SATO Atsushi

写真a

Affiliation Department etc.

Department of Architecture, Civil Engineering and Industrial Management Engineering
Department of Architecture, Civil Engineering and Industrial Management Engineering

Title

Associate Professor

Mail Address

E-mail address

Research Fields, Keywords

Structural Engineering

Graduating School

  • 1994.04
    -
    1998.03

    Nagoya Institute of Technology   Faculty of Engineering   Graduated

Graduate School

  • 2000.03
    -
    2003.03

    Nagoya Institute of Technology  Graduate School, Division of Engineering  Doctor's Course  Completed

  • 1998.04
    -
    2000.03

    Nagoya Institute of Technology  Graduate School, Division of Engineering  Master's Course  Completed

Degree

  • Nagoya Institute of Technology -  Doctor (Engineering)

External Career

  • 2016.08
    -
    2017.03

    Czech Technical University in Prague   Department of Steel and Timber Structures   Visiting Professor  

  • 2010.04
    -
    Now

    Nagoya Institute of Technology   School of Engineering   Associate Professor  

  • 2008.04
    -
    2010.03

    Kyoto University   School of Engineering, Department of Architecture and Architectural Engineering   Assistant Professor  

  • 2007.04
    -
    2008.03

    Nagoya Institute of Technology   School of Engineering   Assistant Professor  

  • 2006.03
    -
    2008.02

    University of California, San Diego   Department of Structural Engineering   Visiting scholar  

display all >>

Academic Society Affiliations

  • 1998.04
    -
    Now

    Architectural Institute of Japan

  • 2003.04
    -
    Now

    Japanese Society of Steel Construction

  • 2020.12
    -
    Now

    IABSE (International Association for Bridge and Structural Engineering)

  • 2020.12
    -
    Now

    IABSE (International Association for Bridge and Structural Engineering),Symposium/ Prague

  • 2018.10
    -
    2019.09

    SDSS (THE INTERNATIONAL COLLOQUIUM ON STABILITY AND DUCTILITY OF STEEL STRUCTURES)

display all >>

Field of expertise (Grants-in-aid for Scientific Research classification)

  • Building structures/Materials

 

Papers

  • Experimental Study on H-shaped Columns Under Compressive Axial Force with One End Cyclic Bending Moment In case of cross-sectional shapes are deep wide-flange and middle wide flange

    Atsushi SATO, Shimpei YOSHIOKA

    Journal of Structural and Construction Engineering (Transactions of AIJ) ( Architectural Institute of Japan )  86 ( 789 ) 1558 - 1569   2021.11  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • STRUCTURAL PERFORMANCE OF COLD-FORMED STEEL MOMENT-RESISTING FRAME ASSEMBLED BY BOLTS

    Atsushi SATO, Honoka KITAGAWA

    XIII Conference on Steel and Composite Construction ( Ernst & Sohn )    2021.11  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Experimental Study of The Beam-Column with Different Width-to-Thickness Ratio

    Takuro Hayashi, Atsushi Sato

    The 22nd Japan-Korea-Taiwan Joint Seminar on Earthquake Engineering for Building Structures (SEEBUS) ( SEEBUS 2021 )    136 - 144   2021.10  [Invited]

    Research paper (international conference proceedings)   Multiple Authorship

  • Mathematical Modeling of Steel Beam-Column Under Compressive Axial Force with One End Monotonic Moment

    Soya Nakatsuka, Atsushi Sato

    The 22nd Japan-Korea-Taiwan Joint Seminar on Earthquake Engineering for Building Structures (SEEBUS) ( SEEBUS 2021 )    18 - 25   2021.10  [Invited]

    Research paper (international conference proceedings)   Multiple Authorship

  • Structural performance evaluation of square hollow section column under compressive axial force with bending moment having different width-thickness ratio

    Takuro Hayashi, Atsushi Sato, Shimpei Yoshioka

    The 9th European Conference on Steel and Composite Structures (EuroSteel2021) ( Wiley, Ernst & Sohn )  4 ( 2-4 ) 2341 - 2348   2021.09  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • REQUIRED NUMBER OF SELF-DRILLING SCREWS FOR LIGHT GAUGE BUILT-UP COMPRESSION MEMBERS TO ENSURE FLEXURAL BUCKLING AS A UNIT MEMBER

    Kazuya MITSUI, Atsushi SATO, Kikuo IKARASHI

    Journal of Structural and Construction Engineering (Transactions of AIJ) ( Architectural Institute of Japan )  86 ( 784 ) 979 - 990   2021.06  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • EXPERIMENTAL STUDY ON SHALLOW H-SHAPED STEEL COLUMN UNDER COMPRESSIVE AXIAL FORCE WITH ONE END BENDING MOMENT

    Atsushi SATO, Shunji YAMADA

    Journal of Structural and Construction Engineering (Transactions of AIJ) ( Architectural Institute of Japan )  86 ( 784 ) 1002 - 1013   2021.06  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • EXPERIMENTAL STUDY ON SQUARE STEEL TUBULAR COLUMNS UNDER COMPRESSIVE AXIAL FORCE WITH BIAXIAL BENDING MOMENT In case of end bending moment ratio equal to 0.0 and loading direction equal to 45°

    Atsushi SATO, Takeshi ONOGI

    Journal of Structural and Construction Engineering (Transaction of AIJ) ( Architectural Institute of Japan )  85 ( 770 ) 595 - 605   2020.04  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • EXPERIMENTAL RESEARCH OF ULTRA-HIGH-STRENGTH BOLTED FRICTION JOINTS USING FAIL-SAFE STEEL

    Atsushi SATO, Hiroaki SUZUKI, Yuuji KIMURA

    Journal of Structural Engineering ( Architectural Institute of Japan )  66B   169 - 176   2020.03  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Experimental study of steel beam-to-column connections with bolted joints where the dissipative zone is the panel zone

    Atsushi Sato, Yohei Koyama, Hideki Idota, Yuki Sato, Shigeharu Yagi, Sunao Takaki, Manabu Kamada

    Steel Construction ( Ernst & Sohn (Wiley) )  13 ( 1 ) 22 - 29   2020.02  [Refereed]  [Invited]

    Research paper (scientific journal)   Multiple Authorship

display all >>

Books

  • Recommendation for Design of Connections in Steel Structers

    (Part: Allotment Writing ,  Chapter 2, Chapter 6 )

    Architectural Institute of Japan  2021.02 ISBN: 978-4-8189-0661-7

    Chapter 2, Chapter 6

  • Recommendations for Plastic Design fo Steel Structures

    (Part: Allotment Writing ,  Chapter 6 )

    Architectural Institute of Japan  2017.02 ISBN: 978-4-8189-0637-2

    Chapter 6

  • Guideline on Design and Fabrication of High Strength Bolted Connections

    (Part: Allotment Writing )

    Architectural Institute of Japan  2016.05 ISBN: 978-4-8189-0635-8

  • Recommended Provisions for Seismic Damping Systems applied to Steel Structures

    (Part: Allotment Writing )

    Architectural Institute of Japan  2014.11 ISBN: 978-4-8189-0622-8

  • Guideline on Design of Light-gauge Structures

    (Part: Allotment Writing )

    The Japan and Iron and Steel Federation  2014.03 ISBN: 978-4-7655-2574-9

  • Recommendation for Design of Connections in Steel Structers

    (Part: Allotment Writing )

    Architectural Institute of Japan  2012.03 ISBN: 978-4-8189-0603-7

Review Papers

  • Cold-Formed Steel Special Bolted Moment Frames

    Chia-Ming Uang and Atsushi Sato

    STRUCTURE ( National Council of Engineers Associations (NCSEA) )    8 - 10   2011.02

    Introduction and explanation (commerce magazine)   Multiple Authorship

Presentations

  • The Influence on Collapse Margin Evaluation of the Steel Sheet Shear Wall with Burring Holes by Considering the Hold-down Effect to the Leg Hardware

    Tetsuro HAYASHI, Atsushi SATO

    Annual Meeting Architectural Institute of Japan  2021.09  -  2021.09 

  • A Study of H-shaped Beam-Column Ultimate State that is dominated by Local Buckling or In-plane Instability under the Combined Loading Situation

    Ukyo Fujiwara, Atsushi SATO

    2021.09  -  2021.09 

  • Analytical Study of Reinforcement at the Bolted Joints of Cold-Formed Steel Moment Frame Assembled by Built-up Members

    Koya TAGAMI, Atsushi SATO

    Annual Meeting Architectural Institute of Japan  2021.09  -  2021.09 

  • Analytical Study on H-shaped Columns Subjected to Compressive Axial Force with One End Monotonic Bending Moment

    Shimpei YOSHIOKA, Atsushi SATO

    Annual Meeting Architectural Institute of Japan  2021.09  -  2021.09 

  • Plastic Deformation Performance of Square Hollow Section Column subjected to Compressive Axial Force with One End Cyclic Bending Moment Having Different Width-Thickness Ratio

    Takuro HAYASHI, Atsushi SATO

    Annual Meeting Architectural Institute of Japan  2021.09  -  2021.09 

  • Study on Reinforcement for Angle Steel Main Post of Transmission Towers - Part1 Buckling test -

    Shunichi TAKAGI, Atsushi SATO, Yusei KAMIYA, Keiichi SATSUKAWA, Takayuki CHUJO

    Annual Meeting Architectural Institute of Japan  2021.09  -  2021.09 

  • Study on Reinforcement for Angle Steel Main Post of Transmission towers - Part2 Finite Element Analysis

    Yusei KAMIYA. Shunichi TAKAGI, Atsushi SATO, Keiichi SATSUKAWA, Takayuki CHUJO

    Annual Meeting Architectural Institute of Japan  2021.09  -  2021.09 

  • Structural Modeling of Wide Flange Steel Beam-Column Under Combined Loading Conditions

    Soya NAKATSUKA, Atsushi SATO

    Annual Meeting Architectural Institute of Japan  2021.09  -  2021.09 

  • Proposal of Analysis Model Considering the Suppressing Effect to Leg Hardware on Steel Shear Wall with Burring Hole

    Tetsuro HAYASHI, Atsushi SATO

    2021.02  -  2021.02 

  • Experimental Study on Square Hollow Section Column Subjected to Compressive Axial Force with Bending Moment Having Different Width-Thickness Ratio

    Takuro HAYASHI, Atsushi SATO

    2021.02  -  2021.02 

display all >>

Other research activities

  • Frontier Research Institute (FRIIS)

    2019.03  -  2019.03

  • NITech International Symposiumn

    2018.09  -  2018.09

    Seismic Design Procedure of the Steel Structure: Past, Present, and Future
    On-going Research

    <From USA>
    Chia-Ming Uang
    (Professor, University of California, San Diego)
    Jason P. McCormick
    (Associate Professor, University of Michigan)
    <from EUROPE>
    Dan Dubina
    (Professor, Politehnica University Timisoara, Rumania)
    Mario D'Aniello
    (Assistant Professor, University of Naples "Federico II", Italy)
    <from JAPAN>
    Taichiro Okazaki
    (Professor, Hokkaido University)
    Atsushi SATO
    (Associate Professor, Nagoya Institute of Technology)

  • Frontier Research Institute (FRIIS)

    2018.07  -  2018.08

  • Frontier Research Institute (FRIIS)

    2018.07  -  2018.08

Academic Awards Received

  • AIJ Young Researcher Award 2019

    2019.09.03    

    Winner: Atsushi SATO

  • SEEBUS AWARD

    2009.12    

    Winner: Atsushi Sato

  • Best Paper of JSSC

    2005.11.17    

    Winner: Tetsuro Ono, Atsushi Sato

Grant-in-Aid for Scientific Research

  • Structural performance evaluation of building H-shape steel column under seismic load action

    Grant-in-Aid for Scientific Research(C)

    Project Year: 2019.04  -  2022.03  Investigator(s): Atsushi SATO

  • Deformation Capacity of the Beam-Column subjected to Axial Force with Bending Moment

    Grant-in-Aid for Scientific Research(C)

    Project Year: 2015.04  -  2018.03  Investigator(s): Atsushi SATO

  • Evaluation of stability of lightweight steel sheet steel structure and its application to efficient shape and form development of earthquake resistant structure

    Grant-in-Aid for Scientific Research(B)

    Project Year: 2014.04  -  2017.03 

Other external funds procured

  • Fundação para a Ciência e a Tecnologia (FCT): ClimateSAFE

    Offer organization: Foreign Countries  Fundação para a Ciência e a Tecnologia (FCT): ClimateSAFE

    Project Year: 2021  -  2025  Investigator(s): Luís Simões da Silva

  • Joint Research Projects within the Executive Program of Cooperation in the Field of Science and Technology between Italy-Japan

    Offer organization: Foreign Countries  Joint Research Projects within the Executive Program of Cooperation in the Field of Science and Technology between Italy-Japan

    Project Year: 2021  -  2023  Investigator(s): GIANVITTORIO RIZZANO

    This research project will develop a completely novel technology for the construction of new types of structures through the prototyping of composite steel decks made with a core of metal foam. The main features of the proposed panels will be the low-weight, the biomimetic structure (i.e. materials with cellular structure inspired from biological micro-structures) able to mitigate buckling, the improved sustainability, the blast mitigation capacity and high energy absorption.
    The development of new products, together with the definition of design rules established in the framework of European and Japanese codes will promote the introduction of the proposed Steel-Foam-Steel (SFS) panels in the design practice. Considering that no applications of metal foams in civil engineering exist, all the experimental work done and the codification efforts, will represent a breakthrough for the market and an important reference for the forthcoming studies. The scientific work developed jointly between Italy and Japan it is expected to open unexplored fields of applicative research.
    The project will improve the cooperation between the Italian and Japanese parties enabling the two research groups to share the common experiences to solve problems which affect both countries. In particular, the proposal is specifically devoted to seismic and sustainability issues which both Italy and Japan need to target in order to improve safety, health and quality of life of their populations. The project will result in new solutions which will be used effectively in both countries.

  • JICA Partnership Program (JPP)

    Offer organization: Japan International Cooperation Agency  JICA Partnership Program (JPP)

    Project Year: 2014.12  -  2018.12  Investigator(s): Keisuke Kitagawa

Joint Research activities

  • Advanced Materials for Light and Sustainable Constructions in seismic zone

    Offer organization: Allied Tube & Condit, Inc.   International Collaboration  

    Project Year: 2007.01  -  2007.12  Investigator(s): Chia-Ming Uang

 
 

Academic Activity

  • 2020.12
    -
    Now

    IABSE (International Association for Bridge and Structural Engineering),Symposium/ Prague   Scientific Committee

  • 2020.04
    -
    Now

    Japanese Society of Steel Construction  

  • 2020.04
    -
    Now

    SEEBUS (The Japan-Korea-Taiwan Joint Seminar on Earthquake Engineering for Building Structures)   Coordinator

  • 2018.10
    -
    2019.09

    SDSS (THE INTERNATIONAL COLLOQUIUM ON STABILITY AND DUCTILITY OF STEEL STRUCTURES)   Scientific Committee

  • 2015.01
    -
    Now

    American Iron and Steel Institute COFS Framing Design Subcommittee  

  • 2015.01
    -
    Now

    American Iron and Steel Institute COFS Lateral Design Subcommittee  

  • 2013.06
    -
    Now

    Japanese Society of Steel Construction  

  • 2013.04
    -
    Now

    The Building Center of Japan  

  • 2013.04
    -
    Now

    The Building Center of Japan  

  • 2012.05
    -
    Now

    Japanese Society of Steel Construction  

display all >>

Social Contribution

  • [Special Seminar] CFS-SBMF Design Procedure Development for Multi-Story Systems (Italy)

    University of Bergamo (UB, Italy)   Special Seminar in UB  (University of Bergamo (UB, Italy) )  2019.09  -  2019.09

  • [Special Seminar] Building Structure Using Thin Sheet Section Steel and Light Steel Frame (Indonesia)

    Kakefu Baja Industri Indonesia  Meeting with Professors in Bandung Institute of Technology (ITB, Indonesia)  (KAPLA Hilton Hotel Bandung)  2019.06  -  2019.06

  • [Special Seminar] Seismic design of steel structures according to Japanese experience: Code and Research (Italy)

    University of Naples, Federico II (UNINA, Italy)   Special Seminar in UNINA  (University of Naples, Federico II (Italy) )  2019.03  -  2019.03

  • [Special Seminar] Seismic Design Procedure of the Steel Structures combined with the Steel Damping Systems (Romania)

    Politehnica University of Timișoara (UPT, Romania)   Special Seminar in UPT  (Politehnica University of Timișoara (UPT, Romania) )  2018.11  -  2018.11

  • [Special Seminar] How to design building structure under seismic load effects (Indonesia)

    Bandung Institute of Technology (ITB, Indonesia)  Special Seminar in ITB  (Bandung Institute of Technology (ITB, Indonesia))  2018.08  -  2018.08