講演・口頭発表等 - 渡邉 義見
-
CP TiならびにTi-Nb-Ta-Zr 合金の酸化皮膜形成による審美性向上と剥離強度に関する研究
水嶋恵介, 三浦永理, 菊池丈幸, 山崎徹, 渡辺義見, 春日敏宏, 新家光雄
日本金属学会 2012年度秋期(第151回)大会 日本金属学会
開催年月日: 2012年09月
記述言語:日本語 会議種別:ポスター発表
-
遠心力混合粉末法にて作製したAl 合金基ダイヤモンド砥石によるCFRP の精密加工
國峯崇裕,柘植英明,山田素子,佐藤 尚,渡辺義見
日本金属学会 2012年度秋期(第151回)大会 日本金属学会
開催年月日: 2012年09月
記述言語:日本語 会議種別:口頭発表(一般)
-
熱間圧延によるアルミニウム/ジュラルミン多層クラッド材の作製と機械的性質の評価
塚本英明,小宮良樹,佐藤尚,渡辺義見
日本金属学会 2012年度秋期(第151回)大会 日本金属学会
開催年月日: 2012年09月
記述言語:日本語 会議種別:口頭発表(一般)
-
L12型金属間化合物を利用した鋳造Al用新規微細化添加剤の開発
山中邦香,松岡雄大,國峯崇裕,佐藤尚,渡辺義見
日本金属学会 2012年度秋期(第151回)大会 日本金属学会
開催年月日: 2012年09月
記述言語:日本語 会議種別:口頭発表(一般)
-
Ti添加によるCu基ダイヤモンド加工砥石の砥粒結合力の改善
佐藤尚,間宮佑太,渡辺義見
日本機械学会 2012年度年次大会 日本機械学会
開催年月日: 2012年09月
記述言語:日本語 会議種別:口頭発表(一般)
-
バリアント制御によるFe-Mn合金の制振能向上
渡辺義見,須賀裕介,佐藤 尚,西野 洋一
日本機械学会 2012年度年次大会 日本機械学会
開催年月日: 2012年09月
記述言語:日本語 会議種別:口頭発表(一般)
-
Study on Mechanical Properties of Aluminum/ Duralumin Multi-layered Clad Structures with Interface Compositional Gradient Fabricated by Hot Rolling 国際会議
Hideaki Tsukamoto, Yoshiki Komiya, Hisashi Sato and Yoshimi Watanabe
International Conference on Metallic Materials and Processing, (ICMMP2012)
開催年月日: 2012年07月
記述言語:英語
開催地:Gold Coast, Queensland, Australia
-
Precision Machining of Carbon Fiber-Reinforced Plastic Plates by Aluminum Alloy-Based Grinding Wheel including Nano/Micro-Diamond Abrasive Grains Produced by the Centrifugal Mixed-Powder Method 国際会議
T. Kunimine, M. Yamada, H. Sato and Y. Watanabe
2012 International Conference of Applications in Nano-Micro Technologies
開催年月日: 2012年07月
記述言語:英語 会議種別:ポスター発表
開催地:Beijing,China.
-
Heterogeneous Nucleation and Grain Refinement in Cast Al and Mg Alloys 国際会議
Yoshimi Watanabe and Hisashi Sato
6th Korea-Japan Berkeley Symposium on Advanced Materials
開催年月日: 2012年06月
記述言語:英語 会議種別:口頭発表(一般)
開催地:Berkeley, USA
-
Development of Copper/Diamond Functionally Graded Grindind Wheel for CFRP Drilling by Centrifugal Sintered-Casting Method 国際会議
Takahiro Kunimine, Masafumi Shibuya, Motoko Yamada, Hisashi Sato and Yoshimi Watanabe
International Conference on Mechanics of Nano, Micro and Macro Composite Structures,
開催年月日: 2012年06月
記述言語:英語 会議種別:口頭発表(一般)
開催地:Torino, Italy
-
Nano- and Micro-Indentation Properties of ZrO2/Ti Functionally Graded Materials Fabricated by Spark Plasma Sintering 国際会議
Hideaki Tsukamoto, Yoshiki Komiya, Toshihiro Imai, Hisashi Sato and Yoshimi Watanabe
International Conference on Mechanics of Nano, Micro and Macro Composite Structures,
開催年月日: 2012年06月
記述言語:英語
開催地:Torino, Italy
-
Transformation toughening in functionally graded thermal barrier coatings 国際会議
H. Tsukamoto*, H. Sato and Y. Watanabe
NIMS Conference 2012
開催年月日: 2012年06月
記述言語:英語
開催地:Tsukuba, Japan.
-
Development of a grain refiner using L12 intermetallic compounds for Al casting alloys 国際会議
K. Yamanaka, T. Matsuoka, T. Kunimine, H. Sato and Y. Watanabe
NIMS Conference 2012
開催年月日: 2012年06月
記述言語:英語 会議種別:ポスター発表
開催地:Tsukuba, Japan.
-
Optimization of Process Conditions for Cu-Diamond Grinding Wheel Fabricated by a Centrifugal Mixed-Powder Method 国際会議
A. Mizuno, H. Sato, T. Kunimine and Y. Watanabe
NIMS Conference 2012
開催年月日: 2012年06月
記述言語:英語 会議種別:ポスター発表
開催地:Tsukuba, Japan.
-
ZrO2/Ti functionally graded materials fabricated by spark plasma sintering 国際会議
H. Tsukamoto, Y. Komiya, H. Sato, Y. Watanabe
NIMS Conference 2012
開催年月日: 2012年06月
記述言語:英語
開催地:Tsukuba, Japan.
-
Micro- and macro-mechanical properties of aluminum/ duralumin multi-layered clad structures with interface compositional gradient fabricated by hot rolling 国際会議
H. Tsukamoto, Y. Komiya, H. Sato and Y. Watanabe
NIMS Conference 2012
開催年月日: 2012年06月
記述言語:英語
開催地:Tsukuba, Japan.
-
Three-dimensional visualization of the wear-structure of Al-Al3Ti functionally graded materials 国際会議
Y. Noda, H. Sato and Y. Watanabe
NIMS Conference 2012
開催年月日: 2012年06月
記述言語:英語 会議種別:ポスター発表
開催地:Tsukuba, Japan.
-
Fabrication of Aluminum Alloy-Based Functionally Graded Grinding Wheel by a Centrifugal Mixed-PowderMethod for Novel Machining Technology of CFRP 国際会議
Takahiro Kunimine, Motoko Yamada, Hisashi Sato and Yoshimi Watanabe
Proceedings of the 13th International Conference on Aluminum Alloys (ICAA13)
開催年月日: 2012年06月
記述言語:英語 会議種別:ポスター発表
開催地:Pittsburgh, PA
-
3-dimensional Microstructure of Al-Al3Ti Alloy Severely Deformed by ECAP 国際会議
Hisashi Sato, Takahisa Hishikawa, Yuuki Makino, Takahiro Kunimine and Yoshimi Watanabe
Proceedings of the 13th International Conference on Aluminum Alloys (ICAA13)
開催年月日: 2012年06月
記述言語:英語 会議種別:口頭発表(一般)
開催地:Pittsburgh, PA
-
切削屑を利用して製造した遠心鋳造材高力黄銅の組織と摺動特性
大矢泰正,船瀬貴広,佐藤尚,渡辺義見
日本鋳造工学会 第160回全国講演大会 日本鋳造工学会
開催年月日: 2012年05月
記述言語:日本語 会議種別:口頭発表(一般)