisting of platelets using a gelatin-sol Reviewed

D. Muto, S. Hashimoto, H. Kondo, Y. Daiko, S. Honda, Y. Iwamoto

J. Asian Ceram. Soc 2020.02

Language：English Publishing type：Research paper (scientific journal)

Fabrication and characterization of a novel lightweight adiabatic refractory composite consisting of alkaline earth silicate fibers and SiC particles Reviewed

N. Takahashi, S.Hashimoto, Y. Daiko, S. Honda, Y. Iwamoto

Ceram. Int. 45 ( 17 Part B ) 23248 - 23255 2019.12

Language：English Publishing type：Research paper (scientific journal)

Other Link： https://www.sciencedirect.com/science/article/pii/S0272884219322163

Removal of As(III) and As(V) from water using green, silica-based ceramic hollow fibre membranes via direct contact membrane distillation Reviewed International coauthorship

S. K. Hubadillah, Md. H. D. Othman, S. H. S. A. Kadir, Md. R. Jamalludin, Z. Harun, Md. H. A. Aziz, M. A. Rahman, J. Jaafar, M. Nomura, S. Honda, Y. Iwamoto and H. Fansuri

RSC Adv. 9 3367 - 3376 2019.09

Language：English Publishing type：Research paper (scientific journal)

Other Link： https://pubs.rsc.org/en/content/articlehtml/2019/ra/c8ra08143c

Improvement in heat resistivity of alkaline earth silicate fiber boards by Al4SiC4 coating Reviewed

N. Takahashi, S. Hashimoto, N. Okamoto, S. Honda, Y. Daiko, Y. Iwamoto

Int. J. Appl. Ceram. Technol. 16 2316 - 2321 2019.07

Language：English Publishing type：Research paper (scientific journal)

Other Link： https://ceramics.onlinelibrary.wiley.com/doi/full/10.1111/ijac.13341

Characteristics of castables incorporating highly porous alumina aggregates fabricated by high-temperature evaporation method Reviewed

D. Muto, S. Hashimoto, Y. Daiko, S. Honda, Y. Iwamoto

Ceram. Int. 45 13509 - 13517 2019.07

Language：English Publishing type：Research paper (scientific journal)

Other Link： https://www.sciencedirect.com/science/article/pii/S0272884219308764

Dynamics of proton infiltration into binary MO·P2O5 (M = Ca, Sr) phosphate glasses Reviewed

Y. Daiko, J. Sumin, S. Honda, Y. Iwamoto

Solid State Ionics 35 151 - 155 2019.07

Language：English Publishing type：Research paper (scientific journal)

Other Link： https://www.sciencedirect.com/science/article/pii/S0167273818307240

Formation and Thermal Behaviors of Ternary Silicon Oxycarbides derived from Silsesquioxane Derivatives Reviewed

Y. Iwase, T. Fuchigami, Y. Horie, Y. Daiko, S. Honda and Y. Iwamoto

materials 12 1721 - 1721 2019.05

Language：English Publishing type：Research paper (scientific journal)

Other Link： https://www.mdpi.com/1996-1944/12/10/1721

Properties and performance evaluation of dual-layer ceramic hollow fiber with modified electrolyte for MT-SOFC Reviewed

S. M. Jamil, Md. H. D. Othman, M. A. Rahman, J. Jaafar, A. F. Ismail, S. Honda and Y. Iwamoto

Renewable Energy 134 1423 - 1433 2019.04

Language：English Publishing type：Research paper (scientific journal)

Other Link： https://www.sciencedirect.com/science/article/pii/S0960148118311418

High-temperature shrinkage suppression in refractory ceramic fiber board using novel surface coating agent Reviewed

N. Takahashi, S. Hashimoto, Y. Daiko, S. Honda, Y. Iwamoto

Ceram. Int. 44 16725 - 16732 2018.06

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ceramint.2018.06.100

Palm-sized Ag+ ion emission gun operated at room temperature and non-vacuum atmosphere Reviewed International journal

Y. Daiko, K. Segawa, K. Machida, H. Imataka, S. Honda, Y. Iwamoto

Advanced Engineering Materials 20 1800198 2018.05

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal) Publisher：WILEY-V C H VERLAG GMBH

室温付近でも高いAg+イオン伝導性を示すAgI-Ag2O-B2O3ガラスを先鋭化して電界印加することで、室温かつ大気圧雰囲気においてもAg+イオン放出を確認しました。Ag+イオン放出寿命を電気化学水晶振動子微量天秤による電流値と振動数変化から議論しています。またAg+イオン照射後のガラス基板にはより多数のHeLa細胞が付着することを明らかにしました。兵庫県立大学との共同研究成果です。

DOI： 10.1002/adem.201800198

Other Link： https://onlinelibrary.wiley.com/doi/full/10.1002/adem.201800198

Void formation/elimination and viscoelastic response of polyphenylsilsesquioxane monolith Reviewed International journal

Y. Daiko, Y. Oda, S. Honda, Y. Iwamoto

materials 11 ( 5 ) 846 2018.05

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal) Publisher：MDPI AG, Basel, Switzerland

SiO2(シリカ)はSiが4つの酸素で囲まれていますが、4つのうち一つをフェニル基に置き換えたものがフェニルシルセスキオキサン(PSQ)と呼ばれます。このPSQ粒子はゾル-ゲル法によって合成でき、粒子をガラス転移温度以上で加熱プレスすることで透明なバルク体に転移し、また絶縁性も比較的高いです。粒子→バルク転移時の変形挙動をin-situ解析したところ、粒子間にボイドが存在する場合は粘弾性挙動を示すのに対して、ボイドフリーのものは弾性変形すること、またボイドフリーの方がより高い絶縁耐圧を示すことを実験的に明らかにしました。

DOI： 10.3390/ma11050846

Other Link： http://www.mdpi.com/1996-1944/11/5/846?type=check_update&version=1

Ag+ ion emission from a sharp Ag₂O-Al₂O₃-P₂O₅-SiO₂ glass-fiber emitter Reviewed International journal

Y. Daiko, K. Segawa, S. Honda, Y. Iwamoto

Solid State Ionics 322 5 - 10 2018.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal) Publisher：ELSEVIER

成形性に優れるAg+イオン伝導性ガラスを溶融法で作製して、その先端を先鋭化して真空条件で高電圧を印加することで、ガラス先端からのAg+イオン放出を確認しました。イオン電流と電圧の関係はショットキープロットでよい直線性が見られ、Ag+イオン放出は熱電子放出と同じショットキーモデルで表されることが明らかとなりました。

DOI： 10.1016/j.ssi.2018.04.018

Other Link： https://www.sciencedirect.com/science/article/pii/S0167273818301784

Characterization of porous alumina bodies fabricated by high-temperature evaporation of boric acid with sodium impurity Reviewed

D. Muto, S. Hashimoto, S. Honda, Y. Daiko, Y. Iwamoto

Ceram. Int. 44 3678 - 3683 2018.03

Language：English Publishing type：Research paper (scientific journal)

Microporosity and CO2 Capture Properties of Amorphous Silicon Oxynitride Derived from Novel Polyalkoxysilsesquiazanes Reviewed

Y. Iwase, Y. Horie, Y. Daiko, S, Honda, Y. Iwamoto

materials 11 422 - 422 2018.03

Language：English Publishing type：Research paper (scientific journal)

Composite Laser Ceramic by Advanced Bonding Technology Reviewed

A. Ikesue, Y. L. Aung, T. Kamimura, S. Honda and Y. Iwamoto

materials 11 271 - 271 2018.02

Language：English Publishing type：Research paper (scientific journal)

Synthesis of a novel polyethoxysilsesquiazane and thermal conversion into ternary silicon oxynitride ceramics with enhanced thermal stability Reviewed

Y. Iwase, Y. Horie, Y. Daiko, S. Honda, Y. Iwamoto

materials 11 139 - 139 2018.01

Language：English Publishing type：Research paper (scientific journal)

Hot sulfuric acid-resistance of fly-ash-based geopolymer as a refractory materia Reviewed

S. Hashimoto, T. Machino, K. Ando, Y. Daiko, S. Honda, Y. Iwamoto

Constr. Build. Mater. 151 714 - 719 2017.10

Language：English Publishing type：Research paper (scientific journal)

Fabrication of SiC Hardened Bodies with Geopolymer Binders using a Warm Press Method

S. Hashimoto, K. Kubota, K. Ando, M. Tsutani, Y. Daiko, S. Honda and Y. Iwamoto

Green Construction and Engineering Education for Sustainable Future AIP Conf. Proc. 1887 1 - 7 2017.08

Language：English Publishing type：Research paper (international conference proceedings)

DOI： 10.1063/1.5003494

H+ emission under room temperature and non-vacuum atmosphere from a sol-gel-derived nanoporous emitter Reviewed

Y. Daiko, S. Mizutani, K. Machida, H. Imataka, S. Honda, Y. Iwamoto

J. Sol Gel-Sci. Technol. 83 252 - 258 2017.05

Language：English Publishing type：Research paper (scientific journal)

Amine-functionalized polycarbosilane hybrids for CO2-selective membranes Reviewed International coauthorship

Z. Mouline, K. Asai, Y. Daiko, S. Honda, S. Bernard, Y. Iwamoto

J. Eur. Ceram. Soc. 37 5213 - 5221 2017.04

Language：English Publishing type：Research paper (scientific journal)

Fabrication of pure phase calcium carbonate hardened bodies as a means of creating novel geomimetic ceramics Reviewed

S. Hashimoto, S. Kusawake, Y. Daiko, S. Honda and Y. Iwamoto

Constr. Build. Mater. 135 405 - 410 2017.03

Language：English Publishing type：Research paper (scientific journal)

Effect of fabrication parameters on physical properties of metakaolin-based ceramic hollow fibre membrane (CHFM) Reviewed

S. K. Hubadillah, M. H. D. Othman, Z. Harun, A.F. Ismail, Y. Iwamoto, S. Honda, M. A. Rahman, J. Jaafar, P. Gani, and M. N. M. Sokri

Ceram. Int. 42 ( 14 ) 15547 - 15558 2016.11

Language：English Publishing type：Research paper (scientific journal)

Polymer-derived organoamine-functionalized amorphous silica materials for CO2-selective membranes Reviewed

Z. Mouline, K. Asai, Y. Daiko, S. Honda, S. Bernard and Y. Iwamoto

Ceram. Soc. Japan 124 989 - 995 2016.10

Language：English Publishing type：Research paper (scientific journal)

Fabrication and thermal conductivity of highly porous alumina body from platelets with yeast fungi as a pore forming agent Reviewed

S. Honda, S. Hashimoto, S. Yase, Y. Daiko, Y. Iwamoto

Ceram. Int. 42 13882 - 13887 2016.09

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Effect of grinding treatment of fly ash on compressive strength of hardened geopolymers using form press method

S. hashimoto, K. Kubota, K. Ando, Y. Daiko, S. Honda and Y. Iwamoto

Proceeding Book Title: AGS-MIGS 2016.08

Language：English Publishing type：Research paper (international conference proceedings)

Fabrication of slaked lime compacts (plaster) with high compressive strength using a warm press method Reviewed

S. Hashimoto, W. Shimoda, H. Takeda, Y. Daiko, S. Honda and Y. Iwamoto

Constr. Build. Mater. 110 65 - 69 2016.05

Language：English Publishing type：Research paper (scientific journal)

Formation of micro and mesoporous amorphous silica-based materials from single source precursors Reviewed

M. N. M. Sokri, Y. Daiko, Z. Mouline, Y. Daiko, S. Honda and Y. Iwamoto

Inorganics 4 ( 1 ) 5 - 5 2016.03

Language：English Publishing type：Research paper (scientific journal)

DOI： doi:10.3390/inorganics4010005

Relationship between Eu3+ substitution sites and photoluminescence properties of SrIn2O4:Eu3+ spinel phosphors Reviewed International coauthorship

Y. Kang, B. Thuy, Y. Shimokawa, S. Sakaida, L. Miao, S. Tanemura, S. Honda and Y. Iwamoto

J. Lumin. 169 78 - 85 2016.01

Language：English Publishing type：Research paper (scientific journal)

Anisotropic properties of highly textured porous alumina formed from platelets Reviewed

S. Honda, S. Hashimoto, S. Iwata, Y. Iwamoto

Ceram. Int. 42 1453 - 1458 2016.01

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Polymer-Derived Silicoboron Carbonitride Foams for CO2 Capture: From Design to Application as Scaffolds for the in Situ Growth of Metal–Organic Frameworks Reviewed International coauthorship

F. Sandra, M. Depardieu, Z. Mouline, G. L. Vignoles, Y. Iwamoto, P. Miele, R. Backov and S. Bernard

Chem. Eur. J. 22 8346 - 8357 2016.01

Language：English Publishing type：Research paper (scientific journal)

Antimicrobial activity of geopolymers ion-exchanged with copper ions Reviewed International coauthorship

S. Hashimoto, T. Machino, H. Takeda, Y. daiko, S. Honda and Y. Iwamoto

Ceram. Int. 41 ( 10(A) ) 13788 - 13792 2015.12

Language：English Publishing type：Research paper (scientific journal)

Hydrophobicity of amorphous silica-based inorganic-organic hybrid materials derived from perhydropolysilazane chemically modified with alcohols Reviewed

M. N. M. Sokri, T. Onishi, Y. Daiko, S. Honda and Y. Iwamoto

Microporous Mesoporous Mat. 215 183 - 190 2015.10

Language：English Publishing type：Research paper (scientific journal)

High Temperature Characteristics of Potassium Geopolymers

T. Machino, S. Hashimoto, H. Hirano, S. Honda and Y. Iwamoto

UNITECR2015 2015.09

Language：English Publishing type：Research paper (international conference proceedings)

Polymer-derived amorphous silica-based inorganic-organic hybrids having alkoxy groups: intermediates for synthesizing microporous amorphous silica materials Reviewed

M. N. M. Sokri, T. Onishi, Z. Mouline, Y. Daiko, S. Honda and Y. Iwamoto

J. Ceram. Soc., Japan 123 732 - 736 2015.09

Language：English Publishing type：Research paper (scientific journal)

Synthesis and characterization of organoamine-functionalized amorphous silica materials for CO2-selective membranes Reviewed

Z. Mouline, K. Asai, A. Kawai, K. Sekimoto, T. Onishi, Y. Daiko, S. Honda and Y. Iwamoto

J. Ceram. Soc., Japan 123 779 - 784 2015.09

Language：English Publishing type：Research paper (scientific journal)

Synthesis and characterization of Eu3+ doped CaZrO3-based perovskite type phosphors. Part I: Determination of the site occupied by Eu3+ using ALCHEMI technique Reviewed

S. Sakaida, Y. Shimokawa, T. Asaka, S. Honda and Y. Iwamoto

Mater. Res. Bull. 67 146 - 151 2015.07

Language：English Publishing type：Research paper (scientific journal)

Novel coloring of geopolymer products using a copper solution immersion method Reviewed

S. Hashimoto, H. Takeda, S. Honda and Y. Iwamoto

Constr. Build. Mater. 88 143 - 148 2015.07

Language：English Publishing type：Research paper (scientific journal)

A Facile Surfactant-Assisted Reflux Method for the Synthesis of Single-Crystalline Sb2Te3 Nanostructures with Enhanced Thermoelectric Performance Reviewed International coauthorship

H. Q. Yang, L. Miao, C. Y. Liu, C. Li, S. Honda, Y. Iwamoto, R. Huang and S. Tanemura

ACS Appl. Mater. Interfaces 7 14263 - 14271 2015.06

Language：English Publishing type：Research paper (scientific journal)

Synthesis of microporous amorphous silica from perhydropolysilazane chemically modified with alcohol derivatives Reviewed

M. N. M. Sokri, Y. Daiko, S. Honda and Y. Iwamoto

J. Ceram. Soc. Japan 123 ( 1436 ) 292 - 297 2015.04

Language：English Publishing type：Research paper (scientific journal)

Formation of aluminum nitride from metal-organic precursors synthesized by reacting aluminum tri-chloride with bis(trimethylsilyl)carbodiimide Reviewed

Y. Shimokawa, A. Fujiwara, E. Ionescu, G. Mera, S. Honda Y. Iwamoto and R. Riedel

J. Ceram. Soc. Japan 123 ( 1435 ) 106 - 113 2015.03

Language：English Publishing type：Research paper (scientific journal)

Synthesis and characterization of Eu3+ doped CaZrO3-based perovskite type phosphors. Part II: PL properties related to the two different dominant Eu3+ substitution sites Reviewed

Y. Shimokawa, S. Sakaida, S. Iwata, K. Inoue, S. Honda and Y. Iwamoto

Journal of Luminescence 157 113 - 118 2015.01

Language：English Publishing type：Research paper (scientific journal)

Synthesis and characterization of luminescent properties of ceramics derived from polysilylcarbodiimides Reviewed

Y. Shimokawa, A. Fujiwara, E. Ionescu, G. Mera, S. Honda Y. Iwamoto and R. Riedel

J. Ceram. Soc. Japan 122 ( 1430 ) 895 - 901 2014.10

Language：English Publishing type：Research paper (scientific journal)

Gas separation using Knudsen and surface diffusion II: Effects of surface modification of epoxy/porous SiO2 composite Reviewed

T. Isobe, M. Nishimura, S. Matsushita, S. Honda, Y. Iwamoto and A. Nakajima

J. Asian Ceram. Soc. 2 ( 3 ) 190 - 194 2014.09

Language：English Publishing type：Research paper (scientific journal)

The coloring of geopolymers by the addition of copper compounds Reviewed

H. Takeda, S. Hashimoto, S. Honda and Y. Iwamoto

Ceram. Int. 40 6503 - 6507 2014.06

Language：English Publishing type：Research paper (scientific journal)

Fabrication and characterization of hardened bodies from Japanese volcanic ash using geopolymerization Reviewed

H. Takeda, S. Hashimoto, H. Kanie, S. Honda and Y. Iwamoto

Ceram. Int. 40 4071 - 4076 2014.04

Language：English Publishing type：Research paper (scientific journal)

Rapid fabrication of highly dense geopolymers using a warm press method and their ability to absorb neutron irradiation Reviewed

H. Takeda, S. Hashimoto, H. Matsui, S. Honda and Y. Iwamoto

Construction and Building Materials 50 82 - 86 2014.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.conbuildmat.2013.09.014

Hydrothermal stability of hydrogen permselective amorphous silica membrane synthesized by counter diffusion chemical vapor deposition method Reviewed

K. Miyajima, T. Eda, B. N. Nair, S. Honda and Y. Iwamoto

J. Ceram. Soc. Japan 121 992 - 998 2013.12

Language：English Publishing type：Research paper (scientific journal)

Characterization of Zeolite in Zeolite-geopolymer Hybrid Bulk Materials Derived from Kaolinitic Clays Reviewed

H. Takeda, S. Hashimoto, A. Yokoyama, S. Honda and Y. Iwamoto

Materials 6 1767 - 1778 2013.05

Language：English Publishing type：Research paper (scientific journal)

Synthesis and characterization of Mn-activated lithium aluminate red phosphors Reviewed

M. Aoyama, Y. Amano, K. Inoue, S. Honda, S. Hashimoto and Y. Iwamoto

Journal of Luminescence 136 411 - 414 2013.04

Language：English Publishing type：Research paper (scientific journal)

Synthesis and characterization of lithium aluminate red phosphors Reviewed

M. Aoyama, Y. Amano, K. Inoue, S. Honda, S. Hashimoto, and Y. Iwamoto

Journal of Luminescence 135 211 - 215 2013.03

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.jlumin.2012.10.014

Improvement on characteristics of porous alumina from platelets using a TEOS treatment Reviewed

S. Honda, S. Hashimoto, Y. Ito, R. Hanai, H. Hirano and Y. Iwamoto

Ceram. Int. 39 ( 2 ) 1265 - 1270 2013.03

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ceramint.2012.07.057

Fabrication and porous spinel (MgAl2O4) from porous alumina using a template method Reviewed

S. Hashimoto, S. Honda, T. Hiramatsu and Y. Iwamoto

Ceram. Int. 39 2077 - 2081 2013.03

Language：English Publishing type：Research paper (scientific journal)

Energy efficient synthesis of porous ZrO2 with fine closed pores by microwave irradiation Reviewed

S. Hashimoto, T. Umeda, K. Hirao, N. Kondo, H. Hyuga, Y. Zhou, S. Honda and Y. Iwamoto

Materials Letters 93 293 - 296 2013.02

Language：English Publishing type：Research paper (scientific journal)

Fabrication and characterization of porous ZrO2 with a high volume fraction of fine closed pores Reviewed

S. Hashimoto, T. Umeda, K. Hirao, N. Kondo, Y. Zhou, H. Hyuga, S. Honda and Y. Iwamoto

J. Eur. Ceram. Soc. 33 ( 1 ) 61 - 66 2013.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.jeurceramsoc.2012.08.010

Development zeolite-derived novel aluminosilicate phosphors", Journal of Luminescence Reviewed

M. Aoyama, T. Hayakawa, S. Honda, and Y. Iwamoto

Journal of Luminescence 132 2603 - 2607 2012.10

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.jlumin.2012.05.014

Fabrication of bulk materials with zeolite from coal fly ash Reviewed

H. Takeda, S. Hashimoto, T. Iwata, S. Honda and Y. Iwamoto

J. Mater. Cycles Waste Manag 14 403 - 510 2012.09

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1007/s10163-012-0084-7

Formation Mechanism of Ti2AlC under the Self-propagating High-temperature Synthesis (SHS) Mode Reviewed

S. Hashimoto, N. Nishina, K. Hirao, Y. Zhou, H. Hyuga, S. Honda and Y. Iwamoto

Mater. Res. Bull. 47 ( 5 ) 1164 - 1168 2012.05

Language：English Publishing type：Research paper (scientific journal)

Mechanism for the Formation of SiC by Carbothermal Reduction Reaction Using a Microwave Heating Technique

S. Hashimoto, S. Ohashi, K. Hirao, Y. Zhou, H. Hyuga, S. Honda and Y. Iwamoto

J. Ceram. Soc. Japan 119 740 - 744 2011.10

Language：English Publishing type：Research paper (scientific journal)

Mechanical Properties of Al8B4C7 with Alumina Platelets Reviewed

A. Ducastel, S. Hashimoto, T. Ishihara, S. Honda and Y. Iwamoto

Journal of the Technical Association of Refractories, Japan 31 ( 4 ) 203 - 207 2011.04

Language：English Publishing type：Research paper (scientific journal)

Dielectric Breakdown and Thermal Conductivity of Textured Alumina from Platelets Reviewed

Y. Nishimura, S. Hashimoto, S. Honda and Y. Iwamoto

J. Ceram. Soc. Japan 118 ( 11 ) 1032 - 1037 2010.11

Language：English Publishing type：Research paper (scientific journal)

Microtexture Control of Alumina Using Anisotropic Alumina Particles

S. Hashimoto, Y. Nishimura, H. Hirano, S. Honda and Y. Iwamoto

Advances in Science and Technology 70 82 - 90 2010.10

Language：English Publishing type：Research paper (international conference proceedings)

In-situ Formation of Novel Geopolymer-Zeolite Hybrid Bulk Materials from Coal Fly Ash Powder Reviewed

H.Takeda, S.Hashimoto, S.Honda and Y.Iwamoto

Journal of the Ceramic Society of Japan 118 ( 8 ) 771 - 774 2010.08

Language：English Publishing type：Research paper (scientific journal)

Synthesis and Mechanical Properties of Porous Alumina from Anisotropic Alumina Reviewed

S. Hashimoto, S. Horita, Y. Ito, H. Horita, S. Honda and Y. Iwamoto

Journal of Europian Ceramics Society 30 ( 3 ) 635 - 639 2010.02

Language：English Publishing type：Research paper (scientific journal)

Synthesis of Al4Si2C5 and Its Physicochemical Properties

S. Hashimoto, S. Ohashi, S. Honda and Y. Iwamoto

UNITECER 2009 2009.10

Language：English Publishing type：Research paper (international conference proceedings)

Strength and Thermal Shock Properties of Scandia-Doped Zirconia for Thin Electrolyte Sheet of Solid Oxide Fuel Cell Reviewed

S. Honda K. Kimata S. Hashimoto Y. Iwamoto J. Shimano M. Yokoyama K. Ukai Y. Mizutani

Material Transactions 50 1742 - 1746 2009.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Estimation of Thermal Shock Resistance of Fine Porous Alumina by Infrared Radiation Heating Method Reviewed

S. Honda Y. Ogihara T. Kishi S. Hahimoto Y. Iwamoto

Journal of the Ceramic Society of Japan 117 1208 - 1215 2009.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Sintering and Mechanical Properties of Complex Carbides in the Al-Si-C System

S. Hashimoto, T. Asano, K. Inoue, S. Honda, Y. Iwamoto and S.Zhang

Jounal of the Technical Association of Referactories 29 ( 1 ) 21 - 25 2009.01

Language：English Publishing type：Research paper (international conference proceedings)

Synthesis and Mechanical Properties of Complex Carbides

S. Hashimoto, T. Ishihara, T. Asano, K. Inoue, S. Honda and Y. Iwamoto

IWAC03 2008.11

Language：English Publishing type：Research paper (international conference proceedings)

Pressureless Sintering and Mechanical Properties of Titanium Aluminum Carbide Reviewed

S. Hashimoto M. Takeuchi K. Inoue S. Honda H. Awaji K. Fukuda

Materials Letter 62 1480 - 1483 2008.04

Language：English Publishing type：Research paper (scientific journal)

Evaluation of Fracture Strength of Thin Electrolyte-Supported Planar Solid Oxide Fuel Cell Reviewed

S. Honda K. Kimata S. Hashimoto Y. Iwamoto J. Shimano M. Yokoyama K. Ukai Y. Mizutani

Proceedings of 25th International Korea-Japan Seminar on Ceramics 25 393 - 396 2008.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Strength and Thermal Shock Properties of Sc-doped Zirconia for Thin Electrolyte Sheet of Solid Oxide Fuel Cell Reviewed

S. Honda S. Mizuno S. Hashimoto Y. Iwamoto J. Shimano K. Ukai Y. Mizutani,

Proceedings of 24th International Japan-Korea Seminar on Ceramics 24 195 - 198 2007.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Design and Characterization of Porosity Gradient for the Laminated Alumina Tubes Reviewed

C-H Chen S. Ishiguro S. Honda H. Awaji

Key Engineering Materials 317-318 339 - 342 2006.04

Language：English Publishing type：Research paper (scientific journal)

Effect of Alpha-alumina as a Seed in Alumina/Silicon Carbide Composites Reviewed

S.-M. Choi U. Leela-adisorn S. Honda S. Hashimoto H. Awaji

Key Engineering Materials 317-318 339 - 342 2006.04

Language：English Publishing type：Research paper (scientific journal)

Sintering and Characterization of Zr2Al2C5 Monolith Reviewed

U. Leela-adisorn S.-M. Choi S. Hashimoto S. Honda H. Awaji K. Hayakawa A. Yamaguchi

Key Engineering Materials 317-318 27 - 30 2006.04

Language：English Publishing type：Research paper (scientific journal)

Alumina-based Nanocomposites Fabricated by a Novel Soaking Method Reviewed

U. Leela-adisorn T. Matsunaga S.-M. Choi S. Honda H. Awaji

Key Engineering Materials 317-318 27 - 30 2006.04

Language：English Publishing type：Research paper (scientific journal)

Estimation of Thermal Shock Resistance by Infrared Radiation Heating and Water Flow Cooling Techniques Reviewed

S. Honda H. Tanaka H. Awaji

Key Engineering Materials 317-318 339 - 342 2006.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Thermal Shock Testing of Ceramics for Circuit Substrates Reviewed

S. Honda S. Hashimoto H. Awaji

Advanced Materials Research 11-12 31 - 34 2006.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Comminution of Asbestos by a Mechanical Grinding in Asbestos-Containing Cement Board Reviewed

S. Hashimoto A. Yamaguchi S. Honda H. Awaji K. Fukuda

Journal of the Ceramic Society of Japan 113 804 - 807 2005.04

Language：English Publishing type：Research paper (scientific journal)

Fabrication and Mechanical Properties of Sintered Leucite Body Reviewed

S. Hashimoto F. Sato S. Honda H. Awaji K. Fukuda

Journal of the Ceramic Society of Japan 113 488 - 490 2005.04

Language：English Publishing type：Research paper (scientific journal)

Properties of Multilayered Mullite/Mo Functionally Graded Materials Fabricated by Powder Metallurgy Processing Reviewed

G. Jin M. Takeuchi S. Honda T. Nishikawa H. Awaji

Materials Chemistry and Physics 89 238 - 243 2005.04

Language：English Publishing type：Research paper (scientific journal)

Fabrication on Porous Alumina Tube by Centrifugal Molding Reviewed

C-H. Chen K. Takita S. Ishiguro S. Honda H. Awaji

Journal of European Ceramic Society 25 3257 - 3264 2005.04

Language：English Publishing type：Research paper (scientific journal)

Synthesis, Sintering and Thermal Shock Resistance Estimation of Porous Cordierite by IR Heating Technique Reviewed

A. Yamuna S. Honda K. Sumita M. Yanagihara S. Hashimoto H. Awaji

Microporous and mesoporous Material 85 169 - 175 2005.04

Language：English Publishing type：Research paper (scientific journal)

Homogeneous Alumina Tube with Controlled Pore Morphology Reviewed

C. H. Chen S. Ishiguro S. Honda H. Awaji

Material Science and Engineering A407 167 - 173 2005.04

Language：English Publishing type：Research paper (scientific journal)

Fracture Behavior of Cylindrical Porous Alumina with Pore Gradient Reviewed

C. H. Chen K. Takita S. Honda H. Awaji

Journal of European Ceramic Society 25 385 - 391 2005.04

Language：English Publishing type：Research paper (scientific journal)

Sintering and Mechanical Properties of AlZrC2 Reviewed

U. Leela-adisorn S-M. Choi N. Tera T. Takeuchi S. Honda H. Awaji K. Hayakawa A. Yamaguchi

Journal of the Ceramic Society of Japan 113 188 - 190 2005.04

Language：English Publishing type：Research paper (scientific journal)

Thermal shock test for ceramics by a water-flow cooling method Reviewed

H. Tanaka S. Honda T. Nishikawa H. Awaji

Journal of the Ceramic Society of Japan 112 S299 - 304 2004.04

Language：English Publishing type：Research paper (scientific journal)

Thermal Shock Test on Mullite/Mo FGM Disks using an Infrared Radiation/Water-Flow Technique Reviewed

G. Jin M. Takeuchi S. Honda T. Nishikawa H. Awaji

Journal of the Ceramic Society of Japan 112 S286 - 290 2004.04

Language：English Publishing type：Research paper (scientific journal)

Mechanical Properties of Porous Alumina at High Temperature Reviewed

T. Nishikawa Y. Umehara S. Honda H. Awaji,

Journal of the Ceramic Society of Japan 112 S1405 - 1407 2004.04

Language：English Publishing type：Research paper (scientific journal)

急冷媒体による多孔体の熱衝撃時の熱応力 Reviewed

田中紘秋牧裕司坪井一樹本多沢雄西川直宏淡路英夫

日本セラミックス協会学術論文誌 112 172 - 178 2004.04

Language：Japanese Publishing type：Research paper (scientific journal)

作動温度下での多孔質ランタンストロンチウムマンガナイトの機械的および電気的特性 Reviewed

西川直宏小川大紀本多沢雄淡路英夫

材料 52 587 - 591 2003.04

Language：Japanese Publishing type：Research paper (scientific journal)

アルミナマトリックスナノ複合体の高強度化機構 Reviewed

崔成珉本多沢雄西川直宏淡路英夫関野徹新原皓一

材料 52 1374 - 1378 2003.04

Language：Japanese Publishing type：Research paper (scientific journal)

遠心モールド法による中空円筒傾斜機能材料の開発 Reviewed

陳春紅本多沢雄西川直宏淡路英夫

日本セラミックス協会学術論文誌 111 479 - 484 2003.04

Language：Japanese Publishing type：Research paper (scientific journal)

A Novel Technique Applied for Fabricated Alumina/Zirconia Continuous Graded Hollow Cylinder Reviewed

R. Sivakumar T. Nishikawa S. Honda H. Awaji

Journal of Ceramics Soceity of Japan 110 ( 5 ) 472 - 475 2002.04

Language：English Publishing type：Research paper (scientific journal)

Estimation of Thermal Shock Properties for Silicon Nitride Having High Thermal Conductivity Reviewed

Journal of Ceramic Soceity of Japan 110 ( 1 ) 38 - 43 2002.04

Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)

Compressive Deformation Behavior of Al-Doped Beta-SiC at Elevated Temperature Reviewed

S. Honda T. Nagano K. Kaneko H. Kodama

Journal of European Ceramic Society 22 ( 1 ) 979 - 985 2002.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Estimation of Temperature Dependence of Thermal Shock Resistance by Infrared Radiation Technique Reviewed

S. Honda T. Nishikawa H. Awaji Y. Akimune N. Hirosaki,

Ceramic Transactions 133 127 - 132 2002.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Characterization of Cylindric Porous Ceramics Prepared with Centrifugal Molding Reviewed

T. Nishikawa S. Honda H. Awaji

Ceramic Transactions 133 171 - 176 2002.04

Language：English Publishing type：Research paper (scientific journal)

Stress Analysis in Multilayered FGM Plates under Thermal Shock Reviewed

G. Jin T. Nishikawa S. Honda H. Awaji

Functionally Graded Materials 7 665 - 669 2002.04

Language：English Publishing type：Research paper (scientific journal)

Temperature/Stress Distributions in a Stress-Relief-Type Plate of Functionally Graded Materials under Thermal Shock Reviewed

Hideo AWAJI Hiromitsu TAKENAKA Sawao HONDA Tadahiro NISHIKAWA

JSME International Journal 44 ( 1 ) 37 - 44 2001.04

Language：English Publishing type：Research paper (scientific journal)

Effects of Porosity and Pore Morphology on Mechanical Properties of Porous Alumina Reviewed

Journal of the Society of Materials Science Japan 50 ( 6 ) 625 - 629 2001.04

Language：Japanese Publishing type：Research paper (scientific journal)

Influence of MgO on Microstructure and Properties of Mullite-Mo Composite Fabricated by Pulse Electric Current Sintering Reviewed

Ramasamy SIVAKUMAR D. Doni JAYASEELAN Tadahiro NISIKAWA Sawao HONDA Hideo AWAJI

Ceramics International 27 ( 5 ) 537 - 541 2001.04

Language：English Publishing type：Research paper (scientific journal)

Mullite-Molybdenum Composites Fabricated by Pulse Electric Current Sintering Technique Reviewed

Ramasamy SIVAKUMAR D. Doni JAYASEELAN Tadahiro NISIHKAWA Sawao HONDA Hideo AWAJI

Journal of European Ceramic Society 7 8 - 16 2001.04

Language：English Publishing type：Research paper (scientific journal)

Temperature/Stress Distributions in a Stress Relief Type Plate of Functionally Graded Material under Thermal Shock Reviewed

Functionally Graded Materials 13 ( 639 ) 101 - 106 2000.04

Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)

Analytical Investigation of Grain Boundaries of Compressive Deformed Al-doped Sintered b-SiC Reviewed

Materials Science & Engneering A 285 ( 1-2 ) 136 - 143 2000.04

Language：English Publishing type：Research paper (scientific journal)

Water Quench Thermal Shock Testing for Ceramic Disks Reviewed

Journal of the Ceramic Society of Japan 108 ( 2 ) 166 - 171 2000.04

Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)

Preparation and Properties of Porous Ziriconia/Nickel Composite Reviewed

Journal of the Society of Materials Science Japan 49 ( 6 ) 606 - 610 2000.04

Language：Japanese Publishing type：Research paper (scientific journal)

Static and Cyclic Stress-Lifetime Curves of Ceramics Reviewed

H. Awaji S. Yamamoto S. Honda T. Nishikawa

Journal of Materials Science Letter 19 ( 6 ) 713 - 715 2000.04

Language：English Publishing type：Research paper (scientific journal)

Temperature Distributions in a Stress-Relief-Type Plate of Functionally Graded Material under Thermal Shock Reviewed

Journal of the Ceramic Society of Japan 107 ( 9 ) 780 - 785 1999.04

Language：English Publishing type：Research paper (scientific journal)

Criterion for Combined Mode I-II of Brittle Fracture Reviewed

Journal of the Ceramic Society of Japan 107 ( 10 ) 918 - 924 1999.04

Language：English Publishing type：Research paper (scientific journal)

Analysis of Temperature/Stress Distributions in a Stress Relief Type Functionally Graded Material Plate under Thermal Shock Reviewed

Transactions of the Japan Society of Mechanical Engineers 65 ( 639 ) 2318 - 2324 1999.04

Language：Japanese Publishing type：Research paper (scientific journal)

Statistical Approach to Strength Degradiation Analysis during Water Quenching Reviewed

Journal of the Ceramic Society of Japan 106 ( 6 ) 551 - 554 1998.04

Language：English Publishing type：Research paper (scientific journal)

Estimation of Thermal Shock Fracture Toughness of Si3N4 Reviewed

Journal of the Ceramic Society of Japan 106 ( 9 ) 877 - 882 1998.04

Language：Japanese Publishing type：Research paper (scientific journal)

Statistical approach to strength degradation analysis during water quenching Reviewed

H. Awaji S. Honda T. Nishikawa

Journal of the Ceramic Society of Japan 106 877 - 82 1998.04

Language：English Publishing type：Research paper (scientific journal)

Thermal Shock Parameters of Ceramics Evaluated by Infrared Radiation Heating Reviewed

JSME International Journal 40 ( 4 ) 414 - 422 1997.04

Language：English Publishing type：Research paper (scientific journal)

Thermal Stress and Stress Intensity Factor Considering Temperature Dependent Material Properties -A Circular Disk under Constant Heat Flux- Reviewed

Journal of the Society of Materials Science Japan 46 ( 11 ) 1300 - 1305 1997.04

Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)

Effect of Oxidation on Fracture Mechanical Properties of Isotropic Graphite Reviewed

Journal of the Society of Materials Science Japan 45 ( 6 ) 609 - 613 1996.04

Language：Japanese Publishing type：Research paper (scientific journal)

Thermal Stress Analysis in Ceramics Disk Subjected to Thermal Quenching Reviewed

Journal of the Ceramic Society of Japan 103 ( 9 ) 923 - 928 1995.04

Language：Japanese Publishing type：Research paper (scientific journal)

PREV - NEXT

To the head of this page.▲

<HONDA Sawao>

Papers - HONDA Sawao