KITAMURA Kazuhiko

写真a

Affiliation Department etc.

Department of Electrical and Mechanical Engineering
Department of Electrical and Mechanical Engineering
Quality Innovation Techno-Center

Title

Professor

Mail Address

E-mail address

Graduating School

  •  
    -
    1981.03

    Nagoya Institute of Technology   Faculty of Engineering   Graduated

Graduate School

  •  
    -
    1983.03

    Nagoya Institute of Technology  Graduate School, Division of Engineering  Master's Course  Completed

Degree

  • Nagoya Institute of Technology -  Master of Engineering

  • Nagoya Institute of Technology -  Doctor (Engineering)

External Career

  • 1983.04
    -
    1997.03

    Toyota R & D Loboratories   Researcher  

Academic Society Affiliations

  • 2010.10
    -
    Now

    The Iron and Steel Institute of Japan

  • 2003.04
    -
    Now

    Society of Automotive Engineers of Japan

  • 2003.04
    -
    Now

    International Cold Forging Group

  • 1988.04
    -
    Now

    Japanese Society of Tribologists

  • 1984.04
    -
    Now

    Japan Society of Technogy for Plasticity

display all >>

Field of expertise (Grants-in-aid for Scientific Research classification)

  • Design engineering/Machine functional elements/Tribology

  • Production engineering/Processing studies

 

Research Career

  • Lubrication in Hot Forging

    Collaboration in Japan   Scientific Technology Development Program for Small and Medium Enterprise  

    Project Year:  2007.04  -  Now

  • Estimation on Tribological Performance of Lubricants and Hard Coating for Reduction of Environmental Load

    Collaboration in Japan   (not selected)  

    Project Year:  2004.04  -  Now

  • Estimation on Galling Prevention Property of Forming Oil for Stainless Steel

    Collaboration in Japan   (not selected)  

    Project Year:  2004.04  -  Now

  • Joint Method Using Metal Deformation

    Collaboration in Japan   (not selected)  

    Project Year:  2003.04  -  Now

  • Plastic Anisotropy of Metal Bar and Tube

    Collaboration in Japan   (not selected)  

    Project Year:  2000.04  -  Now

Thesis for a degree

  • Study on estimation of luburication conditions and performance of lubricant in cold forging

    Kazuhiko Kitamura 

      1997.09  [Refereed]

    8   1

Papers

  • Development oil-type lubricants for cold forging using phase transition behavior under high pressure conditions

    Tomoaki Okano, Nobuhide Tanino, Kazuhiko Kitamura

    Roceedings of the 13th International Conference on the Technology of Plasticity ( ICTP 2021 )  1 ( 1 ) 1529 - 1536   2021.07  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Forming of pin on thick plate by open extrusion

    Kazuhito Asai, Kazuhiko Kitamura

    Procedia Manufacturing   50   345 - 349   2020.10  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • 厳しい条件の塑性加工における潤滑技術開発

    北村 憲彦

    Form Tech Review 天田財団助成研究成果論文集   28 ( 1 ) 10 - 20   2019.03  [Refereed]  [Invited]

    Research paper (other science council materials etc.)   Single Author

  • Friction coefficients in cold forging: a global perspective

    Peter Groche, Dr.-Ing. Dipl.-Wirtsch.-Ing.; Philipp Kramer; Niels Bay; Peter Christiansen; Laurent Dubar; Kunio Hayakawa;Chengliang Hu; Kazuhiko Kitamura; Philippe Moreau

    CIRP Annals Manufacturing Technology ( Elsevier )  67 ( 1 ) 261 - 264   2018.08

    Research paper (scientific journal)   Multiple Authorship

  • Estimation of Frictional Coefficient between Punch and Billet at Back-Stroke in Backward Can Extrusion Test of Steel

    Kazuhito Asai, Kazuhiko Kitamura, Keisuke Goto, Nobukazu Hayashi

    Key Engineering Materials ( Committe of the 8th ICTPM )  767 ( 1 ) 248 - 255   2018.06  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Experiment and FE Analysis of Compression of Thick Ring Filled with Oil

    Yoshiki Tatematsu, Mitsuka Morimoto, Kazuhiko Kitamura

    Tribology in Manufacturing Processes and Joining by Plastic Deformation II ( Committe for the 8th ICTMP )  767 ( 1 ) 141 - 148   2018.06  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Estimation of friction by using improved calibration curves of ring

    Kazuhito Asai, Kazuhiko Kitamura, Nobuyuki Yukawa, Nobukazu Hayashi

    Procedia Engineering ( Science Direct )  ( 207 ) 2280 - 2285   2017.09  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Mechanical joining of shaft and holed disc in rotational and axial directions

    Kenji Hirota, Kazuhiko Kitamura, Yoshihiko Ukai, Keiichi Matsunaga

    Procedia Engineering ( Elsevier Ltd. )  207   980 - 985   2017.09  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Evaluation of anti-galling property of sulfurized olefins with overbased calcium sulfonates on stainless steel by cup internal ironing test

    Tomohiro TAKAKI, Shogo ITO, Kazuhiko KITAMURA, Kazuhiro YAGISHITA, Junichi SHIBATA

    Procedia engineering ( Elsevier Ltd. )  207   2292 - 2297   2017.09  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Combined Effect of DLC-Si Coating and Polymer-containing Oil on Lubrication Performance in Cold Forming of Steel

    Hiroyuki Mori, Munehisa Matsui, Mamoru Tohyama, Kazuhiko Kitamura

    Journal of the JSTP ( The Japan Society for Technology of Plasticity )  58 ( 678 ) 611 - 616   2017.07  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

display all >>

Books

  • Process Tribology -Tribology, Lubrication, and Wear in Metal Forming

    Tamotsu Nakamura, Takaji Mizuno, Yoshinari Tsuchiya, Shigeki Kimura, Itaru Ishibashi, Shinobu Komiyama, Zhigang Wang, Akira Azushima, Tomiharu Matsushita, Masahiko Jin, Ryo Matsumoto, Kazuhiko Kitamura, Nobuhiro Ikeda, Seiji Kataoka, Masao Murakawa, Hideo Koyama, Akira Yanagida (Part: Multiple Authorship )

    The Japan Society for Technology of Plasticity  2020.02 ISBN: 978-4-339-04373-0

  • Technical book series on metal forming (9) Forging -Aim at high function and net-shape

    Kazuhiko Kitamura, Ryo Matsumoto etal. (Part: Allotment Writing ,  Chief author )

    Japanese society for technology and Plasticity  2018.10 ISBN: 978-4-339-04379-2

    Chief author

  • 60 Excellent Inventions in Metal Forming

    A. Erman Tekkaya et al. (Part: Multiple Authorship ,  p. 313 - p. 318 )

    Springer Vieweg  2015.06 ISBN: 978-3-662-46311-6

  • Precision Forging

    Kozo Osakada, Takashi Ishikawa, Munenori Ono, Koichi Morishita, Hiroyuki Ando, Kazuhiko Kitamura, et al. (Part: Multiple Authorship )

    Nikkan Kogyo Shimbun Ltd.  2010.10 ISBN: 9784526065545

  • Application and Technology of DLC Films

    Noto Ohtake, Hidetoshi Saito, Seiji Kataoka, Tsuyoshi Kuroda, Kazuhiko Kitamrua, et al. (Part: Multiple Authorship )

    CMC Publishing CO.,LTD.  2007.12 ISBN: 9784882319825

  • An Introduction to Metal Forming

    Nobuhiro Koga, Kunio Hayakawa, Kazuhiko Kitamura, Toshihiko Kuwabara, et al. (Part: Multiple Authorship )

    CORONA PUBLISHING CO.,LTD.  2007.09 ISBN: 9784339045840

Review Papers

  • Beyond crisis of manufacturing, finding and polishing gemstone in young

    Kazuhiko Kitamura

    Sokeizai ( Incorporated foundation of Sokeizai center )  62 ( 10 ) 76 - 77   2021.10  [Invited]

    Other article   Single Author

  • Connecting Intellect and People in JSTP for Future

    Kazuhiko Kitamura

    Bulletin of the Japan Society for Technology of Plasticity ( Japan )  4 ( 42 ) 337 - 338   2021.06  [Invited]

    Other article   Single Author

  • Annual report of Sokeizai industry in 2020 on activities of academia and industry for research of forging

    Kazuhiko Kitamura

    Sokeizai ( Incorporated foundation of Sokeizai center )  62 ( 5 ) 49 - 51   2021.05

    Introduction and explanation (scientific journal)   Single Author

  • Forming methods, Die forging of steel bar materials (1) Cold forging

    Kazuhiko Kitamura

    The special steel ( Special steel Association of Japan )  69 ( 5 ) 28 - 31   2020.09  [Invited]

    Introduction and explanation (scientific journal)   Single Author

  • Development and Study on Advanced of Lubrication Engineering in Precision Forging

    Kazuhiko Kitamura

    Bulletin of the Japan Society for Technology of Plasticity   2 ( 023 )   2019.12  [Refereed]  [Invited]

    Introduction and explanation (scientific journal)   Single Author

  • Estimation Method of Lubricating Performance for Hot Hofrging

    Kazuhiko Kitamura, Kazuhito Asai

    Pulastos ( The Japan Society for Technology of Plasticity )  2 ( 14 ) 90 - 95   2019.02  [Refereed]  [Invited]

    Introduction and explanation (scientific journal)   Multiple Authorship

  • Lubricants for precision forging

    Kazuhiko Kitamura

    8th International Seminar on Precision Forging ( Committee of 8th ISPF )  1 ( 1 ) 15 - 20   2018.03  [Invited]

    Introduction and explanation (international conference proceedings)   Single Author

  • Die life in Forging

    Kazuhiko Kitamura

    The 325th Symposium for Technology of Plasticity ( The Japan Society for Technology of Plasticity )  325   1 - 5   2017.11  [Invited]

    Lecture materials etc. (seminar, tutorial, course, lecture and others)   Single Author

  • Effect of combining forming oil with DLC-Si coated tool on lubrication in cold forging

    Kazuhiko Kitamura

      ( 619 ) 27 - 31   2016.12

    Introduction and explanation (commerce magazine)   Single Author

  • Tribology for precision forging

    Kazuhiko Kitamura

    Rroceedings of the 7th JSTP International Seminar on Precision Froging ( Japan Society for Technology of Plasticity )  74 ( 1 ) 53 - 58   2015.03

    Introduction and explanation (others)   Single Author

display all >>

Presentations

  • Investigation of Efficiency, Economy, and Ecology in Lubrication for Precise Forging

    Kazuhiko Kitamura  [Invited]

    International Symposium on Technology of Plasticity November 24-26, 2021 for Celebrating KSTP’s 30 Years Anniversary   (Busan, South Korea)  2021.11  -  2021.11  Korea Society for Technology of Plasticity

  • Breathing of Fresh Life into Forming by Micro/nano Technologies

    Kazuhiko Kitamura  [Invited]

    The 13th Asian Workshop on Micro/Nano Forming Technology & The 3rd Asian Pacific Symposium on Technology of Plasticity  (Shanghai, China)  2021.11  -  2021.11  Committee of Asian Workshop on Micro/Nano Forming Technology & Committee of Asian Pacific Symposium on Technology of Plasticity

  • Investigation of surface conditions on blasted billet before lubrication for cold forging

    Toshihiro Masaki, Kazuhisa Tachibana, Kazuhiko Kitamura

    The 72nd Japanese Joint Conference for Technology of Plasticity  (on-line)  2021.10  -  2021.10  Japanese Society for Technology of Plasticity

  • Investigation of joining strength in caulking metal part to steel wire

    Shotaro Komori, Yota Mizuno, Hodaka Inishi, Kazuhiko Kitamura

    The 72nd Japanese Joint Conference for Technology of Plasticity  (onl-ine)  2021.10  -  2021.10  Japanese Society for Technology of Plasticity

  • Influence of punch-nose shape and friction on material flow in backward-cup extrusion

    Kazuhito Asai, Shunsuke Saito, Kazuhiko Kitamura

    The 72nd Japanese Joint Conference for Technology of Plasticity  (onl-ine)  2021.10  -  2021.10  Japanese Society for Technology of Plasticity

  • Proposal of tool shape for sever ironing of thick tube to use lubricant with low viscosity

    Yuki takahashi, Suguru Watanabe, Kazuhiko Kitmaura

    The 72nd Japanese Joint Conference for Technology of Plasticity  (onl-ine)  2021.10  -  2021.10  Japanese Society for Technology of Plasticity

  • Improvement of axis joining strength in two-directional joining shaft and disc by forming

    Kenji Hirota, Kazuhiko Kitamura, Yasuhiko Ukai, Kei-ichi Matsunaga

    The 2021 Japanese Spring Conference for the Technology of Plasticity  (on-line)  2021.06  -  2021.06  Japanese Society for Technology of Plasticity

  • ボール通し潤滑試験を利用した実機引抜き用化成処理皮膜の潤滑性能評価

    川邊健太,北村憲彦,小西勇美

    2021年度塑性加工春季講演会  (オンライン)  2021.06  -  2021.06  日本塑性加工学会

  • Proposal of tension-added ball-penetration test

    Daichi Ito, Kazuhiko Kitamura

    The 2021 Japanese Spring Conference for the Technology of Plasticity  (on-line)  2021.06  -  2021.06  Japanese Society for Technology of Plasticity

  • Establishment of frictional coefficient for environmentally-friendly lubricant at backstroke in backward-cup extrusion

    Shunsuke Saito, Kazuhito Asai, Kazuhiko Kitamura

    The 2021 Japanese Spring Conference for the Technology of Plasticity  (on-line)  2021.06  -  2021.06  Japanese Society for Technology of Plasticity

display all >>

Industrial Property

  • Die device

    特願 特願2011-221983 

    Die device

  • Forming Oil and Method of Cold Forming Using The Oil

    特願 特願2011-107886 

    Forming Oil and Method of Cold Forming Using The Oil

  • Composite Material of Lubricant for Metal Forming and Method of Manufacturing It

    特願 特願平5-299873 

    Composite Material of Lubricant for Metal Forming and Method of Manufacturing It

  • Forging Method of Square Sleeve with Complex Cross Sction

    特願 平03-68094  特開 平04-279237 

    Forging Method of Square Sleeve with Complex Cross Sction

  • Appratus to Supply Powder in Deterninate Quantity

    特願 平03-72404 

    Appratus to Supply Powder in Deterninate Quantity

  • Composite of Lubricant Oil for Metal Forming and Manufacuring Method of The Oil

    特願 昭63-111257  特開 平01-282295 

    Composite of Lubricant Oil for Metal Forming and Manufacuring Method of The Oil

  • Method of Warm Forging

    特願 特許公開昭63-268530  特開 昭63-268530 

    Method of Warm Forging

  • Composite of Lubricant Oil for Metal Forming and Manufacturing Method of The Oil

    特願 昭62-98125  特開 昭63-264698 

    Composite of Lubricant Oil for Metal Forming and Manufacturing Method of The Oil

  • Lubrication Method for Warm Forging

    特願 昭60-17713  特開 昭61-180634 

    Lubrication Method for Warm Forging

Work

  • Fundamental Learning of Forging Technology

    Web Service  2018.01  -  Now

    Chapter 1 What is forging and types?
    Chapter 2 Processes of forging and defect of product
    Chapter 3 Material for forging
    Chapter 4 Material of die, die coating, and lubricant
    Chapter 5 Mechanicis for forging
    Chapter 6 Machines for forging

Academic Awards Received

  • Sokeizai center encouragement award for technology in industry

    2021.11.05    

    Winner: Kiyoshi Oohashi, Tsuneyuki Goshima, Masumi Kunii, Kazuhiko Kitamura, Yoshio Mizutani, Takahiro Adachi,

  • Japanese Society of Triblologists, Award for Technology

    2021.05.25    

    Winner: Tomohiro TAKAGI, Junichi SHIBATA, Kazuhiko KITAMURA, Takuji MURAO

  • Fellow of the Japan Society for Technology of Plasticity

    2020.06.12    

    Winner: Kazuhiko Kitamura

  • The Japan Petroleum Institute Award for Technologial Progress

    2020.05.25    

    Winner: Tomohiro Takaki, Junichi Shibata, Kazuhiko Kitamura, Takuji Murao

  • JSTP MEDAL

    2019.06.07    

    Winner: Kazuhiko Kitamura

  • Japan Society for Technology of Plasticity, Tokai blanch Awards, Research Awards

    2016.04.22    

    Winner: Kazuhito Asai, Motoki Terano, Kazuhiko Kitamura

  • JSTP Excellent Reserch Award

    2005.04    

    Winner: Kazuhiko Kitamura

  • Tokai Chemical Industrial Technical Awards

    1996.04    

    Winner: Toshihide Ohmori, Kazuhiko Kitamura

  • 1991 R&D 100 Awards

    1991.04    

 
 

Academic Activity

  • 2014.04
    -
    2016.03

    Japan Society of Mechanical Engineerigs  

  • 2013.04
    -
    2015.04

    Japan Society of Technogy for Plasticity   The manager of Tokai branch office

Social Contribution

  • Advanced course of manager for forging in 2021, Tool and lubrication

    Japan Forging Association  (on-line)  2021.06  -  2021.06

  • Advanced course of manager for forging in 2021, Introduction of forging

    Japan Forging Association  (on-line)  2021.05  -  2021.05

  • Training seminar for engineers working at a medium and small business in 2020 academic year

    Nagoya-city cooperation for industrial promotion   (Nagoya Municipal Industrial Research Institute)  2021.01  -  2021.01