SATO Hisashi

写真a

Affiliation Department etc.

Department of Physical Science and Engineering
Department of Physical Science and Engineering

Title

Associate Professor

Mail Address

E-mail address

Graduating School

  •  
    -
    1998.03

    Shinshu University   Faculty of Textile Science and Technology   Department of FunctionalMachinery and Mechanics   Graduated

Graduate School

  •  
    -
    2004.03

    Tokyo Institute of Technology  Graduate School, Division of Integrated Science and Engineering  Department of Innovative and Engineered MaterialsDoctor's Course  Completed

  •  
    -
    2000.03

    Tokyo Institute of Technology  Graduate School, Division of Integrated Science and Engineering  Department of Innovative and Engineered MaterialsMaster's Course  Completed

Degree

  • Tokyo Institute of Technology -  Doctor (Engineering)

External Career

  • 2004.05
    -
    2005.04

      Researcher  

  • 2004.04
     
     

      Researcher  

Field of expertise (Grants-in-aid for Scientific Research classification)

  • Structural/Functional materials

  • Metal making/Resorce production engineering

  • Material processing/Microstructural control engineering

  • Composite materials/Surface and interface engineering

  • Materials/Mechanics of materials

display all >>

 

Research Career

  • Development of grain refiner for Al cast

    International Collaboration   Cooperative Research  

    Project Year:  2009.10  -  2010.09

    This study tries to improve the grain refinement ability of commercial grain refiner without the change of its composition.

  • Growth process of martensite in Fe alloys using high resolution EBSD

    Individual   Grant-in-Aid for Scientific Research  

    Project Year:  2009.04  -  2011.03

    This study investigate about growth mechanism of martensite in Fe alloys using EBSD.

  • Development of metallic-based fuctionally graded materials dispersed nano-particle

    Collaboration in Japan   Government and People Interchange Joint Research  

    Project Year:  2007.04  -  2013.03

    This study tries to develop the fabrication method of fuctionally graded material containing nano-particles using centrifugal cast

  • 3D visualization of microstructure of metallic materials using high-resolution EBSD

    Collaboration in Japan   Grant-in-Aid for Scientific Research  

    Project Year:  2007.04  -  2013.03

    This study investigates about 3D-microstructure of martensite in Fe alloy by serial sectioning.

  • Optimization of the distribution of dispersoids in Cu-based dispersion hardened alloy for improvement of wear resistance

    Individual   (not selected)  

    Project Year:  2006.04  -  2011.03

    This study investigates to optimize the distribution of dispersoids in Cu-based dispersion hardened alloy for improvement of wear resistance

Papers

  • Formation process of the {001} fiber texture on iron particles using simple ball milling

    S. Motozuka, T. Ikeda, T. Miyagawa, H. Sato and M. Morinaga

    Powder Technology   321   9 - 12   2017.08  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Oxidation of Ti-Nb-Ta-Zr Alloy by Atmospheric Pressure Plasma Treatment

    Eri Miura-Fujiwara, Shimpei Matsutake, Yuu Suzuki, Ito Michiko, Motoko Yamada, Seigo Takashima, Hisashi Sato, Yoshimi Watanabe

    Proceedings of the Biomaterials International 2017     1143-1 - 1143-2   2017.08  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • Effects of Heterogeneous nucleation site particles on formability and microstructure of additive manufactured Ti-6Al-4V samples

    Yoshimi Watanabe, Masafumi Sato, Tadachika Chiba, Hisashi Sato, Naoko Sato, Shizuka Nakano

    Proceedings of the Biomaterials International 2017     1160-1 - 1160-2   2017.08  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • Microstructure of Al-Al3Ti functionally graded materials fabricated by centrifugal solid-particle method and centrifugal in-situ method

    Yoshimi Watanabe, Qi Zhou, Hisashi Sato, Toshiyuki Fujii, Tomonari Inamura

    Japanese Journal of Applied Physics   56 ( 1S ) 01AG01-1 - 01AG01-11   2017.01  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Effects of work-hardening rate on formation of nanocrystallized subsurface layer in Cu alloys

    Hisashi Sato, Yuya Kaneko, Yoshimi Watanabe

    Japanese Journal of Applied Physics   56 ( 1S ) 01AE05-1 - 01AE05-5   2017.01  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Decomposition of Al2.7Fe0.3Ti in heated Al–Al2.7Fe0.3Ti refiner fabricated by spark plasma sintering and its refining performance

    Yoshimi Watanabe, Takayuki Hamada, Hisashi Sato

    Japanese Journal of Applied Physics   56   01AG02-1 - 01AG02-7   2017.01  [Refereed]

    Research paper (scientific journal)   Single Author

  • Microstructure and wear property of Al-Al3Ti FGMs fabricated by centrifugal solid-article and in-situ methods

    Yoshimi Watanabe, Qi Zhou, Hisashi Sato

    Conference paper for the ISFMGs 2016     134 - 137   2016.09  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • Grain refinement performance of pure Al by unstable nucleation sites

    Yoshimi Watanabe, Hisashi Sato

    Proceedings of The 9th Pacific Rim International Conference on Advanced Materials and Processing, PRICM 2016     332 - 337   2016.08  [Refereed]

    Research paper (international conference proceedings)   Multiple Authorship

  • Fabrication of Fe-Mn-Si-Cr shape memory alloy Fiber/Aluminum matrix smart composite Induced by shape memory effect

    Yoshimi Watanabe, Akihiro Yamamura, Hisashi Sato

    Materials Transactions   57 ( 5 ) 590 - 599   2016.05  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

  • Investigation of continuous deformation behavior around initial yield point of single crystal copper by using micro scale torsion test

    Kozo Koiwa, Nobuyuki Shishido, Chuantong Chen, Masaki Omiya, Shoji Kamiya, Hisashi Sato, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Toshiaki Suzuki, Takeshi Nokuo

    Scripta Materialia   111 ( 15 ) 94 - 97   2016.01  [Refereed]

    Research paper (scientific journal)   Multiple Authorship

display all >>

Books

  • Advances in Metallic Biomaterials Technology, Processing and Applications

    Yoshimi Watanabe, Hisashi Sato, Eri Miura-Fujiwara (Part: Multiple Authorship ,  Chapter 9 Functionally Graded Metallic Biomaterials )

    Springer Berlin Heidelberg  2015.07

  • Nanocomposites with Unique Properties and Applications in Medicine and Industry

    Yoshimi Watanabe, Hisashi Sato (Part: Multiple Authorship ,  Review Fabrication of Functionally Graded Materials under a Centrifugal Force )

    InTech - Open Access Publisher  2011.08 ISBN: 978-953-307-351-4

Review Papers

  • A study on formation mechanism of butterfly martensite by in-situ observation using EBSD

    H. Sato

    Bulletin of The Iron and Steel Institute of Japan ( Iron and Steel Institute of Japan )  13 ( 5 ) 47   2008.08

    Introduction and explanation (international conference proceedings)   Single Author

  • Fabrication of intermetallic fiber / metal matrix composites by a reaction at narrow holes method

    Y. Watanabe, H. Sato, Y. Tanaka, I-S. Kim

    Sen'i gakkaishi   62 ( 9 ) 22 - 23   2006.09

    Introduction and explanation (scientific journal)   Multiple Authorship

Presentations

  • Grain Refinement of Aluminum Cast by Heterogeneous Nucleation Sites of L12 modified Al3Ti

    Yoshimi Watanabe, Hisashi Sato

    The 2nd International Conference on Light Materials – Science and Technology (LightMAT 2017)   (Maritim Hotel & Congress Centrum Bremen, Bremen, Germany)  2017.11  -  2017.11 

  • Improvement of Microstructure of Selective Laser Melted Aluminum by Heterogeneous Nucleation Mechanism

    Hiroyuki Sugano, Yoshimi Watanabe, Hisashi Sato, Tadachika Chiba, Shizuka Nakano, Naoko Sato

    The 2nd International Conference on Light Materials – Science and Technology (LightMAT 2017)   (Maritim Hotel & Congress Centrum Bremen, Bremen, Germany)  2017.11  -  2017.11 

  • Effects of Heterogeneous Nucleation Site Particles on Formability and Microstructure of Additive Manufactured Ti-6Al-4V Samples

    Yoshimi Watanabe, Masafumi Sato, Tadachika Chiba, Hisashi Sato, Naoko Sato, Shizuka Nakano

    Biomaterials International 2017  (Fukuoka Convention Center (FCC) in Fukuoka)  2017.08  -  2017.08 

  • Oxidation of Ti-Nb-Ta-Zr Alloy by Atmospheric Pressure Plasma Treatment

    Eri Miura-Fujiwara, Shimpei Matsutake, Yuu Suzuki, Ito Michiko, Motoko Yamada, Seigo Takashima, Hisashi Sato, Yoshimi Watanabe

    Biomaterials International 2017  (Fukuoka Convention Center (FCC) in Fukuoka)  2017.08  -  2017.08 

  • Mechanism of reverse transformation induced by shot-peening for Fe-33mass%Ni alloy

    Hisashi Sato, Nagomi Tsuboi, Tadachika Chiba and Yoshimi Watanabe

    International Conference on Martensitic Transformations (ICOMAT 2017)  (Chicago, USA)  2017.07  -  2017.07 

  • Fabrication of Nano-diamond/Silicon Carbide Composite Abrasives Dispersed Functionally Graded Materials by Centrifugal Sintered-Casting and Its Drilling Performance for CFRP Laminates

    T. Kunimine, K. Kurachi, H. Tsuge, M. Yamada, H. Sato and Y. Watanabe

    The 4th International Conference on Powder Metallurgy in Asia (APMA 2017)  (Hsinchu, Taiwan)  2017.04  -  2017.04 

  • Effects of TiC Particles on Microstructure of Additively ManufacturedTi-6Al-4V Fabricated by Selective Laser Melting Method

    Masafumi Sato, Yoshimi Watanabe Hisashi Sato, Tadachika Chiba, ShizukaNakano, Naoko Sato, Toru Shimizu

    The 4th International Conference on Powder Metallurgy in Asia (APMA 2017)  (Hsinchu, Taiwan)  2017.04  -  2017.04 

  • Drilling of CFRP Composites by Gyro-driving Grinding Wheel System with Copper/Diamond Functionally Graded Grinding Wheel

    T. Kunimine, H. Tsuge, D. Ogawa, M. Yamada, H. Sato, Y. Watanabe

    21st International Conference on Wear of Materials (WOM 2017)  (Long Beach, California, USA)  2017.03  -  2017.03 

  • Formation Process of Nanocrystallized Layer in Fe-Ni Alloy by Sliding Wear

    Hisashi Sato, Ryo Tsuzuki, Tadachika Chiba, Yoshimi Watanabe

    The 9th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials (ISPlasma2017)  (Chubu University)  2017.03  -  2017.03 

  • Formation of L12 Modified Al2.5Cu0.5Ti Phase by Heat Treatment of Spark Plasma Sintered Cu/Al3Ti Specimens

    Yoshimi Watanabe, Takaaki Hirako, Kazuaki Hirata, Hisashi Sato

    The 9th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials (ISPlasma2017)  (Chubu University)  2017.03  -  2017.03 

display all >>

Academic Awards Received

  • The Sawamura Award

    2010.03.28    

    Winner: Hisashi Sato, Stefan Zaefferer, Yoshimi Watanabe

 
 

Academic Activity

  • 2013.08
    -
    Now

    The Japan Institute of Metals  

  • 2013.03
    -
    2015.03

    The Japan Institute of Metals  

  • 2011.04
    -
    2012.03

    The Iron and Steel Institute of Japan  

  • 2010.09
     
     

    The Japan Society of Mechanical Engineers  

  • 2010.04
    -
    Now

    The Japan Institute of Light Metals