Details of a Researcher

Papers - SATO Hisashi

Division display >> ／ All the affair displays 1 - 194 of about 194

Characteristics of Cast Ti_53.3-xNb₁₀Zr₁₀Ni₁₀Co₁₀Fe_6.7B_x Compositionally Complex Alloys Reviewed International coauthorship

Shimaa El Hadad, Mostafa Alshafey, H. Megahed, Hisashi Sato, Lamiaa Z. Mohamed

2024.12

Language：English Publishing type：Research paper (scientific journal)

Cu/AlN Composite and Functionally Graded Materials with High Strength and High Electrical- and Thermal-Conductivity Fabricated by Spark Plasma Sintering Reviewed International journal

Yoshimi Watanabe, Yoshimasa Ohtawa, Hidetoshi Miyazaki, Hisashi Sato

Japanese Journal of Applied Physics 2024.10

Authorship：Last author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.35848/1347-4065/ad8451

Grain Refiner Fabricated by Spark Plasma Sintering for Hypoeutectic Al-Si Alloy Cast and Its Refining Ability Reviewed International journal

Hisashi Sato, Fumiya Nakamura, Yoshimi Watanabe

Japanese Journal of Applied Physics 2024.10

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.35848/1347-4065/ad8acd

Formation of Graded TiO₂ Layer on Ti Wire by Direct Alternating Current Discharge Plasma at Atmospheric Pressure Invited Reviewed

Yoshimi Watanabe, Naho Mitsuishi, Motoko Yamada, Hisashi Sato, Seigo Takashima and Eri Miura-Fujiwara

14 ( 11 ) 1207-1 - 1207-15 2024.10

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.3390/met14111207

Crucible-less Processing of Ti with TiC Heterogeneous Nucleation Site Particles by Electrostatic Levitation Reviewed International journal

Yoshimi Watanabe, Goro Takahashi, Ryosei Saguchi, Hisashi Sato, Hirokazu Aoki, Shinsuke Suzuki, Shizuka Nakano, Yuki Watanabe, Chihiro Koyama, Hirohisa Oda, Takehiko Ishikawa

International Journal of Thermophysics 45 144-1 - 144-20 2024.09

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1007/s10765-024-03435-y

Effects of Post-Welded Hot Rolling on the Properties of Explosively Welded Mg Alloy/Al Alloy Cladding Plates Reviewed International journal

Proceedings of IIW 2024 -International Conference on Welding and Joining ( FP278 ) 1 - 7 2024.07

Language：English Publishing type：Research paper (international conference proceedings)

Solid State Bonding of Iron or Steel with Stainless Steels by Spark Plasma Sintering Bonding Reviewed International journal

Yoshimi Watanabe, Takuma Furuhashi, Tadachika Chiba, Tomokazu Moritani, Hisashi Sato

26 ( 16 ) 2400290ｰ1 - 2400290ｰ10 2024.07

Authorship：Last author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1002/adem.202400290

Elucidation of Solidification Behavior of Ti-6Al-4V under Convection and a Temperature Gradient Using Levitation Methods Reviewed International journal

Chihiro Hanada, Yuji Mabuchi, Koei Kadoi, Yuto Ueda, Yuta Kushiya, Hirokazu Aoki, Ryosei Saguchi, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Yuma Harada, Shumpei Ozawa, Shizuka Nakano, Hirohisa Oda, Chihiro Koyama, Takehiko Ishikawa, Yuki Watanabe, Shinsuke Suzuki

Metallurgical and Materials Transactions B 55 ( 4 ) 2864 - 2879 2024.06

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1007/s11663-024-03148-5

Dissolution Behavior of TiC Heterogeneous Nucleation Site Particles in Ti–6Al–4V in Electrostatic Levitation Method Reviewed International journal

Yuji Mabuchi, Chihiro Hanada, Hirokazu Aoki, Koei Kadoi, Yuto Ueda, Yuta Kushiya, Ryosei Saguchi, Kanae Yoneda, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Shumpei Ozawa, Shizuka Nakano, Hirohisa Oda, Chihiro Koyama, Takehiko Ishikawa, Yuki Watanabe, Shinsuke Suzuki

Metallurgical and Materials Transactions B 55 ( 4 ) 2467 - 2484 2024.05

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1007/s11663-024-03108-z

Heating Conditions in Electrostatic Levitation Experiments for Grain Refinement of Ti-6Al-4V with TiC Reviewed International journal

Yuji Mabuchi, Hirokazu Aoki, Chihiro Hanada, Yuto Ueda, Koei Kadoi, Yuta Kushiya, Ryosei Saguchi, Kanae Yoneda, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Shumpei Ozawa, Shizuka Nakano, Chihiro Koyama, Hirohisa Oda, Takehiko Ishikawa, Yuki Watanabe, Taro Shimaoka, Shinsuke Suzuki

41 ( 2 ) 410201-1 - 410201-16 2024.04

Language：English Publishing type：Research paper (scientific journal)

Analysis Method for Recalescence Time Obtained Using High-Speed Camera for Solidification Experiments at the Electrostatic Levitation Furnace in the International Space Station Reviewed International journal

Yuji Mabuchi, Chihiro Hanada, Yuto Ueda, Koei Kadoi, Hirokazu Aoki, Ryosei Saguchi, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Shumpei Ozawa, Suguru Shiratori, Shizuka Nakano, Chihiro Koyama, Hirohisa Oda, Takehiko Ishikawa, Yuki Watanabe, Shinsuke Suzuki

41 ( 1 ) 410101-1 - 410101-11 2024.01

Language：English Publishing type：Research paper (scientific journal)

Crystallographic Textures of Al and Al-Mg Alloy Formed by Shot-Peening Reviewed International journal

Hisashi Sato, Mami Mihara-Narita, Yoshimi Watanabe, Satoshi Motozuka

Materials Science Forum 1106 41 - 47 2023.12

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (international conference proceedings)

DOI： 10.4028/p-OMIw3U

Effects of annealing on the interfacial microstructure and mechanical properties of explosively welded AZ80 magnesium alloy and A6005C aluminium alloy Invited Reviewed

Mami Mihara-Narita, Konosuke Asai, Hisashi Mori, Naobumi Saito, Yasumasa Chino, Hisashi Sato and Yoshimi Watanabe

Welding International 37 ( 10 ) 597 - 606 2023.10

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1080/09507116.2023.2228039

Structural modification of WC-Co cutting tools by laser doping treatment Reviewed

9 e19930-1 - e19930-12 2023.09

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.heliyon.2023.e19930

Evaluation of chemical–mechanical polishing of processed WC-Co surface structure Reviewed

351 135033-1 - 135033-4 2023.08

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.matlet.2023.135033

Deformation type during the ball milling process: A comparative study of the microstructures formed by ball milling, uniaxial compression, and rolling Reviewed

Syunsuke Fujita, Hisashi Sato, Satoshi Motozuka

Powder Technology 426 118598-1 - 118598-9 2023.08

Language：English Publishing type：Research paper (scientific journal)

DOI： doi.org/10.1016/j.powtec.2023.118598

Microstructure and strength of Ti-6Al-4V samples additively manufactured with TiC heterogeneous nucleation site particles Invited Reviewed

Yoshimi Watanabe, Shintaro Yamada, Tadachika Chiba, Hisashi Sato, Seiji Miura, Kenshiro Abe, Tomotsugu Kato

Materials 16 ( 17 ) 5974-1 - 5974-17 2023.08

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.3390/ma16175974

Suppression of bubble formation in levitated molten samples of Ti6Al4V with TiC for Hetero-3D at the international space station (ISS) Reviewed

Chihiro Hanada, Hirokazu Aoki, Yuto Ueda, Koei Kadoi, Yuji Mabuchi, Kanae Yoneda, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe, Yuma Harada, Shumpei Ozawa, Shizuka Nakano, Chihiro Koyama, Hirohisa Oda, Takehiko Ishikawa, Yuki Watanabe, Taro Shimaoka, and Shinsuke Suzuki

International Journal of Microgravity Science and Application 40 ( 3 ) 400301-1 - 400301-15 2023.07

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.15011/jasma.40.400301

遠心焼結鋳造法によるAl-(Al3Ti+Diamond)傾斜機能砥石の作製 Reviewed

渡辺義見，伊沢泰彦，山田素子，佐藤尚，國峯崇裕，柘植英明

日本複合材料学会誌 49 ( 4 ) 115 - 124 2023.07

Language：Japanese Publishing type：Research paper (scientific journal)

Atypical phase transformation behavior of Fe-33%Ni alloys induced by shot peening

Hisashi Sato, Takayuki Nishiura, Tomokazu Moritani, Yoshimi Watanabe

Surface & Coating Technology 462 129470-1 - 129470-11 2023.06

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： doi.org/10.1016/j.surfcoat.2023.129470

AZ80 マグネシウム合金 /A6005C アルミニウム合金爆発圧着材の接合界面組織および機械的性質に及ぼす焼鈍処理の影響 Reviewed

成田麻未，淺井康之介，森久史，斎藤尚文，千野靖正，佐藤尚，渡辺義見

溶接学会論文集 41 ( 1 ) 107 - 115 2023.02

Language：Japanese Publishing type：Research paper (scientific journal)

DOI： 10.2207/qjjws.41.107

Grain refinement of stainless steel by strontium oxide heterogeneous nucleation site particles during laser-based powder bed fusion Reviewed

Yoshimi Watanabe, Tomoki Yuasa, Hisashi Sato, Satoshi Okubo, Kengo Fujimaki

Journal of Materials Processing Technology 308 117700-1 - 117700-14 2022.10

Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.jmatprotec.2022.117700

Dissimilar joining of Mg/Al light metals by explosive welding Reviewed

Mami Mihara-Narita, Kounosuke Asai, Hisashi Mori, Yasumasa Chino, Hisashi Sato, Yoshimi Watanabe

Proceedings of IIW 2022 -International Conference on Welding and Joining- 360 - 363 2022.09

Language：English Publishing type：Research paper (international conference proceedings)

Improved cemented carbide tool edge formed by solid phase chemical-mechanical polishing Reviewed

Yayoi Tanaka, Hisashi Sato, Osamu Eryu

Journal of Materials Research and Technology 20 606 - 615 2022.09

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.jmrt.2022.07.077

Effects of strain-induced cyclic transformation on the microstructure of the peened surface of SUS 304 austenitic stainless steel Invited Reviewed

Yuji Nakagawara, Hisashi Sato, Tomokazu Moritani, Yoshimi Watanabe

Physica Status Solidi b 259 ( 9 ) 2100603-1 - 2100603-7 2022.08

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1002/pssb.202100603

Effects of interfacial interactions between metal and process control agents during ball milling on the microstructure of the milled Fe-based nanocrystalline alloy powder Reviewed

Satoshi Motozuka, Hisashi Sato, Hidenori Kuwata, Mitsuo Bito, Yasuo Okazaki

Heliyon 8 ( 8 ) e10325-1 - e10325-8 2022.08

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.heliyon.2022.e10325

マグネシウム合金/アルミニウム合金爆着クラッド材における界面の金属組織の特徴 Reviewed

成田麻未，森久史，佐藤尚，渡辺義見，斎藤直文，千野靖正，花野嘉紀，山田吉徳，箕田正，田中宏樹

軽金属溶接 60 ( 7 ) 288 - 295 2022.07

Language：Japanese Publishing type：Research paper (scientific journal)

Thermal stability of L1₂-modified Al_2.5Cu_0.5Ti particles in Al matrix Invited Reviewed

Manasi Shrikrishna Yadav, Yoshimi Watanabe, Hisashi Sato

Physica Status Solidi b 259 ( 9 ) 2100659-1 - 2100659-6 2022.05

Authorship：Last author Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1002/pssb.202100659

マグネシウム/アルミニウム合金爆発圧着材の界面組織，耐食性および機械的性質に及ぼすマグネシウム合金組成の影響 Reviewed

淺井康之介，成田麻未，佐藤尚，渡辺義見，森久史，斎藤尚文，中津川勲，千野靖正

軽金属 72 ( 5 ) 255 - 264 2022.05

Language：Japanese Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.2464/jilm.72.255

TiCヘテロ凝固核粒子添加による工業用純アルミニウム積層造形体の組織微細化 Reviewed

渡辺義見, 菅野浩行, 知場三周, 佐藤尚, 佐藤直子, 中野禅

軽金属 72 ( 5 ) 198 - 205 2022.05

Language：Japanese Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.2464/jilm.72.198

Interfacial microstructure and mechanical properties of explosively welded Mg/Al alloy plates Reviewed

Mami Mihara-Narita, Konosuke Asai, Hisashi Sato, Yoshimi Watanabe, Hisashi Mori, Naobumi Saito, Yasumasa Chino

Journal of Materials Engineering and Performance 31 ( 9 ) 7039 - 7048 2022.04

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1007/s11665-022-06843-z

Crystallographic texture and applications of pure Cu formed by shot peening Invited Reviewed

Hisashi Sato, Yuya Ito, Golap Kalita, Yoshimi Watanabe

Physica Status Solidi b 259 ( 9 ) 2100550-1 - 2100550-10 2022.03

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1002/pssb.202100550

Fabrication of metal matrix composites having thermally unstable reinforcements by spark plasma sintering method Reviewed

Yoshimi Watanabe, Yadav Manasi Shrikrishna, Hisashi Sato

Key Engineering Materials 907 130 - 135 2022.01

Authorship：Last author Language：English Publishing type：Research paper (international conference proceedings)

DOI： https://doi.org/10.4028/www.scientific.net/KEM.907.130

Effect of LD processing on cutting of cemented carbide tools Reviewed International journal

Yayoi Tanaka, Hisashi Sato, Osamu Eryu

ISSAT 2021 Proceedings 印刷中 2021.12

Language：English Publishing type：Research paper (international conference proceedings)

遠心力混合粉末法への適用に向けた3Dプリンター製石膏鋳型の溶浸，焼成条件の検討 Reviewed

渡辺義見, 長谷川宗平, 城井つくし, 山田素子, 知場三周, 佐藤尚

鋳造工学 93 ( 9 ) 525 - 531 2021.09

Language：Japanese Publishing type：Research paper (scientific journal)

DOI： 10.11279/jfes.93.525

Effects of solidification conditions on grain refinement capacity of TiC in directionally solidified Ti6Al4V alloy Reviewed International journal

Naoki Date, Shunya Yamamoto, Yoshimi Watanabe, Hisashi Sato, Shizuka Nakano, Naoko Sato, Shinsuke Suzuki

Metallurgical and Materials Transactions A 52A 3609 - 3627 2021.08

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1007/s11661-021-06333-2.pdf

Preparation of flake-shaped Fe-based nanocrystalline soft magnetic alloy particles subjected to plastic deformation Reviewed International journal

Satoshi Motozuka, Hisashi Sato, Hidenori Kuwata, Mitsuo Bito, Yasuo Okazaki

Philosophical Magazine Letters online published 2021.07

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1080/09500839.2021.1953713

Effects of Peening Direction on Reverse Transformation Induced by Shot-Peening for Fe-33%Ni Alloy Reviewed International journal

Hisashi Sato, Takuto Tominaga, Tadachika Chiba, Tomokazu Moritani, Yoshimi Watanabe

Materials Science Forum 1016 1252 - 1257 2021.01

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

TP-1 試験鋳型を用いたアルミニウム結晶粒微細化剤評価法の提案 Reviewed

渡辺義見, 鍵本亮, 岩田壮一郎, 山田素子, 成田麻未, 佐藤尚, 嶋﨑真一

軽金属 71 ( 1 ) 8 - 15 2021.01

Language：Japanese Publishing type：Research paper (scientific journal)

DOI： 10.2464/jilm.71.8

Changes in the spatial distributions of platelet Al₃Ti particles in an Al-Al₃Ti alloy by equal-channel angular pressing Reviewed International journal

Sarath Babu Duraisamy, Hisashi Sato, Yoshimi Watanabe

Materials Characterization 171 110757-1 - 110757-16 2021.01

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.matchar.2020.110757

Drilling Performance of Nano-Diamond Bonded SiC Composite Abrasives for CFRP Laminates by Dual-Axis Grinding Wheel System Reviewed International journal

Takahiro Kunimibe, Kazumasa Kurachi, Hideaki Tsuge, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe

Advanced Composite Materials 30 ( sup2 ) 1 - 16 2021

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1080/09243046.2020.1793052

Effect of lubricant milling aids on the recrystallization behavior and magnetic properties of ball-milled iron powders having (001) fiber texture for soft magnetic composite Reviewed International journal

Satoshi Motozuka, Yuki Mako, Hisashi Sato, Hirofumi Hojo, Yasuo Okazaki

Journal of Magnetism and Magnetic Materials 印刷中 2020.11

Language：English Publishing type：Research paper (scientific journal)

Interfacial effect between graphite and iron substrate on basal plane orientation and lubricity of graphite Reviewed International journal

Satoshi Motozuka, Hisashi Sato, Yasuji Muramatsu, Masahiko Morinaga

Tribology International 151 106455-1 - 106455-7 2020.11

Language：English Publishing type：Research paper (scientific journal)

Microstructural Stability of Ti based Composites Fabricated by Spark Plasma Sintering Reviewed International journal

Yoshimi Watanabe, Miwa Hattori, Tadachika Chiba and Hisashi Sato

MATEC Web of Conferences 321 ( 03023 ) 1 - 6 2020.10

Language：English Publishing type：Research paper (international conference proceedings)

DOI： 10.1051/matecconf/202032103023

高力黄銅製遠心鋳造材の機械的性質に及ぼす鋳型内に挿入した切削屑形状の影響 Reviewed

大矢泰正，船瀬貴広，佐藤尚，渡辺義見

鋳造工学 92 ( 9 ) 477 - 486 2020.09

Language：Japanese Publishing type：Research paper (scientific journal)

自動車端子用の銅合金上へのAg@Nano-Cハイブリッドめっきの諸特性に及ぼす影響因子 Reviewed

坂井田しずか，呉松竹，佐藤尚，日原岳彦，八代仁

銅と銅合金 59 ( 1 ) 270 - 275 2020.08

Language：Japanese Publishing type：Research paper (scientific journal)

3D visualization of top surface structure and pores of 3D printed Ti-6Al-4V samples manufactured with TiC heterogeneous nucleation site particles Reviewed International journal

Yoshimi Watanabe, Masafumi Sato, Tadachika Chiba, Hisashi Sato, Naoko Sato and Shizuka Nakano

Metallurgical and Materials Transactions A 51 1345 - 1352 2020.03

Language：English Publishing type：Research paper (scientific journal)

Three-dimensional analysis for distribution change of Al₃Ti platelet particles in Al-Al₃Ti composite deformed by asymmetric rolling Reviewed International journal

Hisashi Sato, Akihiro Mori, Mariko Kitagawa, Sarath Babu Duraisamy , Tadachika Chiba, Yoshimi Watanabe

JOM (The Journal of The Minerals, Metals & Materials Society) 72 ( 1 ) 57 - 64 2020.01

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Application of atmospheric-pressure plasma treatment to coat Ti-alloy orthodontic wire with white oxide layer Reviewed International journal

Naho Mitsuishi, Eri Miura-Fujiwara, Motoko Yamada, Tadachika Chiba, Hisashi Sato, Yoshimi Watanabe, Michiko Ito, Seigo Takashima, Masaaki Nakai, Toshikazu Akahori, Masaki Tanaka, Mitsuo Niinomi, Tsutomu Takeuchi

Japanese Journal of Applied Physics(JJAP) 59 SAAC09-1 - SAAC09-7 2020.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/1347-4065/ab43a9

Effects of Rolling Condition on Bond Interface Microstructure in Al-Mn Alloy/Al-Si Alloy Clad Sheets Reviewed International journal

Sho Tsuchihama, Hisashi Sato, Tadachika Chiba, Yoshimi Watanabe, Takashi Fujimura, Hitoshi Takayanagi

Proceedings of 14th INALCO (INALCO2019) 148 - 149 2019.11

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

The Microstructure Evolution and Grain Refining Performance of Al-Al3Ti Alloy by Equal-Channel Angular Pressing and Multi-Directional Forging Reviewed International journal

Sarath Babu Duraisamy, Hirohito Tsubouchi, Hisashi Sato, Yoshimi Watanabe

Proceedings of 14th INALCO (INALCO2019) 250 - 251 2019.11

Language：English Publishing type：Research paper (international conference proceedings)

Grain Refinement of Cast and 3D Printed Aluminum by Addition of Heterogeneous Nucleation Site Particles Reviewed International journal

Yoshimi Watanabe, Tadachika Chiba, Hisashi Sato

Proceedings of 14th INALCO (INALCO2019) 125 - 126 2019.11

Language：English Publishing type：Research paper (international conference proceedings)

Fragmentation process of platelet Al₃Ti particles in compressed Al-Al₃Ti alloy observed by serial sectioning and EBSD analysis Reviewed International journal

Sarath Babu Duraisamy, Hisashi Sato, Tadachika Chiba, Yoshimi Watanabe

Materials Research Express 6 096575 (8 pages) 2019.07

Language：Japanese Publishing type：Research paper (scientific journal)

Formation of compositional gradient in Al/SiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods Reviewed International coauthorship International journal

Saifulnizan Jamian, Hisashi Sato, Yoshimi Watanabe

Ceramics International 45 ( 7, Part B ) 9444 - 9453 2019.05

Language：English Publishing type：Research paper (scientific journal)

Fabrication of Al based composites by centrifugal mixed-powder method and their application for grinding wheels Reviewed International journal

Yoshimi Watanabe, Takayasu Sugiura, Tadachika Chiba, Hisashi Sato, Hideaki Tsuge

Journal of Materials Engineering and Performance 68 ( 7 ) 3852 - 3863 2019.02

Language：English Publishing type：Research paper (scientific journal)

Formation of (001) fiber texture in iron powder and its effect on magnetic properties and crystal orientation of the powder compact Invited Reviewed International journal

Satoshi Motozuka, Syuma Iwai, Hisashi Sato, Hirofumi Hojo, Yasuo Okazaki, Masahiko Morinaga

ISIJ International 59 ( 1 ) 192 - 200 2019.01

Language：English Publishing type：Research paper (scientific journal)

Fabrication of grain refiners with a high volume fraction of Al_2.7Fe_0.3Ti heterogeneous nucleation site particles by spark plasma sintering Reviewed International journal

Yoshimi Watanabe, Syusuke Taniai, Hisashi Sato

Japanese Journal of Applied Physics 58 ( S1 ) SAAC04-1SAAC04-9 - SAAC04-9 2019.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/1347-4065/aaea69

繰返し押出加工，多軸鍛造，等速圧延および異周速圧延によるAl–7%Si–1%Fe合金中の板状β-AlFeSi金属間化合物粒子の破砕 Reviewed

鍵本亮, 山田素子, 佐藤尚, 渡辺義見, 山中昇

軽金属 68 ( 12 ) 673 - 676 2018.12

Language：Japanese Publishing type：Research paper (scientific journal)

Three-dimensional microstructural analysis of fragmentation behavior ofplatelet Al₃Ti particles in Al-Al₃Ti composite deformed by equal-channel angular pressing Reviewed International journal

Hisashi Sato, Yoshimi Watanabe

Materials Characterization 144 305 - 315 2018.10

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

金属粉末の高密度充填化と積層造形技術への応用 Reviewed

渡辺義見, 小寺諒, 佐藤尚

Journal of Functionally Graded Materials 32 7 - 12 2018.09

Language：English Publishing type：Research paper (scientific journal)

Fabrication of Ni-Aluminides Long-Fiber Reinforced Ni Matrix Composite by a Reaction at Narrow Holes Method Reviewed International journal

Yoshimi Watanabe, Shingo Gonda, Hisashi Sato, Seiji Miura

Journal of Materials Processing Technology 259 320 - 331 2018.09

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.jmatprotec.2018.02.032

Drilling CFRP Laminates by Dual-axis Grinding Wheel System with Copper/Diamond Functionally Graded Grinding Wheel Reviewed International journal

Takahiro Kunimine, Hideaki Tsuge, Daisuke Ogawa, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe

Journal of Manufacturing Science and Engineering 140 ( 7 ) 071011-1 - 071011-7 2018.07

Language：English Publishing type：Research paper (scientific journal)

Grain refinement of pure Al using Al_⁠2.5Cu_⁠0.5Ti particles with an L1⁠₂ structure International journal

Yoshimi Watanabe, Ryosuke Yamazaki, Kunika Yamanaka, Hisashi Sato

Journal of Materials Processing Technology 255 400 - 410 2018.05

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.jmatprotec.2017.11.047

多軸鍛造を施したAl-Al₃Ti複相材料のAl₃Ti粒子分布に及ぼす鍛造温度の影響 Invited Reviewed

佐藤尚，手島史貴，渡辺義見

軽金属 68 ( 1 ) 2 - 8 2018.01

Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)

Effects of shot-peening and atmospheric-pressure plasma on aesthetic improvement of Ti–Nb–Ta–Zr alloy for dental applications Reviewed International journal

Eri Miura-Fujiwara, Yuu Suzuki, Michiko Ito, Motoko Yamada, Simpei Matsutake, Naritake Takahima, Hisashi Sato, Yoshimi Watanabe

Japanese Journal of Applied Physics 57 ( 1S ) 01AG05 - (8 pages) 2018.01

Language：English Publishing type：Research paper (scientific journal)

Formation of L1₂ Modified Al_2.5Cu_0.5Ti Phase by Heat Treatment of Spark Plasma Sintered Cu/Al₃Ti Specimens Reviewed International journal

Yoshimi Watanabe, Kazuaki Hirata, Hisashi Sato

Japanese Journal of Applied Physics 57 ( 1S ) 01AF04 - (8 pages) 2018.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/JJAP.57.01AF04

Heterogeneous Nucleation of alpha-Al Primary Crystal on L1₂ Modified Al_2.7Ni_0.3Ti Phase Reviewed International journal

Yoshimi Watanabe, Kazunori Maekawa, Hisashi Sato

Japanese Journal of Applied Physics 57 ( 1S ) 01AF08 - (6 pages) 2018.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/JJAP.57.01AF08

(Fe_1-xV_x)₃Al異質凝固核粒子添加によるアルミニウム鋳造材の結晶粒微細化 Reviewed

渡辺義見, 山崎良輔, 知場三周, 佐藤尚

鋳造工学 90 ( 1 ) 3 - 10 2018.01

Language：Japanese Publishing type：Research paper (scientific journal)

Influence of Heat Treatment on Interface Structure of Stainless Steel/Gray Iron Bimetallic Layered Castings Reviewed International coauthorship International journal

M. Ramadan, K. M. Hafez, K. S. Abdel Halim, N. Fathy, T. Chiba, H. Sato and Y. Watanabe

Applied Mechanics and Materials 873 3 - 8 2017.11

Language：English Publishing type：Research paper (scientific journal)

Effects of Heterogeneous nucleation site particles on formability and microstructure of additive manufactured Ti-6Al-4V samples Reviewed International journal

Yoshimi Watanabe, Masafumi Sato, Tadachika Chiba, Hisashi Sato, Naoko Sato, Shizuka Nakano

Proceedings of the Biomaterials International 2017 1160-1 - 1160-2 2017.08

Language：English Publishing type：Research paper (international conference proceedings)

Oxidation of Ti-Nb-Ta-Zr Alloy by Atmospheric Pressure Plasma Treatment Reviewed International journal

Eri Miura-Fujiwara, Shimpei Matsutake, Yuu Suzuki, Ito Michiko, Motoko Yamada, Seigo Takashima, Hisashi Sato, Yoshimi Watanabe

Proceedings of the Biomaterials International 2017 1143-1 - 1143-2 2017.08

Language：English Publishing type：Research paper (international conference proceedings)

Formation process of the {001} fiber texture on iron particles using simple ball milling Reviewed International journal

S. Motozuka, T. Ikeda, T. Miyagawa, H. Sato and M. Morinaga

Powder Technology 321 9 - 12 2017.08

Language：English Publishing type：Research paper (scientific journal)

ガスアトマイズ法により作製した球状Al₃Ti添加によるアルミニウム鋳造材の結晶粒微細化 Reviewed

渡辺義見，平子孝明，知場三周，佐藤　尚

軽金属 67 ( 6 ) 208 - 213 2017.06

Language：Japanese Publishing type：Research paper (scientific journal)

Microstructure of Al-Al₃Ti functionally graded materials fabricated by centrifugal solid-particle method and centrifugal in-situ method Reviewed International journal

Yoshimi Watanabe, Qi Zhou, Hisashi Sato, Toshiyuki Fujii, Tomonari Inamura

Japanese Journal of Applied Physics 56 ( 1S ) 01AG01-1 - 01AG01-11 2017.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/JJAP.56.01AG01

Effects of work-hardening rate on formation of nanocrystallized subsurface layer in Cu alloys Reviewed International journal

Hisashi Sato, Yuya Kaneko, Yoshimi Watanabe

Japanese Journal of Applied Physics 56 ( 1S ) 01AE05-1 - 01AE05-5 2017.01

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Decomposition of Al_2.7Fe_0.3Ti in heated Al–Al_2.7Fe_0.3Ti reﬁner fabricated by spark plasma sintering and its reﬁning performance Reviewed International journal

Yoshimi Watanabe, Takayuki Hamada, Hisashi Sato

Japanese Journal of Applied Physics 56 01AG02-1 - 01AG02-7 2017.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/JJAP.56.01AG02

遠心焼結鋳造法にて作製した銅基ダイヤモンド傾斜機能材料のCFRP穿孔加工性能の評価 Reviewed

國峯崇裕, 柘植英明, 小川大介, 山田素子, 佐藤尚, 渡辺義見

銅と銅合金 56 ( 1 ) 227 - 231 2017.01

Language：Japanese Publishing type：Research paper (scientific journal)

Microstructure and wear property of Al-Al₃Ti FGMs fabricated by centrifugal solid-article and in-situ methods Reviewed International journal

Yoshimi Watanabe, Qi Zhou, Hisashi Sato

Conference paper for the ISFMGs 2016 134 - 137 2016.09

Language：English Publishing type：Research paper (international conference proceedings)

Grain refinement performance of pure Al by unstable nucleation sites Reviewed

Yoshimi Watanabe, Hisashi Sato

Proceedings of The 9th Pacific Rim International Conference on Advanced Materials and Processing, PRICM 2016 332 - 337 2016.08

Language：English Publishing type：Research paper (international conference proceedings)

Fabrication of Fe-Mn-Si-Cr shape memory alloy Fiber/Aluminum matrix smart composite Induced by shape memory effect Reviewed International journal

Yoshimi Watanabe, Akihiro Yamamura, Hisashi Sato

Materials Transactions 57 ( 5 ) 590 - 599 2016.05

Language：English Publishing type：Research paper (scientific journal)

Investigation of continuous deformation behavior around initial yield point of single crystal copper by using micro scale torsion test Reviewed International journal

Kozo Koiwa, Nobuyuki Shishido, Chuantong Chen, Masaki Omiya, Shoji Kamiya, Hisashi Sato, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Toshiaki Suzuki, Takeshi Nokuo

Scripta Materialia 111 ( 15 ) 94 - 97 2016.01

Language：English Publishing type：Research paper (scientific journal)

Fabrication of novel Al–L1₂-type Al_2.7Fe_0.3Ti refiners by spark plasma sintering and their refining performance Reviewed International journal

Yoshimi Watanabe, Takayuki Hamada, Hisashi Sato

Japanese Journal of Applied Physics 55 ( 1S ) 01AG01-1 - 01AG01-10 2016.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/JJAP.55.01AG01

Aluminum matrix texture in Al–Al₃Ti functionally graded materials analyzed by electron back-scattering diffraction Reviewed International journal

Yoshimi Watanabe, Paulo D. Sequeira, Hisashi Sato, Tomonari Inamura, Hideki Hosoda

Japanese Journal of Applied Physics 55 ( 1S ) 01AG03-1 - 01AG03-7 2016.01

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/JJAP.55.01AG03

Nanocrystallized layer formed by sliding wear under high stress for pure Cu Reviewed International journal

Hisashi Sato, Ryo Tsuzuki, Yuya Kaneko, Yoshimi Watanabe

Japanese Journal of Applied physics 55 ( 1S ) 01AE08-1 - 01AE08-7 2016.01

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7567/JJAP.55.01AE08

Thermo-mechanical training of stainless steels to improve damping capacity Reviewed International journal

Yoshimi Watanabe, Naoya Iwata, Hisashi Sato

Materials Science Forum 879 101 - 106 2016

Language：English Publishing type：Research paper (scientific journal)

Effects of particle size on fabrication of Al-TiO₂ functionally graded materials by centrifugal mixed-powder method Reviewed International journal

Hisashi Sato, Junya Maeda, Motoko Yamada, Yoshimi Watanabe

Materials Science Forum 879 1691 - 1697 2016

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Reverse transformation behavior induced by shot-peening for SUS410S martensitic stainless steel Reviewed International journal

Nagomi Tsuboi, Serika Higa, Hisashi Sato, Yoshimi Watanabe

Materials Science Forum 879 2003 - 2007 2016

Language：English Publishing type：Research paper (scientific journal)

Distribution of microstructure and cooling rate in Al–Al₂Cu functionally graded materials fabricated by a centrifugal method Reviewed

Yoshimi Watanabe, Yuko Hattori, Hisashi Sato

Journal of Materials Processing Technology 221 197 - 204 2015.07

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.jmatprotec.2015.01.028

Temperature dependence of reverse transformation induced by shot-peening for SUS 304 austenitic stainless steel Reviewed International journal

Hisashi Sato, Ai Namba, Mayumi Okada, Yoshimi Watanabe

Materials Today: Proceedings 25 5707 - 5710 2015.07

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

(技術論文)遠心力を用いた傾斜機能材料製造装置の開発 Reviewed

大矢泰正，瀬戸口正嵩，服部祐幸，岩田直也，佐藤尚，渡辺義見

傾斜機能材料論文集 29 1 - 7 2015.03

Language：Japanese Publishing type：Research paper (scientific journal)

Fabrication of copper/diamond functionally graded materials for grinding wheels by centrifugal sintered-casting Reviewed International journal

Takahiro Kunimine, Masafumi Shibuya, Hisashi Sato, Yoshimi Watanabe

Journal of Materials Processing Technology 217 294 - 301 2015.03

Language：English Publishing type：Research paper (scientific journal)

結晶粒微細化により母材を強化した複合砥粒傾斜機能砥石の製造とそれによるCFRP の穴あけ加工 Reviewed

谷口和也，佐藤尚，渡辺義見，倉知一正，柘植英明

傾斜機能材料論文集 28 1 - 8 2014.12

Language：Japanese Publishing type：Research paper (scientific journal)

Local distribution of residual stress of Cu in LSI interconnect Reviewed

Hisashi Sato, Nobuyuki Shishido, Shoji Kamiya, Kozo Koiwa, Masaki Omiya, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Takeshi Nokuo

Materials Letters 136 362 - 365 2014.12

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Fabrication of copper/diamond functionally graded materials for grinding wheels by centrifugal sintered-casting Reviewed

Takahiro Kunimine, Masafumi Shibuya, Hisashi Sato, Yoshimi Watanabe

Journal of Materials Processing Technology 217 294 - 301 2014.11

Language：English Publishing type：Research paper (scientific journal)

Effects of wear conditions on formation of wear-induced layer in Fe alloys Reviewed

Hisashi Sato, Yuya kaneko, Yoshimi Watanabe

Proceedings Book The 4th International Symposium on Steel Science (ISSS-2014) 151 - 154 2014.11

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Specimen size effect on elastic-plastic strength evaluation of interface between thin films Reviewed

Chuantong Chen, Kozo Koiwa, Nobuyuki Shishido, Shoji Kamiya, Masaki Omiya, Hisashi Sato, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Takeshi Nokuo, Tadahiro Nagasawa

Engineering Fracture Mechanics 131 371 - 381 2014.11

Language：English Publishing type：Research paper (scientific journal)

Crystal orientation effect on local adhesion strength of the interface between a damascene copper line and the insulation layer Reviewed

Nobuyuki Shishido, Yuka Oura, Hisashi Sato, Shoji Kamiya, Kozo Koiwa, Masaki Omiya, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Takeshi Nokuo, Toshiaki Suzuki,

Microelectronic Engineering 120 71 - 76 2014.05

Language：English Publishing type：Research paper (scientific journal)

Fabrication of self-lubricating Cu-based composite containing graphite particle by centrifugal mixed-powder casting Reviewed

Hisashi Sato, Wei Wei, Kazuaki Oguri, Motoko Yamada, Yoshimi Watanabe

Materials Science Forum 783-786 1579 - 1584 2014.05

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Microstructural evolution of martensite phase in Fe-Ni alloy depending on temperature of tensile deformation Reviewed

Takanori Sonoda, Hisashi Sato, Tomokazu Moritani, Yoshimi Watanabe

Advanced Materials Research 922 716 - 721 2014.05

Language：English Publishing type：Research paper (international conference proceedings)

Grain Refinement of Al Cast by Novel Al-Al_2.5Cu_0.5Ti Refiner Reviewed

Kunika Yamanaka, Hisashi Sato, Yoshimi Watanabe

Materials Science Forum 783-786 276 - 281 2014.05

Language：English Publishing type：Research paper (international conference proceedings)

α およびβ 黄銅切削屑を利用した遠心鋳造材の組織微細化能 Reviewed

渡辺義見，船瀬貴広，佐藤尚，大矢泰正

日本金属学会誌 78 ( 2 ) 61 - 67 2014.02

Language：Japanese Publishing type：Research paper (scientific journal)

Fragmentation Behavior of Al₃Ti Particles in Al-Al₃Ti Composite Deformed by Friction Stir Processing Reviewed

Hisashi Sato, Yoshito Miyamoto, Yoshimi Watanabe, Yasuaki Naito and Tetsuro Nose

Proceedings of the 1st International Joint Symposium on Joining and Welding 453 - 457 2013.11

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Grain Refinement of As-Cast Pure Al by Cold-Rolled Al-Ti Alloy Refiner Reviewed

Hisashi Sato, Kentaro Ota, Motoo Furukawa, Miki Azuma, Yoshimi Watanabe, Zuogui Zhang and Kaneaki Tsuzaki

Materials Transactions 54 ( 9 ) 1554 - 1561 2013.09

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Microstructure Refinement of Pure Aluminum by Inoculation with Stainless Steel Powders Reviewed

Hideaki Tsukamoto, Yoshiki Komiya, Naoki Oshima, Hisashi Sato, Yoshimi Watanabe

Applied Mechanics and Materials 421 272 - 276 2013.09

Language：English Publishing type：Research paper (scientific journal)

3-dimensional microstructural evaluation of wear-induced layer in Al–Al₃Ti functionally graded materials by serial sectioning Reviewed

Hisashi Sato, Yusuke Noda, Yoshimi Watanabe

Materials Transactions 54 ( 8 ) 1274 - 1280 2013.08

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Grain Refinement of Al Cast by Al₅CuTi₂, Al₂₂Fe₃Ti₈ and Al₆₇Ni₈Ti₂₅ Intermetallic Compounds with L12 Structure Reviewed

Yoshimi Watanabe, Kunika Yamanaka , Takahiro Kunimine, Hisashi Sato

Proceedings of The 8th Pacific Rim International Conference on Advanced Materials and Processing, TMS (The Minerals, Metals & Materials Society) 2297 - 2305 2013.08

Language：English Publishing type：Research paper (international conference proceedings)

Effects of Thermal Conductivity of Matrix on Wear Behavior of Metal-Based Composite Reviewed

Hisashi Sato, Vu Dinh Hai, Motoko Yamada and Yoshimi Watanabe

Proceedings of The 8th Pacific Rim International Conference on Advanced Materials and Processing, TMS (The Minerals, Metals & Materials Society) 2325 - 2330 2013.08

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Damping Capacity of Fe-17mass%Mn High Damping Alloy with Variant Controlled Microstructure Reviewed

Yoshimi Watanabe, Yuusuke Suga, Hisashi Sato, Hideaki Tsukamoto and Yoichi Nishino

Materials Transactions 54 ( 8 ) 1288 - 1294 2013.08

Language：English Publishing type：Research paper (scientific journal)

切削屑を添加した遠心鋳造法による高力黄銅パイプの開発 Reviewed

大矢泰正，船瀬貴広，佐藤尚，渡辺義見

鋳造工学 85 ( 5 ) 273 - 279 2013.05

Language：Japanese Publishing type：Research paper (scientific journal)

Formation Behavior of Continuous Graded Composition in Ti-ZrO₂ Functionally Graded Materials Fabricated by Mixed-Powder Pouring Method Reviewed

Murali Jayachandran, Hideaki Tsukamoto, Hisashi Sato, Yoshimi Watanabe

Journal of Nanomaterials 2013 504631-1 - 504631-8 2013.05

Language：English Publishing type：Research paper (scientific journal)

切削屑添加による鋳造アルミニウムの結晶粒微細 Reviewed

田伏賢一，佐藤尚，渡辺義見

軽金属 63 ( 4 ) 147 - 153 2013.04

Language：Japanese Publishing type：Research paper (scientific journal)

Development of Cu/Insulation Layer Interface Crack Extension Simulation with Crystal Plasticity Reviewed

Kozo Koiwa, Masaki Omiya, Nobuyuki Shishido, Shoji Kamiya, Hisashi Sato, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Toshiaki Suzuki, Takeshi Nokuo

Japanese Journal of Applied Physics 52 04CB05-1 - 04CB05-7 2013.04

Language：English Publishing type：Research paper (scientific journal)

Creep analysis of functionally graded material thick-walled cylinder Reviewed

Saifulnizan Jamian, Hisashi Sato, Hideaki Tsukamoto, Yoshimi Watanabe

Applied Mechanics and Materials 315 867 - 871 2013.03

Language：English Publishing type：Research paper (scientific journal)

Formation process of wear-induced layer in Fe-33%Ni alloy Reviewed

Hisashi Sato, Yuuki Fuseya, Takahiro Kunimine, Yoshimi Watanabe

Proceedings book of the 3rd international symposium on steel science (ISSS2012) 199 - 202 2013.03

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Heterogeneous nucleation of pure magnesium on Al₃Ti, TiC, TiB₂ and AlB₂ particles Reviewed

Yoshimi Watanabe, Yan Bing Gao, Jun Qing Guo, Hisashi Sato, Seiji Miura, Hiromi Miura

Japan Journal of Applied Physics 52 ( 1 ) 01AN04-1 - 01AN04-7 2013.01

Language：English Publishing type：Research paper (scientific journal)

Grain-scale adhesion strength mapping of copper wiring structures in integrated circuits Reviewed

Shoji Kamiya, Nobuyuki Shishido, Shinsuke Watanabe, Hisashi Sato, Kozo Koiwa, Masaki Omiya, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Takeshi Nokuo, and Tadahiro Nagasawa

Surface and Coatings Technology 215 280 - 284 2013.01

Language：English Publishing type：Research paper (scientific journal)

Oxidation behavior and effect of layer thickness on whiteness and exfoliation behavior of oxide film formed on Ti-Nb-Ta-Zr alloy Reviewed

E. Miura-Fujiwara, S. Yamada, A. Obata, H. Sato, Y. Watanabe, T. Kasuga and M. Niinomi

Proceedings of Ti-2011 conference 3 2116 - 2120 2012.09

Language：English Publishing type：Research paper (international conference proceedings)

Investigation of wear anisotropy in severely plastically deformed Al-Al₃Ti composites Reviewed

Shimaa Hassan El-Hadad, Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe

Metallurgical and Materials Transactions A 43 ( 9 ) 3249 - 3256 2012.09

Language：English Publishing type：Research paper (scientific journal)

遠心力混合粉末法による傾斜機能材料製造とその工業的応用 Reviewed

渡辺義見，佐藤　尚

粉体および粉末冶金 59 ( 7 ) 397 - 404 2012.07

Language：Japanese Publishing type：Research paper (scientific journal)

3-dimensional microstructure of Al-Al₃Ti alloy severely deformed by ECAP Reviewed

Hisashi Sato, Takahisa Hishikawa, Yuuki Makino, Takahiro Kunimine, Yoshimi Watanabe

Proceedings of the 13th International Conference on Aluminum Alloys 1575 - 1580 2012.06

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Development of copper/diamond functionally graded grinding wheel for CFRP drilling by centrifugal sintered-casting method Reviewed

Takahiro Kunimine, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe

Proceedings of the 13th International Conference on Aluminum Alloys 189 - 194 2012.06

Language：English Publishing type：Research paper (international conference proceedings)

仮焼結を利用した遠心力混合粉末法による金属基ダイヤモンド傾斜機能砥石の創製 Reviewed

澁谷将史，佐藤尚，三浦永理，渡辺義見

傾斜機能材料論文集 25 1 - 6 2012.05

Language：Japanese Publishing type：Research paper (scientific journal)

遠心力を用いた傾斜機能材料製造装置の開発 Reviewed

大矢泰正，瀬戸口正嵩，佐藤尚，渡辺義見

傾斜機能材料論文集 25 68 - 74 2012.05

Language：Japanese Publishing type：Research paper (scientific journal)

反応遠心力混合粉末法を利用したマグネシウム基傾斜機能材料の製造 Reviewed

渡辺義見，澁谷将史，佐藤尚，三浦永理，川森重弘

軽金属 62 ( 4 ) 153 - 159 2012.04

Language：Japanese Publishing type：Research paper (scientific journal)

Fabrication of TiO₂ Coated Cotton-Yarn as High-Dielectric-Constant Fiber for 3-D Photonic Crystal Application Reviewed

Motoo Furukawa, Hisahi Sato, Yoshimi Watanabe

Transactions of the Materials Research Society of Japan 37 ( 1 ) 印刷中 - 印刷中 2012.03

Language：English Publishing type：Research paper (scientific journal)

Formation behavior of wear-induced layer in Fe-Ni alloys Invited Reviewed

Hisashi Sato, Yuichi Kubota, Eri Miura-Fujiwara, Yoshimi Watanabe

Transactions of the Materials Research Society of Japan 37 ( 1 ) 印刷中 - 印刷中 2012.03

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Design of ZrO₂/Ti functionally graded thermal barreir coatings basesd on a nonlinear micromechanical approarch Reviewed

Hideaki Tsukamoto, Hisashi Sato, Yoshimi Watanabe

Applied Mechanics and Materials 152-154 167 - 170 2012.01

Language：English Publishing type：Research paper (scientific journal)

Effects of Dispersoids on Wear Behavior of Cu-Based Nanocomposite Containing SiO₂ Nanoparticles Reviewed

Hisashi Sato, Eri Miura-Fujiwara, Yoshimi Watanabe

Japanese Journal of Applied Physics 51 01AK01-1 - 01AK01-6 2012.01

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Experimental Study on Severe Plastic Deformation of Ti by Novel Equal-Channel Angular Pressing Reviewed

Saifulnizan Jamian, Hisashi Sato, Eri Miura-Fujiwara, Yoshimi Watanabe

Japanese Journal of Applied Physics 51 01AK04-1 - 01AK04-7 2012.01

Language：English Publishing type：Research paper (scientific journal)

Fabrication of Functionally Graded Grinding Wheel by a Centrifugal Mixed-Powder Method for CFRP-Drilling Applications Reviewed

Yoshimi Watanabe, Eri Miura-Fujiwara, Hisashi Sato, Kunio Takekoshi, Hideaki Tsuge, Tadashi Kaga, Naoyuki Bando, Shigemasa Yamagami, Kazumasa Kurachi and Hisanori Yokoyama

International Journal of Materials and Product Technology 42 ( 1/2 ) 29 - 45 2011.12

Language：English Publishing type：Research paper (scientific journal)

Training Effects on Damping Capacity in Mn-22.5mass%Cu-5mass%Ni-2mass%Fe Alloy Reviewed

Yoshimi Watanabe, Yuusuke Suga, Eri Miura-Fujiwara, Hisashi Sato and Yoichi Nishino

Materials Science Forum 706-709 2026 - 2031 2011.11

Language：English Publishing type：Research paper (scientific journal)

Phase Transformation in Fe Alloys Induced by Surface Treatments Reviewed

Hisashi Sato, T. Nishiura, Eri Miura-Fujiwara and Yoshimi Watanabe

Materials Science Forum 706-709 1996 - 2001 2011.11

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Fabrication of Metal-based Functionally Graded Grinding Wheel by a Centrifugal Mixed-Powder Method Reviewed

Eri Miura-Fujiwara, Hisashi Sato, Motoko Yamada, Yoshimi Watanabe

Materials Science Forum 706-709 661 - 666 2011.11

Language：English Publishing type：Research paper (scientific journal)

複相材料への巨大ひずみ加工にて形成する微細組織の3次元可視化 Invited

佐藤尚，菱川貴久，牧野有紀，國峯崇裕，渡辺義見

材料研究に役立つ3D4D解析　 ( 　 ) 26 - 31 2011.09

Authorship：Lead author Language：Japanese Publishing type：Research paper (other academic)

Microstructures and Mechanical Properties of Titanium / Biodegradable-polymer FGM for Bone Tissue Fabricated by Spark Plasma Sintering Method Reviewed

Yoshimi Watanabe, Yoshimi Iwasa, Hisashi Sato, Akira Teramoto Koji Abe and Eri Miura-Fujiwara

Journal of Materials Processing Technology 211 1919 - 1926 2011.09

Language：English Publishing type：Research paper (scientific journal)

Cold model for process of Ni-aluminides/Steel clad pipe by a reactive centrifugal casting method Reviewed

Yoshimi Watanabe, Yoshifumi Inaguma, Hisashi Sato

Materials Letters 65 467 - 470 2011.01

Language：English Publishing type：Research paper (scientific journal)

Finite Element Analysis of Severe Plastic Deformation of Difficult-to-work Material by Equal-Channel Angular Pressing at Ambient Temperature Reviewed

Saifulnizan Jamian, Hisashi Sato, Eri Miura-Fujiwara, Yoshimi Watanabe

Japan Journal of Applied Physics 50 ( 1 ) 01AJ06-1 - 01AJ06-5 2011.01

Language：English Publishing type：Research paper (scientific journal)

Fabrication of Al/Al₃Ti Functionally Graded Materials by Reaction Centrifugal Mixed-Powder Method Reviewed

Shimaa El-Hadad, Hisashi Sato, Eri Miura-Fujiwara, Yoshimi Watanabe

Japan Journal of Applied Physics 50 ( 1 ) 01AJ02-1 - 01AJ02-7 2011.01

Language：English Publishing type：Research paper (scientific journal)

Al-Al₂Cu共晶組織のラメラ間隔を利用した遠心力法製造時における冷却速度分布の推算 Reviewed

服部祐幸，佐藤尚，三浦永理，渡辺義見

傾斜機能材料論文集 24 ( 　 ) 17 - 22 2010.12

Language：Japanese Publishing type：Research paper (scientific journal)

遠心力混合粉末法によるMg-Si系傾斜機能材料の創製 Reviewed

澁谷将史，佐藤尚，三浦永理，渡辺義見，川森重弘

傾斜機能材料論文集 24 ( 　 ) 11 - 16 2010.12

Language：Japanese Publishing type：Research paper (scientific journal)

遠心力混合粉末法によるCFRP加工用Cu-ナノダイヤモンド系傾斜機能砥石の作製 Reviewed

間宮佑太，佐藤尚，三浦永理，渡辺義見，倉知一正，横山久範

傾斜機能材料論文集 24 5 - 10 2010.12

Language：Japanese Publishing type：Research paper (scientific journal)

Wear of Al/Al₃Zr functionally graded materials fabricated by centrifugal solid-particle method Reviewed

Shimaa El-Hadad, Hisashi Sato, Yoshimi Watanabe

Journal of Materials Processing Technology 210 ( 15 ) 2245 - 2251 2010.11

Language：English Publishing type：Research paper (scientific journal)

Flexible photonic crystal via Alumina ball inserted teflon tube Invited Reviewed

Yoshimi Watanabe, Takahiro Hotta, Hisashi Sato

Applied Physics A 100 ( 4 ) 981 - 985 2010.09

Language：English Publishing type：Research paper (scientific journal)

Fabrication of Al-Al₃Ti/Ti₃Al functionally graded materials under a centrifugal force Reviewed

Shimaa El-Hadad, Hisashi Sato, Eri Miura-Fujiwara and Yoshimi Watanabe

Materials 3 4639 - 4656 2010.09

Language：English Publishing type：Research paper (scientific journal)

Anisotropic mechanical properties of ECAPed Al-5%Zr containing platelet particles Reviewed

Shimaa El-Hadad, Hisashi Sato, Yoshimi Watanabe

Materials Science and Engineering A 527 ( 18-19 ) 4674 - 4679 2010.07

Language：English Publishing type：Research paper (scientific journal)

Grain refinement performance of Al cast using machining chips Reviewed

Yoshimi Watanabe, Kenichi Tabushi, Hisashi Sato, Eri Miura-Fujiwara

Materials Science Forum 654-656 1444 - 1447 2010.07

Language：English Publishing type：Research paper (scientific journal)

Effects of phase transformation temperature on formation of wear-induced layer in Fe-Ni alloys Reviewed

Hisashi Sato, Yuichi Kubota, Eri Miura-Fujiwara, Yoshimi Watanabe

Materials Science Forum 654-656 1227 - 1230 2010.07

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Fabrication of Ti-based Biodegradable Material Composites Prepared by Spark Plasma Sintering Method Reviewed

Eri Miura-Fujiwara, Takeshi Teramoto, Hisashi Sato, Equo Kobayashi, Yoshimi Watanabe

Materials Science Forum 654-656 2158 - 2161 2010.07

Language：English Publishing type：Research paper (scientific journal)

Fabrication of Cu-based functionally graded materials dispersing fine SiC particles by a centrifugal mixed-powder method Reviewed

H. Sato, Y. Inaguma, Y. Watanabe

Materials Science Forum 638-642 2160 - 2165 2010.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Development of compositional gradient simulation for centrifugal slurry-pouring methods Reviewed

K. Kinoshita, H. Sato, Y. Watanabe

Materials Science Forum 631-632 455 - 460 2010.04

Language：English Publishing type：Research paper (scientific journal)

Effect of casting condition on density and hardness gradients of Al-Al₂Cu alloy FGM fabricated by centrifugal in-situ method Reviewed

K. Tabushi, H. Sato, Y. Watanabe

Materials Science Forum 631-632 449 - 454 2010.04

Language：English Publishing type：Research paper (scientific journal)

Fabrication of Al-based FGM containing TiO₂ nano-particles by a centrifugal mixed-powder method Reviewed

Y. Inaguma, H. Sato, Y. Watanabe

Materials Science Forum 631-632 441 - 447 2010.04

Language：English Publishing type：Research paper (scientific journal)

Investigation of the mechanical properties in Al/Al₃Zr FGMs fabricated by centrifugal casting method Reviewed

S. H.El-Hadad, H. Sato, Y. Watanabe

Materials Science Forum 631-632 379 - 384 2010.04

Language：English Publishing type：Research paper (scientific journal)

Effects of the processing temperature of centrifugal casting on the mechanical properties of Al-Al₃Ti FGMs Reviewed

S. H.El-Hadad, H. Sato, P. D.Sequeira, Y. Watanabe, Y. O.-Seimiya

Materials Science Forum 631-632 373 - 378 2010.04

Language：English Publishing type：Research paper (scientific journal)

Fabrication of titanium / biodegradable-polymer FGM for medical application Reviewed

Y. Watanabe, Y. Iwasa, H. Sato, A. Teramoto, K. Abe

Materials Science Forum 631-632 199 - 204 2010.04

Language：English Publishing type：Research paper (scientific journal)

Training effects on damping capacity in Fe-Mn and Fe-Mn-Cr alloys Reviewed

Y. Watanabe, H. Sato, Y. Nishino, I-S. Kim

Materials Science Forum 638-642 2201 - 2206 2010.04

Language：English Publishing type：Research paper (scientific journal)

Evaluation of particle size and shape distributions in Al-Al₃Ni functionally graded materials fabricated by a semi-solid forming Reviewed

K. Matsuda, Y. Watanabe, H. Sato, I-S. Kim, Y. Fukui

International Journal of Materials and Product Technology 39 ( 1-2 ) 108 - 121 2010.01

Language：English Publishing type：Research paper (scientific journal)

A novel fabrication method for functionally graded materials under centrifugal force:The centrifugal mixed-powder method Reviewed

Y. Watanabe, Y. Inaguma, H. Sato, E. M.-Fujiwara

Materials 2 2510 - 2525 2009.12

Language：English Publishing type：Research paper (scientific journal)

In-situ observation of butterfly-type martensite in Fe-30wt.%Ni alloy during tensile test using high-resolution EBSD Reviewed

H. Sato, S. Zaefferer, Y. Watanabe

ISIJ International 49 ( 11 ) 1784 - 1791 2009.11

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Microstructure and mechanical properties of wear-induced layer in Fe-Ni alloys Reviewed

H. Sato, Y. Kubota, E. M.-Fujiwara, Y. Watanabe

Proceedings book of ISSS 2009 249 - 252 2009.10

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Effects of epsiron martensite and dislocation behavior by thermomechanical treatment in Fe-Cr damping alloy Reviewed

G-H. Kim, Y. Nishimura, Y. Watanabe, H. Sato, Y. Nishino, H-R. Jung, C-Y. Kang, I-S. Kim

Materials Science and Engineering A 521-522 368 - 371 2009.09

Language：English Publishing type：Research paper (scientific journal)

In-situ observation of microstructure of butterfly-type martensite plate in Fe-30%Ni alloy during tensile test using high-resolution EBSD

H. Sato, S. Zaefferer, E. M.-Fujiwara, Y. Watanabe

Hierarchical 3D/4D characterization for understanding of microstructural complexity 99 - 104 2009.09

Authorship：Lead author Language：Japanese Publishing type：Research paper (other academic)

Effects of training temperature on damping capacity in thermally cycled Fe-20 mass%Mn alloy Reviewed

Y. Watanabe, H. Sato, Y. Nishino, I-S. Kim

Materials Science and Engineering A 521-522 376 - 379 2009.09

Language：English Publishing type：Research paper (scientific journal)

A study on the formation mechanisms of butterfly-type martensite in Fe-30% Ni alloy using EBSD-based orientation microscopy Reviewed

H. Sato, S. Zaefferer

Acta Materialia 57 ( 6 ) 1931 - 1937 2009.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

遠心力混合粉末法による光触媒傾斜機能材料の製造技術 Invited

渡辺義見，佐藤尚

ケミカルエンジニヤリング 54 ( 4 ) 249 - 254 2009.04

Language：Japanese Publishing type：Research paper (scientific journal)

Novel method to evaluate the net wear volume of bag-filter by fly ash Reviewed

Y. Watanabe, H. Sato, Y. Hirai, I-S. Kim, S. Hinata, J. Kim

Journal of Hazardous Materials 161 ( 2-3 ) 775 - 780 2009.01

Language：English Publishing type：Research paper (scientific journal)

Formation of wear-induced layer with nanocrystalline structure in Al-Al₃Ti functionally graded material Reviewed

H. Sato, T. Murase, T. Fujii, S. Onaka, Y. Watanabe, M. Kato

Acta Materialia 56 ( 17 ) 4549 - 4558 2008.10

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Training effect on damping capacity in Fe-20mass%Mn binary alloy Reviewed

Y. Watanabe, H. Sato, Y. Nishino, I-S. Kim

Materials Science and Engineering A 490 ( 1-2 ) 138 - 145 2008.08

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Wear properties of intermetallic compound reinforced functionally graded materials fabricated by centrifugal solid-particle and in-situ methods Reviewed

Y. Watanabe, H. Sato, Y. Fukui

Journal of Solid Mechanics and Materials Engineering 2 ( 7 ) 842 - 853 2008.07

Language：English Publishing type：Research paper (scientific journal)

Effects of processing routes on wear property of Al-Al₃Ti alloys severely deformed by ECAP Reviewed

H. Sato, S. Elhadad, O. Sitdikov, Y. Watanabe

Materials Science Forum 584-586 971 - 976 2008.07

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Evaluation methods of wear properties of bag filter using an optical fiber and magnitic particles Reviewed

Y. Watanabe, S. Kishi, H. Sato, K. Mibu

Sen'i gakkaishi 64 79 - 84 2008.03

Language：English Publishing type：Research paper (scientific journal)

Density and hardness gradients of functionally graded material ring fabricated from Al-3mass%Cu alloy by a centrifugal in-situ method Reviewed

Y. Watanabe, H. Sato, T. Ogawa, I-S. Kim

Materials Transactions 48 ( 11 ) 2945 - 2952 2007.11

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Co addition effect on the precipitation behavior of laves phase in Fe-10Cr ferritic alloy Reviewed

I-S. Kim, S-M. Lee, J-Y. Kim, Y. Watanabe, H. Sato, Z. Zhang, H-R. Jung, C-Y. Kang

Materials Science Forum 561-565 1745 - 1748 2007.11

Language：English Publishing type：Research paper (scientific journal)

Mechanical and physical properties of Ni₃Al-based alloys with Cr carbides dispersion Reviewed

S. Miura, H. Goldenstein, K. Ohkubo, H. Sato, Y. Watanabe, T. Mohri

Materials Science Forum 561-565 439 - 442 2007.11

Language：English Publishing type：Research paper (scientific journal)

Effects of processing route on microstructure and texture development in ECAP of Al-Ti alloy Reviewed

Y. Watanabe, P.D. Sequeira, O. Sitdikov, H. Sato, Z. Zhang, I-S. Kim

Materials Science Forum 561-565 251 - 254 2007.11

Language：English Publishing type：Research paper (scientific journal)

Effects of SiO₂ particles on wear behavior of Cu-SiO₂ dispersion-hardened alloys Reviewed

H. Sato, Y. Watanabe

Materials Science Forum 561-565 659 - 662 2007.11

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Grain refinement and wear properties of Al cast refined by Al-5mass% refiner fabricated by severe plastic deformation

Y. Watanabe, O. Sitdikov, H. Sato, Z. Zhang

Researches and progresses of modern technology on silk, textile and mechanicals (Ⅱ) 2 132 - 134 2007.09

Language：English Publishing type：Research paper (scientific journal)

3-dimenional observation of crystal orientation relationship between butterfly-type martensite and austenite in Fe-30mass%Ni alloy

H.Sato S.Zaefferer Y.Watanabe S.Onaka

Researches and progresses of modern technology on silk, textile and mechanicals (Ⅱ) 2 140 - 142 2007.09

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Biodegradable fiber reinforced Ti composite fabricated by spark plasma sintering Reviewed

H. Sato, S. Umaoka, Y. Watanabe, I-S. Kim, M. Kawahara, M. Tokita

Materials Science Forum 539-543 3201 - 3206 2007.03

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Mechanical properties of Al-5.7wt%Ni eutectic alloy severely deformed by Equal-Channel Angular Pressing Reviewed

Y.Watanabe Z.Zhang H.Sato T.Inamura H.Hosoda

Materials Science Forum 539-543 2916 - 2921 2007.03

Language：English Publishing type：Research paper (scientific journal)

Theoretical study on fabrication of functionally graded material with density gradient by a centrifugal solid-particle method Reviewed

T.Ogawa Y.Watanabe H.Sato I-S.Kim Y.Fukui

Composites Part A 37 ( 12 ) 2194 - 2200 2006.12

Language：English Publishing type：Research paper (scientific journal)

Microstructure and mechanical properties of fiber reinforced FGM fabricated by the reaction at narrow holes method Reviewed

H. Sato, S. Gonda, Y. Watanabe, Y. Tanaka, M. Kajihara

Functionally Graded Materials 20 127 - 133 2006.12

Authorship：Lead author Language：Japanese Publishing type：Research paper (scientific journal)

Effect of magnetic field on weld zone by spot-welding in stainless steel Reviewed

Y. Watanabe, T. Takeda, H. Sato

ISIJ International 46 ( 9 ) 1292 - 1296 2006.09

Language：English Publishing type：Research paper (scientific journal)

Development of Fe-Mn-Si-Cr shape memory alloy machining chips reinforced smart composite Reviewed

T.Wakatsuki, H.Sato, Y.Watanabe, T.Maruyama

Tetsu-to-Hagane 92 ( 9 ) 562 - 566 2006.09

Language：Japanese Publishing type：Research paper (scientific journal)

Investigation of the formation mechanisms of martensite plates in Fe30Ni by high resolution orientation microscopy in SEM and TEM Reviewed

S. Zaefferer, H. Sato

Program and Abstract of the 7th European Symposium on Martensitic Transformations and Shape Memory Alloys (ESOMAT'2006) 269 - 269 2006.09

Language：English Publishing type：Research paper (international conference proceedings)

Grain refinement performance of Aluminum cast-alloy by deformed Al-Al₃Ti alloy refiner Reviewed

H. Sato, K. Ota, Y. Watanabe, Z. Zhang, K. Tsuzaki

Materials Science Forum 519-521 1859 - 1864 2006.07

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Estimation of the Cooling Rate Distribution during Fabrication of Al-Al₂Cu FGM by a Centrifugal in-situ Method Reviewed

T. Mukarami, H. Sato, Y. Watanabe

Functionally Graded Materials 19 1 - 6 2006.02

Language：Japanese Publishing type：Research paper (scientific journal)

A study on the crystal-orientation relationship of butterfly martensite in an Fe-30mass%Ni alloy by 3-D EBSD-based orientation microscopy Reviewed

Hisashi Sato, Stefan Zaefferer

Proceedings of Microscopy Conference 2005 54 - 54 2005.08

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

3D-analysis of the crystal orientation relationship and growth process of lenticular martensite in Fe-30mass%Ni alloy

Hisashi Sato, Stefan Zaefferer

Proceedings of 69. Jahrestagung der Deutschen Physukalischen Gesellschaft in Berlin 438 - 438 2005.03

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Morphological evolution of grain-boundary SiO₂ in internally oxidized Cu-Si bicrystals Reviewed

H.Sato I.Ota T Fujii S Onaka M Kato

Materials Transactions 45 ( 4 ) 818 - 823 2004.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Formation of the fine Al₃Ti fibers near the worn surface of the Al alloy containing large Al₃Ti dispersoids

Hisashi Sato, Takashi Murase, Toshiyuki Fujii, Susumu Onaka, Masaharu Kato, Yoshimi Watanabe

Proceedings of the Second International Conference on Advanced Fiber/Textile Materials 2002 91 - 91 2002.11

Authorship：Lead author Language：English Publishing type：Research paper (international conference proceedings)

Effects of grain-boundary GeO₂ particles on intergranular fracture of Cu-GeO₂ polycrystals Reviewed

H.Sato T.Fujii S.Onaka M.Kato

Journal of Materials Science 2003/4 ( 8 ) 1689 - 1693 2002.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Brittle intergranular fracture of Cu polycrystals containing liquid B₂O₃ particles Reviewed

H.Sato, N.Takeoka, T.Fujii, S.Onaka, M. Kato

Journal of Materials Science Letters 21 ( 8 ) 617 - 619 2002.04

Authorship：Lead author Language：English Publishing type：Research paper (scientific journal)

Elastic states of doughnut-like inclusion with uniform eigen-strains treated by averaged Eshelby tensors Reviewed

S.Onaka, H.Sato, M.Kato

Philosophical Magazine Letters 82 ( 1 ) 1 - 7 2002.01

Language：English Publishing type：Research paper (scientific journal)

PREV - NEXT

To the head of this page.▲

<SATO Hisashi>

Papers - SATO Hisashi