ITOIGAWA Fumihiro

写真a

Affiliation Department etc.

Department of Electrical and Mechanical Engineering
Department of Electrical and Mechanical Engineering

Title

Professor

Graduating School

  •  
    -
    1986.03

    Nagoya Institute of Technology   Faculty of Engineering   Graduated

Graduate School

  •  
    -
    1993.03

    Nagoya Institute of Technology  Graduate School, Division of Engineering  Doctor's Course  Completed

Degree

  • Nagoya Institute of Technology -  Doctor (Engineering)

  • Nagoya Institute of Technology -  Master of Engineering

External Career

  • 2002.03
    -
    2002.09

    University of Leeds   Researcher  

Academic Society Affiliations

  • 1991.04
    -
    Now

    Japanese society of Tribologist

  • 1988.04
    -
    Now

    Japan society of precision engineering

  • 2000.04
    -
    Now

    Japan society of electrical machining engineers

  • 2009.04
    -
    Now

    Japan thermal spray society

Field of expertise (Grants-in-aid for Scientific Research classification)

  • Production engineering/Processing studies

  • Design engineering/Machine functional elements/Tribology

  • Thin film/Surface and interfacial physical properties

 

Research Career

  • Precious processing using short pulse laser

    Collaboration in Japan   Small and Medium Enterprise Fundamental and Creative Technology Development Program  

    Project Year:  2011.04  -  Now

  • Starved EHL

    (not selected)  

    Project Year:  1993.04  -  Now

Papers

  • Coating Failure Property of CVD Diamond Coated Tool in Machining of Sintered WC-Co

    Erina SAHASHI, Fumihiro ITOIGAWA, Tomoya MINAMI, Takashi NAKAMURA

    Proceedings of Leading Edge Manufacturing in 21st Century     2017.11  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • Effect of micro-structure of medium density fiberboard on cutting forcevariation with cutting speed

    Akinobu NAKAMURA, Fumihiro ITOIGAWA, Takashi NAKAMURA

    Proceedings of Leading Edge Manufacturing in 21st Century     2017.11  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • Principal Factors Control Tool Wear in High-speed Cutting of Titanium Alloy

    Sho NEGITA, Fumihiro ITOIGAWA, Shinya HAYAKAWA, Takashi NAKAMURA

    Proceedings of Leading Edge Manufacturing in 21st Century     2017.11  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • Effects of Gripping Force ofHydraulic Three-Finger PowerChuckon Modal Stiffness and Tool Life

    LifeKazunori FUJISE, Keita MIZUNO, Fumihiro ITOIGAWA, Hironari ISHIHARA, Takashi NORIHISA, Yosuke ICHIGI

    Proceedings of Leading Edge Manufacturing in 21st Century     2017.11  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • ...Size control and luminescence properties of Eu2+ :LiCaAlF6 particles prepared by femtosecond pulsed laser ablation

    Yusuke Inoue, Sotaro Muramatsu, Fumihiro Itoigawa,Shingo Ono, Masaaki Sudo, Kentaro Fukuda, Takayuki Yanagida

    Journal of Applied Physics   122 ( 13 )   2017.10  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Carbonization of Silicon Nanoparticles via Ablation Induced by Femtosecond Laser Pulses in Hexane

    Xi Yu, Shusaku Terakawa, Toru Asaka, Shingo Ono, Fumihiro Itoigawa, Jun Takayanagi

    Arabian Journal for Science and Engineering   42 ( 10 ) 4221 - 4226   2017.09  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Effect of Tangential Loading History on Static Friction Force of Elastic Slider with Split Contact Surface: Model Calculation

    Satoru Maegawa, Fumihiro Itoigawa, Takashi Nakamura, Hiroshige Matsuoka and Shigehisa Fukui

    Tribology Letters     2017.06  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • In-situ observation of formation behavior of adsorption film in the narrow space using surface plasmon resonance (SPR) method

    Koki Fukuta, Satoru Maegawa, Fumihiro Itoigawa and Takashi Nakamura

    Key Engineering Materials     2017.06  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Effect of Stable Saw-tooth Chip Formation on Depth-of-Cut Notch Wear in Ni-based Heat-Resistant Alloy Cutting

    Ruiqiang YE, Fumihiro ITOIGAWA, Takashi NAKAMURA

    Proceedings of 16th International Conference on Precision Engineering   C109 ( 8246 )   2016.11  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • Reduction in Microscopic Surface Defects of cBN Tool with Short-pulse Laser Processing and Its Improvement of Cutting Performance for Hardened Steel

    Ryohei USUI, Fumihiro ITOIGAWA, Kohei KATO, Takashi NAKAMURA

    Proceedings of 16th International Conference on Precision Engineering ( Japan Society of Precision Engineers )  C102 ( 8198 )   2016.11  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

display all >>

Review Papers

  • 真球度と軸受振動

    舩橋こう一,中村隆,糸魚川文広

    NTN Technical Review ( NTN )  60   2 - 6   1992.01

    Introduction and explanation (scientific journal)   Multiple Authorship

Presentations

  • Principal Factors Control Tool Wear in the High-speed Cutting of Titanium alloy

    Shou Negita, Fumihiro Itoigawa, Shinya Hayakawa, Takashi Nakamura

    The 9th International Conference on Leading Edge Manufacturing in 21st Century  2017.11  -  2017.11 

  • Effects of Gripping Force of Hydraulic Three-Finger Power Chuck on Modal Stiffness and Tool life

    Kazunori Fujise Keita Mizuno, Fumihiro Itoigawa, Hironari Ishihara, Takashi Norihisa, Yousuke Ichigi

    The 9th International Conference on Leading Edge Manufacturing in 21st Century  2017.11  -  2017.11 

  • Effect of micro-structure of medium density fiberboard on cutting force variation with cutting speed

    Akinobu Nakamura, Fumihiro Itoigawa, Takashi Nakamura

    The 9th International Conference on Leading Edge Manufacturing in 21st Century  2017.11  -  2017.11 

  • Coating Failure Property of CVD Diamond Coated Tool in Machining of Sintered WC-Co

    Erina Sahashi, Fumihiro Itoigawa, Tomoya Minami, Takashi Nakamura

    The 9th International Conference on Leading Edge Manufacturing in 21st Century  2017.11  -  2017.11 

  • Effect of additives on load capacity improvement of DLC coated sliding surface

    Kimio Imai, Fumihiro Itoigawa, Atsushi Akamatsu, Akira Watanabe, Takashi Nakamura

    6th World Tribology Congress  2017.09  -  2017.09 

  • Reserch of oil film incremental effect by truncating the surface roughness under EHL conditions

    Hiroaki TAKEUCHI, Takafumi Yoshida, Fumihiro ITOIGAWA

    6th World Tribology Congress  2017.09  -  2017.09 

  • In-situ observation of adsorption film thickness of lubricant additives on the copper surface using SPR contact microscopy in otto-configuration

    Kouki Fukukda, Satoru Maegawa, Fumihiro Itoigawa, Toshiya Ishii, Kazuhiro Yagihashi, Takashi Nakamura

    6th World Tribology Congress  2017.09  -  2017.09 

  • Fabrication of Molybdenum Carbide Nanoparticles by Femtosecond Laser Ablation of Molybdenum in Hexane

    Shusaku TERAKAWA, Xi YU, Toru ASAKA, Fumihiro ITOIGAWA, Shingo ONO, Masaaki SUDO

    The 15th International Conference on Advanced Material  2017.08  -  2017.09 

  • Synthesis of Silicon Carbide Nanoparticles by Femtosecond Laser Ablation of Silicon in Hexane

    Xi YU, Shusaku TERAKAWA, Toru ASAKA, Fumihiro ITOIGAWA, Shingo ONO, Masaaki SUDO

    The 15th International Conference on Advanced Material  2017.08  -  2017.09 

  • Cutting Performance of cBN Tool Shapened with Short Pulse Laser in High Speed Cutting of Gray Cast Iron

    Kohei Kato, Fumihiro Itoigawa and Takashi Nakamura

    The 7th International Conference on Manufacturing, Machine Design and Tribology  2017.04  -  2017.04  KSME

display all >>

 
 

Academic Activity

  • 2016.03
    -
    Now

    Japan society of mechanical engineers  

  • 2016.03
    -
    Now

    Japan society of precision engineering  

  • 2014.04
    -
    2016.03

    Japan society of mechanical engineers  

  • 2011.05
    -
    2013.04

    Japanese society of Tribologist  

  • 2010.09
    -
    2011.05

    Japan society of mechanical engineers   ICMDT2011 Committee member

  • 2010.04
    -
    2012.03

    Japan society of mechanical engineers  

  • 2010.04
    -
    2010.12

    Japan society of electrical machining engineers  

  • 2009.04
    -
    2011.03

    Japan society of mechanical engineers  

  • 2006.04
    -
    2007.03

    Japan society of mechanical engineers  

  • 2006.01
    -
    Now

    Japanese society of Tribologist   Tribology Online, associate editor

display all >>